Cooling and heating are extremely important in many industrial applications, while the thermal performance of these processes generally depends on many factors, such as fluid flow rate, inlet temperature, and many more. Hence, tremendous efforts are dedicated to the investigation of several parameters to reach an efficient cooling or heating process. The interest in adding nanoparticles in regular heat transfer fluids delivered new fluids to the market, the nanofluids. In this paper, a new nanoparticle-enhanced fluid based on polyethylene glycol with ZnO nanoparticles is considered and its hydrothermal performance is investigated for HVAC applications. The thermophysical properties of PEG 400—ZnO and their variation with temperature at different nanoparticle loading are previously determined on experimental bases and here implemented in a numerical application. The numerical results are completed at Reynolds number from 200 to 2000, while the nanoparticle concentration varies from 0.5 to 5%. Results are discussed in terms of Nusselt number, friction factor, and dimensionless pressure drop ratio at different temperatures and ZnO loading in the PEG 400 base fluid. Additionally, the evaluation performance criteria (EC) are calculated and discussed. Concluding, the newly developed fluid enhances the heat transfer up to 16% with a 13% pressure drop penalty, while the performance evaluation criteria are enhanced. Plus, several correlations are developed for both Nusselt number and friction factor as a function of relevant operating conditions.
23 March 2021 in Environmental Science and Pollution Research
One of most reduction reasons of simple conventional solar still productivity is the coupling between high solar intensity and the high ambient temperature in the same time. The high intensity increases the saline water temperature, while the outside temperature increases the glass temperature, and consequently reduction in saline water and glass temperature difference leads to reduction in condensation and productivity. The present theoretical study focuses on the completion of the absorbed solar energy in the basin to be constant during the day. The basin water will be in high temperature level all day especially at the time of low outside temperature far away the noon. The absorbed heat in the basin is held constant at αwImax by extra heat from wind turbine power with battery storage system all day hours. The results show that the solar still productivity with constant heat supply is more than that with same amount of variable energy during sun rise time only (6 AM to 6 PM) by 69.133%. So, constant absorbed heat in the water basin (αwImax) through the 24 h of the day enhances the performance with productivity up to 248% with the hybrid solar and electric power consumption of the wind turbine power. The water in the basin is held constant at 2 cm via makeup water to compensate the evaporation rate.