S. Dhanalakshmi

Dr. S. Dhanalakshmi

KLE Technological University, Hubli, India
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2017 in Journal of King Saud University – Engineering Sciences
Verified
Journal Article
Open access
RPRamadevi Punyamurthy
Ramadevi Punyamurthy
S. DhanalakshmiS. Dhanalakshmi
S. Dhanalakshmi
RRRaghu Patel G. Ranganagowda
Raghu Patel G. Ranganagowda
BBBasavaraju Bennehalli
Basavaraju Bennehalli
SVSrinivasa C V
Srinivasa C V
Untreated abaca fibers and benzenediazonium chloride treated abaca strands were employed as reinforcements for fabricating polypropylene composites by injection molding method. Various composites were fabricated with different fiber loadings of 30%, 35%, 40%, 45% and 50% with and without coupling agents. Abaca composites without coupling agents with 40% fiber loadings were found to have optimum properties when mechanical characterization was done and the investigation also revealed that untreated and treated composites with coupling agents were found to have improved tensile strength, flexural strength and impact strength when correlated to composites without coupling agents. Among various surface modifications performed, benzenediazonium chloride treated abaca strands reinforced polypropylene composites with coupling agents showed superior properties. For composites including coupling agents, surge in tensile strength and flexural strength was observed with hike in fiber content up to 50% whereas optimum impact properties were shown at 40% fiber loading. Between untreated composites with coupling agent and without coupling agent, composites with coupling agent showed 77.50% hike in tensile strength for 50% fiber loading. Benzenediazonium chloride treated composites with coupling agent showed 70.07% increase in tensile strength when compared to benzenediazonium chloride treated composites without coupling agent for 50% fiber loading. Untreated composites with coupling agent showed 64.91% increase in flexural strength when compared to untreated composites without coupling agent for 50% fiber loading. Benzenediazonium chloride treated composites with coupling agent showed 36.84% increase in flexural strength when compared to benzenediazonium chloride treated composites without coupling agent for 50% fiber loading. However, in case of impact strength, addition of coupling agent increased the impact strength up to 35% fiber loading and beyond 35% fiber loading addition of coupling agent decreased the impact strength. Untreated composites with coupling agent showed 3.53% decrease in impact strength when compared to untreated composites without coupling agent for 40% fiber loading. Benzenediazonium chloride treated composites with coupling agent showed 6.59% decrease in impact strength when compared to benzenediazonium chloride treated composites without coupling agent for 40% fiber loading

1 September 2017 in Ciência & Tecnologia dos Materiais
Verified
Journal Article
Closed access
SKSakshi S. Kamath
Sakshi S. Kamath
S. DhanalakshmiS. Dhanalakshmi
S. Dhanalakshmi
BBBasavaraju Bennehalli
Basavaraju Bennehalli

22 July 2022 in Biosensors
Verified
Journal Article
Open access
PDF file
YSYogesh M. Shanbhag
Yogesh M. Shanbhag
ASA Shanbhag
A Shanbhag
SMShweta J. Malode
Shweta J. Malode
S. DhanalakshmiS. Dhanalakshmi
S. Dhanalakshmi
Kunal MondalKunal Mondal
Kunal Mondal
NSNagaraj P. Shetti
Nagaraj P. Shetti
Pramipexole (PMXL) belongs to the benzothiazole class of aromatic compounds and is used in treating Parkinson’s disease; however, overdosage leads to some abnormal effects that could trigger severe side effects. Therefore, it demands a sensitive analytical tool for trace level detection. In this work, we successfully developed an electrochemical sensor for the trace level detection of PMXL, using the voltammetric method. For the analysis, graphitic carbon nitride (gCN) was opted and synthesized by using a high-temperature thermal condensation method. The synthesized nanoparticles were employed for surface characterization, using transmission electron microscopy (TEM), X-ray diffraction (XRD), and atomic force microscopy (AFM) techniques. The electrochemical characterization of the material was evaluated by using the electrochemical impedance spectroscopy (EIS) technique to evaluate the solution–electrode interface property. The cyclic voltammetry (CV) behavior of PMXL displayed an anodic peak in the forward scan, indicating that PMXL underwent electrooxidation, and an enhanced detection peak with lower detection potential was achieved for gCN-modified carbon paste electrode (gCN·CPE). The influence of different parameters on the electrochemical behavior was analyzed, revealing the diffusion governing the electrode process with an equal number of hydronium ions and electron involvement. For the fabricated gCN·CPE, good linearity range was noticed from 0.05 to 500 µM, and a lower detection limit (LD) of 0.012 µM was achieved for the selected concentration range (0.5 to 30 µM). Selectivity of the electrode in PMXL detection was investigated by conducting an interference study, while the tablet sample analysis demonstrates the sensitive and real-time application of the electrode. The good recovery values for the analysis illustrate the efficiency of the electrode for PMXL analysis.

8 December 2015 in Science and Engineering of Composite Materials
Verified
Journal Article
Open access
S. DhanalakshmiS. Dhanalakshmi
S. Dhanalakshmi
PRPunyamoorthy Ramadevi
Punyamoorthy Ramadevi
BBBasavaraju Bennehalli
Basavaraju Bennehalli
Areca fibers have a great prospect in the polymer composite field since they possess superior properties like being light weight, strong and having high strength-to-weight ratio. In addition, areca fibers are biodegradable, non-toxic and eco-friendly and have low maintenance cost. In this research work, areca fibers were subjected to chemical treatments such as NaOH, KMnO 4 , C 6 H 5 COCl and H 2 C=CHCOOH to reduce the hydrophilic nature of areca fibers and to improve interfacial adhesion between areca fibers and thermoplastic polypropylene matrix, so that areca-polypropylene composites with improved properties can be obtained. The untreated and all chemically treated areca-polypropylene composites with 30%, 40%, 50%, 60% and 70% fiber loadings were fabricated by the compression molding technique. Investigations of tensile, flexural and impact properties of areca fiber reinforced polypropylene composites were done under given fiber loadings by following American Standard for Testing Materials (ASTM) standard procedures. Amongst all untreated and chemically treated areca-polypropylene composites, acrylated areca-polypropylene composites with 60% fiber loading showed higher tensile and flexural strength values and with 50% fiber loading showed higher impact strength values. Hence, chemically treated areca-polypropylene composites can be considered as a very promising material for the fabrication of lightweight material industries.

1 July 2015 in Ciência & Tecnologia dos Materiais
Verified
Journal Article
Closed access
S. DhanalakshmiS. Dhanalakshmi
S. Dhanalakshmi
RPRamadevi Punyamurthy
Ramadevi Punyamurthy
BBBasavaraju Bennehalli
Basavaraju Bennehalli
SVSrinivasa C V
Srinivasa C V

1 July 2014 in Ciência & Tecnologia dos Materiais
Verified
Journal Article
Closed access
RPRamadevi Punyamurthy
Ramadevi Punyamurthy
S. DhanalakshmiS. Dhanalakshmi
S. Dhanalakshmi
RRRaghu Patel Ranganagowda
Raghu Patel Ranganagowda
BBBasavaraju Bennehalli
Basavaraju Bennehalli
PBPramod Badyankal
Pramod Badyankal
SVSrinivasa C V
Srinivasa C V