Department of Chemistry, Alva’s Institute of Engineering & Technology, Affiliated to Visvesvaraya Technological University, Mijar-574225, Karnataka, India
Auto-generated profile, based on publicly available information
Sakshi Shantharam Kamath
Department of Chemistry, Alva’s Institute of Engineering & Technology, Affiliated to Visvesvaraya Technological University, Mijar-574225, Karnataka, India
In areca empty fruit bunch, fibres are packed strongly with hemicelluloses, lignin and with slight deposition of wax and inorganic elements. In the work reported, for the extraction of cellulose from the raw areca fibres, formic acid (20% v/v) and hydrogen peroxide (10% v/v) were used and the yield of 65% cellulose was attained. To know α-cellulose content with crystallinity, XRD diffractions studies were carried and the values were found to be 93% and 71% respectively. FTIR spectral studies confirm the absence of hemicellulose, lignin and wax in the cellulose extracted from areca fibres. The morphological studies provided the evidence for isolated fibres and removal of deposits in the extracted cellulose.
Nanofillers are one of the most important additives in the creation of natural fibre reinforced polymer composite (NFRPC), as they greatly improve the properties of the material even at low doses. Such Nanofillers enhance the bonding of fibers and matrix that result in an increase of the mechanical and functional properties of composite. Clays, nanomaterials of carbon, metal and metal oxide nanoparticles, cellulose nanocrystals are some of the most prevalent Nano fillers. NFRPC, with the current advantages of low cost, renewability, biodegradability, and desirable specific properties, have taken off as an alternative to synthetic composites in biomedical applications. Although such composites present the advantage of desirable mechanical strength, thermal stability, and acoustic performance, the addition of Nanofillers enhances the performance further by increasing structure-property associations and processing. Also, Nano filler-enhanced composites have a promising biomedical future, especially when used in tissue engineering, wound healing, antimicrobial systems, and load bearing implants. The review is a compilation of recent developments of natural and synthetic nano filler applications in combination of natural fibers and is therefore a complete reference to any researcher or scientist who will be interested in designing high-performance composites by the synergistic combination of fibers, polymer matrices, and Nanofillers.
Natural fibre composites are playing great role in current life scenario where the focus is more on replacing synthetic fibre composites with natural fibre composites. In this current study, investigation was done on tensile and flexural behaviour of benzoyl peroxide treated areca sheath fibre epoxy composites. The surface modification of the fibre was confirmed by FTIR analysis. Treatment concentration was the major criteria which effects mechanical properties of the composites. At 4% concentration tensile strength and flexural strength was found to be maximum which was reported as 37.05 N/mm2 and 235.5 N/mm2 respectively which gradually decreased with increasing concentration of benzoyl peroxide. SEM analysis proved that at lesser concentration, the bonding between fibre and resin was effective which reduced as the concentration of benzoyl peroxide increased. This results in ineffective stress transfer between reinforcing material and the matrix which was the reason for failure of composites manufactured at higher treatment concentration.