The on‐chip optical power splitter is a common and important device in photonic integrated circuits (PICs). To achieve a low insertion loss and high uniformity while splitting the guided light, multi‐mode interferometer‐based structures utilizing a self‐imaging principle are widely used mainly in the form of a 1 × 2 configuration. Recently, an inverse design method for nanophotonic devices has emerged to overcome the limited capability of the conventional design methods and make it possible to explore the vast number of design parameters. Because of the non‐intuitive shape of inverse‐designed structures, they allow us to discover interesting and complex optical responses which are almost impossible to find with conventional design methods. Here, we report two kinds of inverse‐designed 1 × 4 optical power splitters composed of silicon bars of different lengths, which are fabricated with a standard CMOS‐compatible process. The particle swarm optimization method was used to minimize the insertion loss and divide the power evenly into each output port with finite‐difference time‐domain method simulation. The first optical power splitter has a compact size of 8.14 × 12 μm 2 and the second optical power splitter has an even more compact size of 6.0 × 7.2 μm 2 . With the inverse designed structures, we fabricated the chip with a CMOS‐compatible fabrication process. Experimental verification of the structures is provided and good agreement with the numerical results is obtained. The first 1 × 4 optical power splitter has a low insertion loss of less than 0.76 dB and uniformity of less than 0.84 dB, and the second more compact optical power splitter has a low insertion loss of less than 1.08 dB and uniformity of less than 0.81 dB. As the complexity of on‐chip photonic systems has steadily increased, the inverse design of photonic structures holds great potential to be an essential part of advanced design tools.
We demonstrate wide-angle beam-steering using an optical phased array (OPA) with waveguide radiators designed with non-uniform widths to reduce the crosstalk between waveguides. The OPA consists of a silicon based 1 × 16 array of electro-optic phase shifters and end-fire radiators. The 16 radiators were configured with four different widths and a half-wavelength spacing, which can remove the higher-order diffraction patterns in free space. The waveguides showed a low crosstalk of −10.2 dB at a wavelength of 1540 nm. With phase control, the OPA achieved wide beam-steering of over ±80° with a side-lobe suppression of 7.4 dB.
13 December 2021 in IEEE Transactions on Electron Devices
In this article, we experimentally demonstrate an on-chip optical power monitoring at the near-infrared spectral region (1520–1600 nm) using the waveguide bolometric detector with a TiO x /Ti/TiO x tri-layer film based on the silicon-on-insulator (SOI) platform. For the incident light absorption causing a heat generation, a heavily doped ( ${n}^{+}$ ) Si waveguide is introduced to utilize the mechanism of free-carrier absorption (FCA), and a metal (Au) strip is deposited onto the ${n}^{+}$ Si waveguide to further enhance the light absorption. A bolometric material of TiO x /Ti/TiO x tri-layer film is integrated for the thermal-to-electrical conversion. As a result, it exhibits superior performances, which are the temperature coefficient of resistance (TCR) of −2.296%/K and the maximum sensitivity of −46.45%/mW with a low wavelength-dependency. In addition, a rapid response time is obtained with the rise/fall time of $24.6 ~\mu \text{s}/29.8 ~\mu \text{s}$ , which is enough for a variety of optical sensing applications. This work demonstrates the waveguide-based bolometric photodetection using the FCA effect, for the first time to our knowledge, which can also be simply extended for the operation wavelength range to the mid-infrared (MIR) spectral region for bio/chemical sensing applications.
We demonstrate beam steering using a passive silica optical phased array (OPA) with wavelength tuning. In this OPA, a constant path difference is built up to assign sequential phase delays with a wavelength variation in arrayed waveguide channels for the beam steering. From as-fabricated 1 × 101 passive silica OPA chips, we successfully achieved beam forming with a transversal divergence angle of 0.57° at a 1548.3-nm wavelength and also beam steering of 15.4° by wavelength tuning of 30.7 nm. Combining a cylindrical lens in front of the end-fire radiators, the longitudinal divergence angle could be reduced from 13.0° to 0.42°. The side-mode suppression ratio of the beam was 10.3 dB at the center position. Through simulation, we analyzed the effects of the phase errors on the beam quality, due to the effective index fluctuation of the waveguide channels, and provided an allowable error range to attain beam forming from the passive OPA.
The authors demonstrate the collimation of a vertically diverged beam emitted from a silicon‐based end‐fire optical phased array (OPA) using an aspheric cylindrical lens. A micro‐cylindrical lens with a numerical aperture of 0.8 was placed near the focal length in front of an 1 × 16 end‐fire OPA with a half‐wavelength (775 nm) radiator array pitch for a 1550 nm wavelength. The lens provided a great collimation effect, reducing the vertical divergence angle from 95.6° to 6.7° during horizontal beam steering over ±30°. The horizontal divergence angle showed some expansion, from 7.6° to 10°, due to the angle‐dependant curvature of the lens and the distance to the lens surface.
The authors demonstrate integrated 1D optical phased arrays (OPAs) for wide‐angle 2D beam‐steering. The 2D OPA consists of 16 1D transversal steering OPAs whose radiators have different grating periods, to assign different longitudinal angles. The transversal steering of each OPA is performed by the phase control of the p‐i‐n electro‐optic phase shifter array. The 1D transversal steering OPAs operate serially, changing the longitudinal radiation angle. The grating radiators were designed with an array pitch of 2 μm, and a varying period in the range of 610–710 nm. The entire 16 × (1 × 16) OPAs were integrated into a small area of 26.5 mm 2 . The obtained transversal/longitudinal beam‐steering range was 46°/44°, respectively, with a wavelength of 1560 nm, which enables wide 2D beam‐steering.