This paper chose multi-index to provide a comprehensive evaluation model to evaluate the use reliability of CNC machine tools as a single assessment indicator is biased. As the number of evaluation factors is huge and it is difficult to get the exact values, a fuzzy theory is applied. Reliability mathematical model and maintainability mathematical model were established based on failure data selected from filed test and calculated the estimation values of reliability indexes. Subsequently, a fuzzy comprehensive evaluation mathematical model of CNC machine tools was constructed which combined fuzzy with comprehensive evaluation theory. Using this model could evaluate reliability level of CNC machine tools accurately and integrative.
26 November 2019 in International Journal of Aerospace Engineering
In order to simplify the manufacturing process or because of the limitation of the propulsion system, business jet, small civil airplane, and turboprop aircraft are always designed without leading-edge slats, which poses a great challenge to the flight safety during takeoff and landing. Focusing on the low-speed stall and poststall conditions, we investigated the aerodynamic characteristics and flow mechanism of high-lift configuration without slats using an improved delayed detached eddy simulation (IDDES) model which is validated by numerical simulations of the Common Research Model (CRM). Based on the analysis of the calculated results, conclusion can be made that the stall behavior of the configurations is directly related to the onset and evaluation of flow separation on the suction side. And through further research, an efficient evaluation method that is capable of qualitatively predicting the stall performance of two-element high-lift configuration by stall angle distribution of wing sections is proposed. By using the evaluation method, together with design rules summarized from the present study, high-lift configuration with mild-stall characteristic can be obtained in the preliminary stage of design.
Flow separation is easily induced at the junctions of aircraft components, and for aircraft with T-type tails, in particular, it can lead to loss of directional stability under a small sideslip angle. In the reported study, improved delayed detached eddy simulation with a shear-layer-adapted length scale based on the k–ω shear-stress transport method was used to analyze and rectify the corner separation at the junctions of the horizontal and vertical parts of the tail of a demonstration aircraft. This was done to (i) suppress the flow separation caused by the complex interaction of the boundary layers on the horizontal and vertical tail parts at their junctions, and (ii) prevent the vertical tail parts from having any separated flow on their pressure and suction sides. The results showed that the main cause of the loss of directional stability was separation flow on the suction sides of the vertical tail parts. The corner flow separation was suppressed significantly by only using fairing cones at the junctions of the horizontal and vertical tail parts, thereby allowing the aircraft to maintain directional stability under a small sideslip angle.
Aeroelastic deformation of the high-aspect-ratio wing from a solar-powered UAV will definitely lead to the difference of its performance between design and actual flight. In the present study, the numerical fluid–structural coupling analysis of a wing with skin flexibility is performed by a loosely coupled partitioned approach. The bidirectional coupling framework is established by combining an in-house developed computational fluid dynamics (CFD) code with a computational structural dynamics (CSD) analysis solver and a time-adaptive coupling strategy is integrated in it to improve the computational stability and efficiency of the process. With the proposed method, the fluid–structure interactions between the wing and fluid are simulated, and the results are compared between the deformed wing and its rigid counterpart regarding the aerodynamic coefficients, transition location, and flow structures at large angles of attack. It can be observed that after deformation, the laminar transition on the upper surface is triggered earlier at small angles of attack and the stall characteristic becomes worse. The calculated difference in aerodynamic performance between the deformed and the designed rigid wing can help designers better understand the wing’s real performance in the preliminary stage of design.
18 August 2020 in International Journal of Aeronautical and Space Sciences
The aileron is one of the most important tools for adjusting the roll attitude of the aircraft, but the surface flow state of the aileron is likely to be affected by high-lift devices. In this paper, by using computational fluid dynamics (CFD) simulations and wind tunnel tests, the Krueger flap effects on the surface flow state of ailerons in a typical blended wing body civil aircraft were investigated. In order to increase the lift, deflecting the Krueger flap makes the flow separation occur on the aileron surface of BWB civil aircraft. This way of the surface stall that the flow separation in the aileron zone first appears at the wing tip rather than at the wing root is unreasonable for civil aircraft. For the above problem, a sensitivity analysis of the design parameters of the Krueger flaps was carried out. The results indicate that the angle of the outboard Krueger flap mainly affects the flow separation of the ailerons. Its length affects the pitch moment tremendously, while its width slot affects the pitch moment slightly. Finally, the design principles of the BWB Krueger flap for the improvement aileron surface flow state were proposed, and the redesign of the BWB high lift configuration significantly improved the flow state of the aileron zone at a minimal cost of aerodynamic characteristics without losing the existing great aerodynamic performance.