The coupled problem of aerodynamic heating and structural heat transfer occupies a very important position in the field of aerospace engineering applications because it directly affects the accurate prediction of aerothermal loads and structural deformation. This paper develops a fluid-thermal-structural coupling framework for the investigation of aerothermalelastic problems in hypersonic flow. A loosely coupled analysis strategy equipped with both the constant and adaptive coupling time step size approaches is adopted to integrate an in-house developed computational fluid dynamics (CFD) code using the finite element solver Abaqus and to perform coupling simulations based on CFD/computational thermal and structural dynamics (CTSD). The accuracy, reliability, and capability of the aerodynamic heating and fluid-thermal-structural coupling analysis methods in this framework have been validated by a spherically blunted cone and a cylindrical leading-edge model in a hypersonic environment. A typical low-aspect ratio hypersonic wing is adopted as the computational model to study in detail the impact of sustained aerothermodynamic loads on the aeroheating process, structural deformation characteristics, and aerodynamic performance. The results indicate that the aerodynamic heating effect obviously weakens the structure stiffness and, thereby, directly leads to a significant increment in wing structural deformation. Consequently, the pressure distribution and aerodynamic coefficients of the wing also change significantly after aerothermoelastic deformation. Therefore, the influence of aerodynamic heating on the aerothermoelastic behaviors of a hypersonic wing should be considered seriously in the design stage to avoid unaccepted structural deformation and aerodynamic loss in real flight. Moreover, the loosely coupled analysis strategy equipped with the adaptive coupling time step size approach can be used as a highly efficient simulation method for practical fluid-thermal-structural coupling problems.
7 February 2022 in Engineering Applications of Computational Fluid Mechanics
The aerodynamic characteristics of turboprop aircraft are greatly affected by the running propellers. In this paper, propeller slipstream effects on the static lateral-directional stability characteristics of a typical twin-engine turboprop aircraft with clockwise rotating propellers were investigated through unsteady computational fluid dynamics (CFD) simulations and wind tunnel experiments. The propeller slipstream led to a significant decrease in the lateral static stability contribution of the wing-body-nacelle (WBN), and the most affected wing sections were located near the left boundary of the port propeller slipstream region. Moreover, the influence of the propeller slipstream on the lateral static stability contribution of the vertical tail plane (VTP) significantly altered the rolling moment curve slope of the entire airframe. Due to the effects of the propeller slipstream on the local dynamic pressure and therefore the effectiveness of the VTP, the aircraft showed significantly different directional static stability behaviors between the positive and negative sideslip conditions. Furthermore, it was found that the configurations with clockwise rotating propellers readily experience dramatic losses in directional static stability at large negative sideslip angles.
Accurate prediction of the flow around multi-element airfoil is a prerequisite for improving aerodynamic performance, but its complex flow features impose high demands on turbulence modeling. In this work, delayed detached-eddy-simulation (DDES) and zonal detached-eddy-simulation (ZDES) was applied to simulate the flow past a three-element airfoil. To investigate the effects of numerical dissipation of spatial schemes, the third-order MUSCL and the fifth-order interpolation based on modified Roe scheme were implemented. From the comparisons between the calculations and the available experimental result, third-order MUSCL-Roe can provide satisfactory mean velocity profiles, but the excessive dissipation suppresses the velocity fluctuations level and eliminates the small-scale structures; DDES cannot reproduce the separation near the trailing edge of the flap which lead to the discrepancy in mean pressure coefficients, while ZDES result has better tally with the experiment.
26 November 2019 in International Journal of Aerospace Engineering
In order to simplify the manufacturing process or because of the limitation of the propulsion system, business jet, small civil airplane, and turboprop aircraft are always designed without leading-edge slats, which poses a great challenge to the flight safety during takeoff and landing. Focusing on the low-speed stall and poststall conditions, we investigated the aerodynamic characteristics and flow mechanism of high-lift configuration without slats using an improved delayed detached eddy simulation (IDDES) model which is validated by numerical simulations of the Common Research Model (CRM). Based on the analysis of the calculated results, conclusion can be made that the stall behavior of the configurations is directly related to the onset and evaluation of flow separation on the suction side. And through further research, an efficient evaluation method that is capable of qualitatively predicting the stall performance of two-element high-lift configuration by stall angle distribution of wing sections is proposed. By using the evaluation method, together with design rules summarized from the present study, high-lift configuration with mild-stall characteristic can be obtained in the preliminary stage of design.