A hybrid lubricant with improved thermal and tribological properties was developed by blending multiwalled carbon nanotubes (MWCNTs) with alumina-based nanoparticles into cutting fluid at fixed volumetric proportions (10:90). The hybrid cutting fluid was prepared in different volumetric concentrations (0.25, 0.75, and 1.25 vol%), and the tribological properties and contact angles were measured using pin-on-disc tribometry and goniometry, respectively. The study showed a reduction in wear and friction coefficient with increasing nanoparticle concentration. The cutting fluid performance was investigated using minimum quantity lubrication (MQL) in the turning of AISI 304 stainless steel. Regression models were developed for measuring the temperature and tool flank wear in terms of cutting speed, feed, depth of the cut, and nanoparticle concentration using response surface methodology. The developed hybrid nanolubricants significantly reduced the tool flank wear and nodal temperature by 11% and 27.36%, respectively, as compared to alumina-based lubricants.
In the manufacturing industry, during machining, the conventional cutting fluid plays a vital role; however, extravagant use of cutting fluids due to its disposal affects the environment badly. Nowadays, due to these advantages of conventional cutting fluids, alternative methods of conventional cutting fluids or alternative methods are preferred. One of the most preferred methods may be the minimum quantity lubrication technique with conventional or nanoparticle-enriched cutting fluids. The present paper has a compilation of the investigations based on MQL application in different machining processes such as turning, milling, grinding, and drilling. The machining also involves hard-to-machine alloys. The paper discusses cryogenic MQL in brief and opens the domain for work in future. The purpose of this paper is to provide a quick reference for researchers working on the practical use of MQL lubricants with nanopowders dissolved and their application in machining for different materials.
Carbon fiber-reinforced polymer (CFRP) composites are an advanced composite material class due to their remarkable properties such as high load-carrying capacity and low density. CFRP composites have enormous applications in aerospace, biomedical, automobile, etc. Machining the CFRP composite is need of the day, but issues like delamination, fiber pullouts, workpiece damage, etc. have made it difficult. These limitations can be surpassed by the micro-electrochemical corona discharge machining (µ-ECDM) process. Although the process has showcased high process capability and great versatility in machining conducting and non-conducting materials, the process has limitations in machining holes deeper than 300 µm because of insufficient electrolyte supply at the machining zone. Aiding assistance to the process can overcome the limitation by enhancing electrolyte availability. Therefore, an experimental analysis is carried out by generating through holes on the CFRP composite using a tailor-made rotating tool-assisted micro-electrochemical corona discharge machining (RT-µ-ECDM) system. The process parameters, voltage, concentration, duty factor, and tool rotation rate are taken at three levels. The materials removal rate and overcut as machining characteristics were analyzed. The multi-response optimization using JAYA algorithm and R-method is used to obtain the optimal process parameters. The experimental investigation suggests RT-µ-ECDM system can machine through holes on CFRP composite.