Maximum power point tracking (MPPT) techniques are a fundamental part in photovoltaic system design for increasing the generated output power of a photovoltaic array. Whilst varying techniques have been proposed, the adaptive neural-fuzzy inference system (ANFIS) is the most powerful method for an MPPT because of its fast response and less oscillation. However, accurate training data are a big challenge for designing an efficient ANFIS-MPPT. In this paper, an ANFIS-MPPT method based on a large experimental training data is designed to avoid the system from experiencing a high training error. Those data are collected throughout the whole of 2018 from experimental tests of a photovoltaic array installed at Brunel University, London, United Kingdom. Normally, data from experimental tests include errors and therefore are analyzed using a curve fitting technique to optimize the tuning of ANFIS model. To evaluate the performance, the proposed ANFIS-MPPT method is simulated using a MATLAB/Simulink model for a photovoltaic system. A real measurement test of a semi-cloudy day is used to calculate the average efficiency of the proposed method under varying climatic conditions. The results reveal that the proposed method accurately tracks the optimized maximum power point whilst achieving efficiencies of more than 99.3%.

A load frequency controller (LFC) is a crucial part in the distribution of a power system network (PSN) to restore its frequency response when the load demand is changed rapidly. In this paper, an artificial neural network (ANN) technique is utilised to design the optimal LFC. However, the training of the optimal ANN model for a multi-area PSN is a major challenge due to its variations in the load demand. To address this challenge, a particle swarm optimization is used to distribute the nodes of a hidden layer and to optimise the initial neurons of the ANN model, resulting in obtaining the lower mean square error of the ANN model. Hence, the mean square error and the number of epochs of the ANN model are minimised to about 9.3886 × 10⁻⁸ and 25, respectively. To assess this proposal, a MATLAB/Simulink model of the PSN is developed for the single-area PSN and multi-area PSN. The results show that the LFC based on the optimal ANN is more effective for adjusting the frequency level and improves the power delivery of the multi-area PSN comparison with the single-area PSN. Moreover, it is the most reliable for avoiding the fault condition whilst achieving the lowest time multiplied absolute error about 3.45 s when compared with the conventional ANN and PID methods.

Maximum power point tracking (MPPT) methods are a fundamental part in photovoltaic (PV) system design for increasing the generated power of a PV array. Whilst several methods have been introduced, the artificial neural network (ANN) is an attractive method for MPPT due to its less oscillation and fast response. However, accurate training data is a big challenge to design an optimized ANN-MPPT technique. In this paper, an ANN-MPPT technique based on a large experimental training data is proposed to avoid the system from having a high training error. Those data are collected during one year from experimental tests of a PV system installed at Brunel University, London, United Kingdom. The irradiation and temperature of weather conditions are selected as the input, and the available power at MPP from the PV system as the output of the ANN model. To assess the performance, the Perturb and Observe (P&O) and the proposed ANN-MPPT methods are simulated using a MATLAB/Simulink model for the PV system. The results show that the proposed ANN method accurately tracks the optimal maximum power point and avoids the phenomenon of drift problem, whilst achieving a higher output power when compared with P&O-MPPT method.

A photovoltaic (PV) power forecasting prediction is a crucial stage to utilize the stability, quality, and management of a hybrid power grid due to its dependency on weather conditions. In this paper, a short-term PV forecasting prediction model based on actual operational data collected from the PV experimental prototype installed at the engineering college of Misan University in Iraq is designed using various machine learning techniques. The collected data are initially classified into three diverse groups of atmosphere conditions—sunny, cloudy, and rainy meteorological cases—for various seasons. The data are taken for 3 min intervals to monitor the swift variations in PV power generation caused by atmospheric changes such as cloud movement or sudden changes in sunlight intensity. Then, an artificial neural network (ANN) technique is used based on the gray wolf optimization (GWO) and genetic algorithm (GA) as learning methods to enhance the prediction of PV energy by optimizing the number of hidden layers and neurons of the ANN model. The Python approach is used to design the forecasting prediction models based on four fitness functions: R², MAE, RMSE, and MSE. The results suggest that the ANN model based on the GA algorithm accommodates the most accurate PV generation pattern in three different climatic condition tests, outperforming the conventional ANN and GWO-ANN forecasting models, as evidenced by the highest Pearson correlation coefficient values of 0.9574, 0.9347, and 0.8965 under sunny, cloudy, and rainy conditions, respectively.