Effective fault diagnosis for mission-critical and safety-critical systems has been an essential and mandatory technique to reduce failure rate and prevent unscheduled shutdown. In this paper, to realize fault diagnosis for a closed-loop single-ended primary inductance converter, a novel optimization deep belief network (DBN) is presented. First, wavelet packet decomposition is adopted to extract the energy values from the voltage signals of four circuit nodes, as the fault feature vectors. Then, a four-layer DBN architecture including input and output layers is developed. Meanwhile, the number of neurons in the two hidden layers is selected by the crow search algorithm (CSA) with training samples. Not only the hard faults such as open-circuit faults and short-circuit faults but also the soft faults such as the component degradation of power MOSFET, inductor, diode, and capacitor are considered in this study. Finally, these fault modes are isolated by CSA-DBN. Compared with the back-propagation neural network and support vector machine fault diagnosis methods, both simulation and experimental results show that the proposed method has a higher classification accuracy that proves its effectiveness and superiority to the other methods.
11 June 2018 in Journal of Intelligent & Fuzzy Systems: Applications in Engineering and Technology
Condition monitoring is an effective methodology to evaluate the health state of power electronics converters. Aiming at multiple devices health state estimation for boost converters, a non-invasive condition monitoring technique is proposed in this paper. Taking the equivalent circuit model of these components into consideration, the formulations of failure precursors with detection signals are derived based on hybrid system theory. Then, the parameter identification problem is translated into an objective function optimization issue. Therefore, the precursor parameter values of inductor, capacitor, diode and power MOSFET can be obtained using crow search algorithm. Meanwhile, the boost converters under variable operating conditions are also analyzed. Compared with particle swarm optimization (PSO) method, both simulations and experiments are conducted to validate the effectiveness of the presented approach. The results show that these parameters can be estimated simultaneously and the identification accuracy of them reaches to more than 90%.