26 June 2020 in IEEE Access
State of health (SOH) estimation is always an important factor in ensuring the reliability and safety of lithium-ion batteries. In view of the shortcomings of the existing SOH estimation methods, such as non-universal, the estimation of different batteries is limited, and the accuracy is insufficient. A fusion estimation method that depends on an empirical degradation model and a data-driven method is proposed. First, we construct an empirical degradation model of lithium-ion battery SOH with charge-discharge cycles. Four working condition characteristics are extracted from the actual charging and discharging process of batteries. Then, with these features as inputs, the prediction error of the empirical degradation model is taken as the output, and training the error compensation model becomes dependent on the data-driven method. The actual working condition characteristics of the tested lithium ion battery are substituted into the training error compensation model, and the model output is fed back to the prediction results of the empirical degradation model. A high-precision estimation of lithium-ion battery SOH is thereby achieved. Finally, the proposed method is verified based on the NASA lithium-ion battery data set. The results show that the fusion method is applicable to different lithium-ion batteries of the same type, and the mean absolute percentage error of SOH estimation is approximately 2%, indicating that the proposed method exhibits good estimation performance and applicability.
30 November 2021 in IEEE Journal of Emerging and Selected Topics in Power Electronics
To improve the diagnostic performance rate of parameter faults in dc–dc converters, obtaining the parameter fault characteristics of dc–dc converters is crucial. This study combines a 1-D convolutional neural network (1DCNN) and long short-term memory (LSTM) with automatic hyperparametric optimization and proposes deep learning models for time-series signal pattern recognition to achieve the dc–dc converter fault diagnosis. First, the 1-D original voltage signal of the dc–dc converters is preprocessed to obtain the labeled sample dataset. The corresponding training set and the test set are obtained. Then, according to the accuracy of the diagnosis, the optimal hyperparameter 1DCNN-LSTM diagnosis model is obtained from an optimization algorithm and the training sets. The model is applied to the test sets to perform feature extraction. Finally, a softmax classifier is used to evaluate the performance of the proposed method. Experimental results show that the proposed method outperforms the classic deep learning and traditional machine learning algorithms. In addition, the evaluation of the method under noise conditions is more challenging and practical.
11 June 2018 in Journal of Intelligent & Fuzzy Systems: Applications in Engineering and Technology
Condition monitoring is an effective methodology to evaluate the health state of power electronics converters. Aiming at multiple devices health state estimation for boost converters, a non-invasive condition monitoring technique is proposed in this paper. Taking the equivalent circuit model of these components into consideration, the formulations of failure precursors with detection signals are derived based on hybrid system theory. Then, the parameter identification problem is translated into an objective function optimization issue. Therefore, the precursor parameter values of inductor, capacitor, diode and power MOSFET can be obtained using crow search algorithm. Meanwhile, the boost converters under variable operating conditions are also analyzed. Compared with particle swarm optimization (PSO) method, both simulations and experiments are conducted to validate the effectiveness of the presented approach. The results show that these parameters can be estimated simultaneously and the identification accuracy of them reaches to more than 90%.
22 July 2019 in IEEE Journal of Emerging and Selected Topics in Power Electronics
To improve the diagnostic accuracy rate of multiple-parameter-faults in widely used power electronic circuits, solving for the overlapping parameter fault characteristic signal is crucial. This paper proposes a novel approach for diagnosing the multiple-parameter-faults of power electronic circuits, that can adaptively adjust the weights of each fault feature parameter according to the diagnostic accuracy rate to enhance their discriminability. According to the properties of multiple-parameter-faults in power electronic circuits, the measured signal that has been decomposed via the variational mode decomposition and wavelet packet energy entropy (VMD-WPEE) is used to extract the feature parameters. Furthermore, a classifier is selected and the threshold of the diagnostic accuracy rate is set. Then, the weight of each fault feature parameter is adjusted until the classifier yields the desired results. Finally, the proposed approach is applied to other classifiers and feature extraction methods. The high accuracy, high robustness, and advantages of the multiple-parameter-faults diagnosis method are demonstrated by the simulation and experimental results.
30 July 2026 in Measurement
26 March 2022 in BCP Social Sciences & Humanities
The supply of basic public services concerns the survival and development of all citizens. Equally enjoying basic public services is the basic right of them, while promoting the equalization of basic public services is the fundamental responsibility of the government. With the continuous advancement of service-oriented government construction, the equalization of basic public services is increasingly valued. Compulsory education is an important part of the basic education system as well as a basic public service, whose development is not only an important way to realize the equality of education, but also an inherent requirement for the equalization of basic public services. At present, there are still some retarding factors in the development of compulsory education. To this end, it is necessary to optimize public policies to promote the balanced development of compulsory education. In this paper, the optimization path of compulsory education policy will be explored through the analysis of the imbalance phenomenon in the supply of basic public services of compulsory education among regions, urban and rural areas, schools and groups, so as to promote the balanced development of compulsory education.