Introduction: The electroencephalographic (EEG) based on the motor imagery task is derived from the physiological electrical signal caused by the autonomous activity of the brain. Its weak potential difference changes make it easy to be overwhelmed by noise, and the EEG acquisition method has a natural limitation of low spatial resolution. These have brought significant obstacles to high-precision recognition, especially the recognition of the motion intention of the same upper limb.Methods: This research proposes a method that combines signal traceability and Riemannian geometric features to identify six motor intentions of the same upper limb, including grasping/holding of the palm, flexion/extension of the elbow, and abduction/adduction of the shoulder. First, the EEG data of electrodes irrelevant to the task were screened out by low-resolution brain electromagnetic tomography. Subsequently, tangential spatial features are extracted by the Riemannian geometry framework in the covariance matrix estimated from the reconstructed EEG signals. The learned Riemannian geometric features are used for pattern recognition by a support vector machine with a linear kernel function.Results: The average accuracy of the six classifications on the data set of 15 participants is 22.47%, the accuracy is 19.34% without signal traceability, the accuracy is 18.07% when the features are the filter bank common spatial pattern (FBCSP), and the accuracy is 16.7% without signal traceability and characterized by FBCSP.Discussion: The results show that the proposed method can significantly improve the accuracy of intent recognition. In addressing the issue of temporal variability in EEG data for active Brain-Machine Interfaces, our method achieved an average standard deviation of 2.98 through model transfer on different days’ data.
To solve the problem of the nonuniform distribution of temperature and electrolytic products in the electrolyte flow field during through-mask electrochemical micromachining, the use of a rotating cathode with surface structures is proposed. The rotation of the cathode increases the efficiency of heat and mass transfer by the electrolyte flow. Simulations are performed to analyze the influence of the type of surface structure, the number of surface structures, and the rotational speed of the cathode on the electrolyte flow field. The results show that the use of a rotating cathode with surface structures significantly improves the mass transfer efficiency of the electrolyte flow field in comparison with a conventional cathode structure, and, in particular, a grooved rotating cathode can increase the outlet flow velocity by about 23%. An experimental demonstration of micropit array processing shows that the use of a grooved rotating cathode increases the mass transfer efficiency by 34% and the processing efficiency by nearly 40% compared with a smooth-surfaced rotating cathode. The grooved rotating cathode also gives the highest machining accuracy. Using this cathode, a uniform micropit array with an average micropit diameter of 201.83 μm, a diameter standard deviation of 3.49 μm, and a depth standard deviation of 0.87 μm is processed.
Coastal wind turbines operate under severe salt spray, high humidity, and wind-driven erosion, which accelerate coating degradation and corrosion-induced cracking. In such environments, corrosion defects exhibit blurred boundaries, weak textures, and significant scale variations, challenging object detectors in small-target localization and precise boundary regression. To address these limitations, this study proposes CoastCor-Net, an enhanced YOLOv11-based framework that improves spatial–semantic alignment, boundary representation, and channel–spatial dependency modeling. The architecture integrates three complementary modules to enhance boundary sensitivity, spatial–semantic consistency, and cross-channel interaction: a Decoding-Driven Enhancement Block, a Complementary Feature Alignment Module, and a Channel-Transposed Coordinate Attention module. Extensive experiments on the Wind Turbine Blade Damage Dataset show that CoastCor-Net achieves 84.7% mAP@0.5 and 54.1% mAP@0.5:0.95, surpassing YOLOv13n by 3.2 percentage points in mAP@0.5 and improving AP_damage by 5.2 percentage points. The framework also demonstrates strong robustness under composite coastal perturbations. These findings highlight the practical effectiveness of structured multi-level feature enhancement for reliable and high-precision blade inspection in complex coastal environments.
In response to the missed and false detections that are easily caused by the large variety of and significant differences among aluminum surface defects, a detection algorithm based on an improved You Only Look Once (YOLO)v8n... | Find, read and cite all the research you need on Tech Science Press
Early forest-fire detection in unmanned aerial vehicle (UAV) imagery is challenged by thin smoke, small flames, low contrast, and complex backgrounds. This paper presents PWM-Net, a computationally efficient detector constructed from a YOLOv11n baseline. PWM-Net replaces the baseline backbone with PartialNet, embeds wavelet convolution (WTConv) in the feature-fusion neck, and introduces a multi-spectral multi-scale (M2S) attention module before the detection heads. The three components respectively improve partial-channel feature extraction, frequency-aware receptive-field modeling, and joint spectral-scale modulation. Across three independent runs, PWM-Net obtains \(81.3\pm0.18\%\) mAP@50 and \(53.7\pm0.22\%\) mAP@50:95 on D-Fire, and \(88.6\pm0.21\%\) mAP@50 and \(70.4\pm0.26\%\) mAP@50:95 on CQ-Fire. The model contains 7·8 M parameters and reaches 145 FPS on an RTX 4090 under batch-one FP32 inference. Ablation and spectral-branch sensitivity analyses indicate complementary contributions from PartialNet, WTConv, and M2S. Embedded-device measurements further demonstrate the deployment efficiency of the model. These results establish a favorable accuracy–efficiency trade-off for UAV-based early forest-fire detection.