To investigate vibration control and optimal design of transmission lines with tuned-mass-damper-inerter (TMDI), the motion equation of transmission lines with TMDI is established in the paper, and the closed-form solutions of the response spectrum of transmission line displacement are derived by the frequency domain analysis method. The design parameters of TMDI are optimized by fixed-point theory, and the vibration control performance of TMDI is discussed. The results show that the increase in apparent mass ratio has a positive effect on the vibration control performance of TMDI; the vibration control performance is greatly affected by frequency ratio and limited by damping ratio; the increase in both mass ratio and apparent mass ratio reduces the peak values of the displacement response spectra of transmission line with TMDI; however, blindly increasing the apparent mass and mass ratio (β > 0.2 or μ > 0.4) has a limited effect on improving the vibration control performance of TMDI; compared with conventional TMD, the peak values of the controlled displacement response spectrum of the transmission line with TMDI can be reduced by about 12%, and TMDI has a better vibration suppression effect on the transmission lines.
To investigate the vibration control capability of a tuned mass damper inerter (TMDI) on a transmission line, the motion equations of the transmission line with TMDI under harmonic excitation were derived. Thus, the closed-form solutions of the displacement response spectrum were obtained by Fourier transform. Based on the colliding bodies optimization (CBO), one of the metaheuristic algorithms, the TMDI parameters, was optimized to minimize the displacement of the transmission line-TMDI system. The research results show that the response of the transmission line was reduced by at least half for different mass ratio and frequency ratio conditions, which indicates that the TMDI can effectively control the displacement response of the transmission line. In addition, the TMDI parameters were optimized by CBO, and the vibration control efficiency was significantly improved. The results of the study show that the data converge quickly with fewer iterations in collision body optimization. On the one hand, CBO avoids getting into local optimization compared to other metaheuristic algorithms. On the other hand, it is cheaper in terms of the cost of its calculations compared to the methods of mathematical derivation. It plays an active role in the optimization of complex structures. The vibration suppression performance of the TMDI after optimization reaches 56–96%.