During the last decade, climate change has generated extreme rainfall events triggering flash floods in short periods worldwide. The delimitation of flood zones by detailed mapping generally makes it possible to avoid human and economic losses, especially in regions at high risk of flooding. The Taguenit basin, located in southern Morocco, is a particular case. The mapping of the flood zones of this basin by the method of the Flood Hazard Index (FHI) in a GIS geographic information systems environment was based on the multi-criteria analysis, taking into consideration the seven parameters influencing these extreme phenomena, namely rainfall, slope, flow accumulation, drainage network density, distance from rivers, permeability, and land use. Average annual rainfall data for 37 years (1980 to 2016) was used in this study for floodplain mapping. A weight was calculated for each parameter using the Analytical Hierarchy Process (AHP) method. The combination of the maps of the different parameters made it possible to draw up a final map classified into five risk intervals: very high, high, moderate, lower and very lower presenting, respectively, 8.04%, 20.63%, 31.47%, 15.36%, and 24.50% of the area of the basin. The reliability of this method was tested by a Flood susceptibility analysis. The results generated by the Flood Hazard Index (FHI) model are similar to those of previous historical events. Realistic and applicable solutions have been proposed to minimize the impact of these floods as much as possible.

An assessment of potential groundwater areas in the Ifni basin, located in the western Anti-Atlas range of Morocco, was conducted based on a multicriteria analytical approach that integrated a set of geomorphological and hydroclimatic factors influencing the availability of this resource. This approach involved the use of geographic information systems (GIS) and hierarchical analytical process (AHP) models. Different factors were classified and weighted according to their contribution to and impact on groundwater reserves. Their normalized weights were evaluated using a pairwise comparison matrix. Four classes of potentiality emerged: very high, high, moderate, and low, occupying 15.22%, 20.17%, 30.96%, and 33.65%, respectively, of the basin’s area. A groundwater potential map (GWPA) was validated by comparison with data from 134 existing water points using a receiver operating characteristic (ROC) curve. The AUC was calculated at 80%, indicating the good predictive accuracy of the AHP method. These results will enable water operators to select favorable sites with a high groundwater potential.

The Sidi Ifni region in southwest Morocco is mainly composed of crystalline rocks with limited groundwater storage capacity. These water resources drain in particular fault zones with high fracture permeability. The main objective of this study is to describe the geological structure of the region to optimize future drilling locations. The gravity data were processed using various techniques, such as total horizontal gradient, tilt derivative, and Euler deconvolution, in conjunction with the interpretation of the geological data, to create a new structural map. This map confirms the presence of many previously identified or inferred faults and identifies significant new faults with their respective trends and depths. Analysis of this map shows that major faults are oriented NNE-SSW and NE-SW, while minor faults are oriented E-W, NW-SE, and NNW-SSE. The superposition of the hydrogeological data and the structural map reveals that the high groundwater flow values in the boreholes are located in the vicinity of the major faults and talwegs. The structures deduced from the filtering and interpretation of the gravity data suggest that the hydrogeological system of the Ifni Inlier is controlled by its structures. To confirm this impact, a high-resolution electrical resistivity map (7200 Hz) was used, with penetration depths ranging from 84 to 187 m. Negative boreholes, located in high resistivity ranges corresponding to sound basement formations without fault crossings, showed high resistivity values. The positive holes, located in anomalies with low linear resistivity, revealed the impact of fault crossings, which drain water and tend to decrease the resistivity values of the formations. Therefore, these new structural maps will assist in planning future hydrogeological studies in this area.