Landslides are prevalent in the Western Ghats, and the incidences that happened in 2021 in the Koottickal area of the Kottayam district (Western Ghats) resulted in the loss of 10 lives. The objectives of this study are to assess the landslide susceptibility of the high-range local self-governments (LSGs) in the Kottayam district using the analytical hierarchy process (AHP) and fuzzy-AHP (F-AHP) models and to compare the performance of existing landslide susceptible maps. This area never witnessed any massive landslides of this dimension, which warrants the necessity of relooking into the existing landslide-susceptible models. For AHP and F-AHP modeling, ten conditioning factors were selected: slope, soil texture, land use/land cover (LULC), geomorphology, road buffer, lithology, and satellite image-derived indices such as the normalized difference road landslide index (NDRLI), the normalized difference water index (NDWI), the normalized burn ratio (NBR), and the soil-adjusted vegetation index (SAVI). The landslide-susceptible zones were categorized into three: low, moderate, and high. The validation of the maps created using the receiver operating characteristic (ROC) technique ascertained the performances of the AHP, F-AHP, and TISSA maps as excellent, with an area under the ROC curve (AUC) value above 0.80, and the NCESS map as acceptable, with an AUC value above 0.70. Though the difference is negligible, the map prepared using the TISSA model has better performance (AUC = 0.889) than the F-AHP (AUC = 0.872), AHP (AUC = 0.867), and NCESS (AUC = 0.789) models. The validation of maps employing other matrices such as accuracy, mean absolute error (MAE), and root mean square error (RMSE) also confirmed that the TISSA model (0.869, 0.226, and 0.122, respectively) has better performance, followed by the F-AHP (0.856, 0.243, and 0.147, respectively), AHP (0.855, 0.249, and 0.159, respectively), and NCESS (0.770, 0.309, and 0.177, respectively) models. The most landslide-inducing factors in this area that were identified through this study are slope, soil texture, LULC, geomorphology, and NDRLI. Koottickal, Poonjar-Thekkekara, Moonnilavu, Thalanad, and Koruthodu are the LSGs that are highly susceptible to landslides. The identification of landslide-susceptible areas using diversified techniques will aid decision-makers in identifying critical infrastructure at risk and alternate routes for emergency evacuation of people to safer terrain during an exigency.

During the last decade, climate change has generated extreme rainfall events triggering flash floods in short periods worldwide. The delimitation of flood zones by detailed mapping generally makes it possible to avoid human and economic losses, especially in regions at high risk of flooding. The Taguenit basin, located in southern Morocco, is a particular case. The mapping of the flood zones of this basin by the method of the Flood Hazard Index (FHI) in a GIS geographic information systems environment was based on the multi-criteria analysis, taking into consideration the seven parameters influencing these extreme phenomena, namely rainfall, slope, flow accumulation, drainage network density, distance from rivers, permeability, and land use. Average annual rainfall data for 37 years (1980 to 2016) was used in this study for floodplain mapping. A weight was calculated for each parameter using the Analytical Hierarchy Process (AHP) method. The combination of the maps of the different parameters made it possible to draw up a final map classified into five risk intervals: very high, high, moderate, lower and very lower presenting, respectively, 8.04%, 20.63%, 31.47%, 15.36%, and 24.50% of the area of the basin. The reliability of this method was tested by a Flood susceptibility analysis. The results generated by the Flood Hazard Index (FHI) model are similar to those of previous historical events. Realistic and applicable solutions have been proposed to minimize the impact of these floods as much as possible.

An assessment of potential groundwater areas in the Ifni basin, located in the western Anti-Atlas range of Morocco, was conducted based on a multicriteria analytical approach that integrated a set of geomorphological and hydroclimatic factors influencing the availability of this resource. This approach involved the use of geographic information systems (GIS) and hierarchical analytical process (AHP) models. Different factors were classified and weighted according to their contribution to and impact on groundwater reserves. Their normalized weights were evaluated using a pairwise comparison matrix. Four classes of potentiality emerged: very high, high, moderate, and low, occupying 15.22%, 20.17%, 30.96%, and 33.65%, respectively, of the basin’s area. A groundwater potential map (GWPA) was validated by comparison with data from 134 existing water points using a receiver operating characteristic (ROC) curve. The AUC was calculated at 80%, indicating the good predictive accuracy of the AHP method. These results will enable water operators to select favorable sites with a high groundwater potential.

Wildfires are one of the gravest and most momentous hazards affecting rich forest biomes worldwide; India is one of the hotspots due to its diverse forest types and human-induced reasons. This research aims to identify wildfire risk zones in two contrasting climate zones, the Wayanad Wildlife Sanctuary in the Western Ghats and the Kedarnath Wildlife Sanctuary in the Himalayas, using geospatial tools, analytical hierarchy process (AHP), and fuzzy-AHP models to assess the impacts of various conditioning factors and compare the efficacy of the two models. Both of the wildlife sanctuaries were severely battered by fires in the past, with more than 100 fire incidences considered for this modeling. This analysis found that both natural and anthropogenic factors are responsible for the fire occurrences in both of the two sanctuaries. The validation of the risk maps, utilizing the receiver operating characteristic (ROC) method, proved that both models have outstanding prediction accuracy for the training and validation datasets, with the F-AHP model having a slight edge over the other model. The results of other statistical validation matrices such as sensitivity, accuracy, and Kappa index also confirmed that F-AHP is better than the AHP model. According to the F-AHP model, about 22.49% of Kedarnath and 17.12% of Wayanad fall within the very-high risk zones. The created models will serve as a tool for implementing effective policies intended to reduce the impact of fires, even in other protected areas with similar forest types, terrain, and climatic conditions.

Ensuring water availability for agriculture and drinking water supply in semi-arid mountainous regions requires control of factors influencing groundwater availability. In most cases, the population draws its water needs from the alluvial aquifers close to villages that are already limited and influenced by current climatic change. In addition, the establishment of deep wells in the hard rock aquifers depletes the aquifer. Hence, understanding the factors influencing water availability is an urgent requirement. The use of geographic information system (GIS), and remote sensing (RS), together with decision-making methods like analytical hierarchy process (AHP) will be of good aid in this regard. In the Tata basin, located in SE Morocco, ten factors were used to explain the groundwater potentiality map (GWPM). Five categories of potential zones were determined: very low (8.67%), low (17.74%), moderate (46.77%), high (19.95%), and very high (6.87%). The efficiency of the AHP model is validated using the ROC curve (receiver operating characteristics) which revealed a good correlation between the high potential groundwater zones and the spatial distribution of high flow wells. Geophysical prospecting, using electrical resistivity profiles, has made it possible to propose new well sites. It corresponds to conductive resistivity zones that coincide with the intersection of hydrogeological lineaments.

Increased sedimentation is the main problem that affects dam efficiency by reducing storage capacity. Planning for dam construction and maintenance requires design strategies that heavily depend on integrated basin models, properly identifying principal sediment origins within the watershed and qualifying the sediment production rate. In this research work, the physically-based watershed SWAT model, defined as the Soil and Water Assessment Tool, was used to estimate the rate of sediment production for future dams in the Tata basin, located in southeast Morocco. The model was calibrated and tested for uncertainty by the employment of the algorithm Sequential Uncertainty Fitting-2. The outputs were used for assessing critical sediment source areas. Calibration and validation of the model were performed by monthly data. The values for Nash–Sutcliffe efficiency coefficient, Percent bias coefficient and determination coefficient (R²), respectively, during the calibration period 1990–1998 (0.96, −13% and 0.96) and the validation period 1999–2006 (0.77, + 11% and 0.93) indicate the accordance with the results obtained for the measured flow and the simulated flow values. The annual sediment yield of the Tata basin extends from 0 to 11 t/ha/y with a mean of 2.3 t/ha/y. The spatial distribution of these sediments varies from upstream to downstream. The downstream basin generated more sediment to the river per unit area, though it was less than the total amount of the basin for the upstream area. This variation is influenced by the increased downstream surface runoff and also by other characteristics of the basin such as slope and lithology. The low erosion places correspond to areas with lithological formations that are more resistant to erosion.