This paper discusses the time-of-arrival (TOA) based indoor visible light communication (VLC) positioning system in a non-line-of-sight environment. The propagation delay is assumed to be gamma distributed. The generalized Cramer–Rao lower bound for multipath propagation is derived as the theoretical accuracy limitation. The performance of the positioning system is affected by the shape parameter and the scale parameter of gamma distribution. The influences on positioning accuracy of multipath effects are analyzed through discussing the physical meaning of the gamma distribution parameters. It is concluded that the lower bound of positioning accuracy is attained when variance of the non-line-of-sight propagation-induced path lengths is zero. The simulation result proves that the theoretical positioning accuracy is in the order of centimeters with the given scenario.
Topological insulators (TIs), as a two-dimensional (2D) material, have been widely used in optoelectronic devices. However, further enhancements of output pulses in ultrafast fiber lasers are limited by some aspects of materials, such as the modulation depth and relaxation time. In order to overcome the limitations of individual materials and improve the optical properties, in this work, a lateral heterostructure (LHS) material based on Sb2Te3–Bi2Te3 is prepared by hydrothermal synthesis. Its nonlinear optical (NLO) performance is measured by a twin-detector setup and femtosecond transient absorption spectrometer, determining that the LHS has a shorter recovery time and the modulation depth is nearly three times that of the other two individual materials. Then this LHS is analyzed via first principle calculation methods and it is found that carrier mobility by analog computation increases two orders of magnitude compared with the individual material Bi2Te3. Finally, this LHS as a saturable absorber (SA) is applied in the Er-doped fiber laser to realize the ultrafast pulse output with the highest repetition rate of 2.29 GHz. These results show that the LHS material has a better NLO performance than the individual material Bi2Te3. This approach that takes advantage of LHS to optimize the performance of materials provides a new direction for the design and application of 2D material in optoelectronic devices.
The beam quality mismatch of laser diode stacks in both axes limits many direct applications for fiber or solid laser pumping and material processing. In this paper, a one-step cutting-rotating beam shaping system has been designed to homogenize the beam quality of two polarization-multiplexing laser diode stacks. Coupling laser diode stacks consisting of eight bars into a standard fiber with a core diameter of 600 μm and an NA of 0.22 is achieved. The simulative result shows that the system will have an output power over 1056 W. By using the technique, the production of compact and high brightness fiber-coupling diode lasers can be directly used for laser cladding and laser surface hardening processes.
This review focuses on the development of tactile sensors for parameters such as pressure, strain and integration of multiple functions. The application prospect of bionic sensors in e-skin, human–computer interaction, and bionic robots is envisioned.