Silicon physical unclonable function (PUF) implemented by static random access memory (SRAM) exists inherent demerit of unstable cells due to noise of environment and circuits, which significantly restricts its reproducibility. In this paper, a 16T SRAM cell with reset-delay circuit and a 2-stage voltage ramp up is fabricated and reported. Compared to conventional SRAM structure, each PUF cell adds a pair of pull-up PMOS (P-channel metal oxide semiconductor) and pull-down NMOS (N-channel metal oxide semiconductor) controlled by reset and delayed-reset signals respectively, resulting in two positive feedback stages with different amplification coefficients when the voltage is ramped up. PUF array consists of 4064 cells, 322 dummy cells and a group of 8 series-connected inverters with an area of 304 μm × 650 μm to match the digital post-processing module. PUF test chip was fabricated in HH-Grace 110 nm platform with total area 1140 × 1140 μm 2 . The average HDintra (intra-chip Hamming distance, also bit error rate, BER) and HDinter (inter-chip Hamming distance) values of the 50 PUF chips in SOP16 package measured at normal point (1.5 V /25°C) were 1.92% and 49.85%, respectively.
Multispectral infrared imaging systems that simultaneously operate in the long-wave infrared (LWIR) and mid-wave infrared (MWIR) bands offer significant advantages for target detection and recognition. However, conventional infrared optical systems rely on bulky multi-element lens assemblies to accommodate incident wavelengths of LWIR and MWIR bands, making it challenging for compact thermal optics design. Here, we propose and experimentally demonstrate an inverse designed infrared metalens capable of simultaneously focusing LWIR and MWIR radiation at wavelengths of 9.5 μm and 4.75 μm with a focal length variation of 1%. In the experiment, the proposed metalens with detector enables a dual-wavelength thermal imaging with a compact size (26 × 26 × 18 mm3) and a light weight (19 g). This work establishes a robust and scalable inverse design strategy for dual-wavelength infrared metalenses and provides a promising route toward compact, integrated, and multifunctional infrared imaging lens.
Long-wave infrared (LWIR) imaging is increasingly required in night vision, compact aerial platforms, and wearable systems, where the demand for lightweight and low-cost optics challenges traditional multi-element refractive lenses. Although metalenses offer strong miniaturization potential, their standalone bandwidth and wide-FOV performance remain constrained. To address these limitations, we propose a target-driven, phase-gradient-aware ring-by-ring optimization for designing an achromatic and coma-corrected LWIR hybrid metalens with an 8.4 mm diameter. The refractive geometry and wavelength-dependent metalens phase compensation is jointly optimized across the 8-12 μm band and a 41.4° full field of view. The resulting hybrid system, with a total track length of only 15.8 mm, delivers diffraction-limited focal spots with very small chromatic focal shifts, well-suppressed off-axis aberrations, and an MTF exceeding 0.37 at 20 lp/mm. Resolution-target imaging further demonstrates substantially clearer feature reproduction than a refractive-only lens. These results establish a viable route toward compact, lightweight, and high-performance LWIR imaging systems.