This paper describes the establishment of free-standing rolled graphene oxide (roll-GO) and polypyrrole (Ppy) using a modified Hummer method and oxidative polymerization. Then, a photodetector was created by removing a thin film of the free-standing rolled graphene oxide from a filter paper and attaching it to a tape. The chemical structure of the roll-GO was confirmed using XRD and FTIR analysis, while SEM and TEM showed that it was rolled in nature. The material had a small bandgap of 2.4 eV and a high current density in light conditions. The photodetector responded well to monochromatic light, with Jph values changing from 0.027 to 0.019 mA/cm2 as the light wavelengths decreased from 340 to 730 nm. The photoresponsivity (R) and detectivity (D) values were high, at 340 nm (0.27 mA/W and 6.0 × 107 Jones, respectively) and at 730 nm (0.19 and 4.25 × 107 Jones, respectively). The addition of Ppy improved these parameters, with the Ppy/roll-GO/tape photoelectrode showing excellent R and D values of 0.33 mA/W and 7.34 × 107 Jones, respectively. Furthermore, the production of a photocurrent at V = 0 indicated that the Ppy/roll-GO layer could be used for solar cell applications. Overall, the results suggest that the prepared free-standing Ppy/roll-GO/tape photodetector has high potential for use in the optical region between 340 and 730 nm and may be suitable for industrial applications.
The controlled-release characteristic of drug delivery systems is utilized to increase the residence time of therapeutic agents in the human body. This study aimed to formulate and characterize salsalate (SSL)-loaded chitosan nanoparticles (CSNPs) prepared using the ionic gelation method and to assess their in vitro release and antibacterial and antibiofilm activities. The optimized CSNPs and CSNP–SSL formulation were characterized for particle size (156.4 ± 12.7 nm and 132.8 ± 17.4 nm), polydispersity index (0.489 ± 0.011 and 0.236 ± 132 0.021), zeta potential (68 ± 16 mV and 37 ± 11 mV), and entrapment efficiency (68.9 ± 2.14%). Physicochemical features of these nanoparticles were characterized using UV–visible and Fourier transform infrared spectroscopy and X-ray diffraction pattern. Scanning electron microscopy studies indicated that CSNPs and CSNP–SSL were spherical in shape with a smooth surface and their particle size ranged between 200 and 500 nm. In vitro release profiles of the optimized formulations showed an initial burst followed by slow and sustained drug release after 18 h (64.2 ± 3.2%) and 48 h (84.6 ± 4.23%), respectively. Additionally, the CSNPs and CSNP–SSL nanoparticles showed a sustained antibacterial action against Staphylococcus aureus (15.7 ± 0.1 and 19.1 ± 1.2 mm) and Escherichia coli (17.5 ± 0.8 and 21.6 ± 1.7 243 mm). Interestingly, CSNP–SSL showed better capability (89.4 ± 1.2% and 95.8 ± 0.7%) than did CSNPs in inhibiting antibiofilm production by Enterobacter tabaci (E2) and Klebsiella quasipneumoniae (SC3). Therefore, CSNPs are a promising dosage form for sustained drug delivery and enhanced antibacterial and antibiofilm activity of SSL; these results could be translated into increased patient compliance.
A graphene oxide (GO)/poly 3-methyl aniline (P3MA) photodetector has been developed for light detection in a broad optical region: UV, Vis, and IR. The 3-methyl aniline was initially synthesized via radical polymerization using an acid medium, i.e., K2S2O8 oxidant. Consequently, the GO/P3MA composite was obtained through the adsorption of GO into the surface of P3MA. The chemical structure and optical properties of the prepared materials have been illustrated via XRD, FTIR, SEM, and TEM analysis. The absorbance measurements demonstrate good optical properties in the UV, Vis, and near-IR regions, although a decrease in the bandgap from 2.4 to 1.6 eV after the composite formation was located. The current density (Jph) varies between 0.29 and 0.68 mA·cm−2 (at 2.0 V) under dark and light, respectively. The photodetector has been tested using on/off chopped light at a low potential, in which the produced Jph values decrease from 0.14 to 0.04 µA·cm−2, respectively. The GO/P3MA photodetector exhibits excellent R (and D) values of 4 and 2.7 mA·W−1 (0.90 × 109 and 0.60 × 109 Jones) in the UV (340 nm) and IR (730 nm) regions, respectively. The R and D values obtained here make the prepared photodetector a promising candidate for future light detection instruments.
A fractal, flower petal-like CuS-CuO/G-C3N4 nanocomposite is prepared and applied in a symmetric two-electrode supercapacitor. The preparation of CuS-CuO/G-C3N4 is carried out through the hydrothermal method, in which salts of copper are dissolved and mixed with a suspension of G-C3N4 nanoparticles. A symmetric two-electrode supercapacitor, formed from CuS-CuO/G-C3N4 paste on Au-plates is investigated. The measurements are carried out in diluted 0.5 M HCl, and Whatman filter paper is used as a separator. The supercapacitor electric properties are determined by measuring the charge/discharge, cyclic voltammetry, impedance, and lifetime parameters. An enhancement in the charge/discharge time from 65 to 420 s was recorded while decreasing the current density (J) from 1.0 to 0.3 A/g. The cyclic voltammetry behavior is studied from 50 to 300 mV·s−1, causing a direct increase in the produced J values. The specific capacitance (CS) and energy density (E) values are 370 F/g and 37 W·h·kg−1, respectively. The magnificent properties of the prepared supercapacitor qualify it for industrial applications as an alternative to batteries.
Rolled graphene oxide (roll-GO) with anew morphological properties than normal graphene is synthesized using modified Hummer. Then, the roll-GO/PANI composite is prepared through the adsorption of roll-GO on the surface of the PANI film, that performed through the oxidative polymerization method. The developed composite displays a small bandgap of 1.9 eV and shows a high optical property extends through a wide optical region from UV to IR regions. The chemical structure and function groups are confirmed using the XRD and FTIR. The roll-GO/PANI composite was investigated as a photodetector. The effects of different irradiation light conditions and the monochromatic wavelengths were tested through the measurements of the produced current density, Jph. The optical photon response exhibited excellent light sensitivity of the photodetector. The Jph enhanced highly under light (0.34 mA·cm−2) compared to dark conditions (0.007 mA·cm−2). Jph reached 0.24, 0.23, 0.14, and 0.09 mA·cm−2 under 340, 440, 540, and 730 nm, respectively. The photodetector detectivity (D) and photoresponsivity (R) are found to equal 0.45 × 109 Jones and 2.25 mA·W−1, respectively.
Main problems of the large polaron theory are considered. We demonstrate that the problem of searching the ground stationary state of a system of coupled fields with translation-invariant Hamiltonian can have a solution of the form , , i.e., the solution with the spontaneously broken translational symmetry. Such a state can be a ground state of a large polaron in case of strong electron-phonon coupling when the spontaneous break of the translational symmetry results from the phonon vacuum deformation by the electric field of the charge carrier. The correctness of the classical representation of the polarization field in the theory of a strongly coupled large polaron is proved on the base of the theory of the quantum-coherent states of the phonon field. The use of this representation has enabled us to show that extremely high losses of the electron energy in dielectric parts of cold cathodes occurring when the carrier velocity is lower than the threshold for the single-phonon radiation are due to coherent phonon radiation by polarons like Cherenkov effect. It is this radiation that results in the predicted Thornber and Feynman dependence of the carrier steady-state velocity on the applied electric field strength. The coherent phonon radiation generated by polaron current can be detected in experiments on the neutrons scattering. The primary directions of the neutrons scattering depend on the polarons steady-state velocity and, hence, on the applied field strength. The coherent phonon radiation stemming from supersonic thermal motion of polarons causes a giant increase of the resistance in a corresponding temperature interval.