Tanee Demeechai

Dr. Tanee Demeechai


Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 April 2021 in IEEE Access
Verified
Journal Article
Open access
SSShashi Shah
Shashi Shah
KCKrit Chaiwong
Krit Chaiwong
LKLa-Or Kovavisaruch
La-Or Kovavisaruch
KKKamol Kaemarungsi
Kamol Kaemarungsi
TDTanee Demeechai
Tanee Demeechai
Impulse-radio ultra-wideband (IR-UWB) networks are gaining wide acceptance in short-to-medium range wireless sensing and positioning applications that require high accuracy. It is achieved generally via signal message exchange between ultra-wideband (UWB) transceiver nodes, where the signal propagating through their analog circuitry suffers transmitting and receiving antenna delays. Such delays, unless measured and properly corrected for, may induce an error in range estimation between UWB nodes and eventually affect the accuracy of real-time location systems (RTLSs) based on the IR-UWB. This paper presents a system to measure the antenna delays of UWB nodes. It provides comprehensive mathematical modeling, design, and implementation of the proposed antenna delay measurement system. Experimental evaluation in a line-of-sight (LOS) environment shows its effectiveness for maintaining the accuracy of the range measurement between UWB nodes by taking into consideration the antenna delays measured by the proposed system.

23 April 2013 in Journal of Neural Engineering
Verified
Journal Article
Closed access
CPChantri Polprasert
Chantri Polprasert
PKPratana Kukieattikool
Pratana Kukieattikool
TDTanee Demeechai
Tanee Demeechai
JRJames A Ritcey
James A Ritcey
SSSiwaruk Siwamogsatham
Siwaruk Siwamogsatham
We propose a new stimulation pattern design for the P300-based matrix speller aimed at increasing the minimum target-to-target interval (TTI). Inspired by the simplicity and strong performance of the conventional row-column (RC) stimulation, the proposed stimulation is obtained by modifying the RC stimulation through alternating row and column flashes which are selected based on the proposed design rules. The second flash of the double-flash components is then delayed for a number of flashing instants to increase the minimum TTI. The trade-off inherited in this approach is the reduced randomness within the stimulation pattern. We test the proposed stimulation pattern and compare its performance in terms of selection accuracy, raw and practical bit rates with the conventional RC flashing paradigm over several flash rates. By increasing the minimum TTI within the stimulation sequence, the proposed stimulation has more event-related potentials that can be identified compared to that of the conventional RC stimulations, as the flash rate increases. This leads to significant performance improvement in terms of the letter selection accuracy, the raw and practical bit rates over the conventional RC stimulation. These studies demonstrate that significant performance improvement over the RC stimulation is obtained without additional testing or training samples to compensate for low P300 amplitude at high flash rate. We show that our proposed stimulation is more robust to reduced signal strength due to the increased flash rate than the RC stimulation.

9 December 2019 in Sensors
Verified
Journal Article
Open access
PDF file
SSShashi Shah
Shashi Shah
TDTanee Demeechai
Tanee Demeechai
Growth in the applications of wireless devices and the need for seamless solutions to location-based services has motivated extensive research efforts to address wireless indoor localization networks. Existing works provide range-based localization using ultra-wideband technology, focusing on reducing the inaccuracy in range estimation due to clock offsets between different devices. This is generally achieved via signal message exchange between devices, which can lead to network congestion when the number of users is large. To address the problem of range estimation with limited signal messages, this paper proposes multiple simultaneous ranging methods based on a property of time difference of reception of two packets transmitted from different sources in impulse-radio ultra-wideband (IR-UWB) networks. The proposed method maintains similar robustness to the clock offsets while significantly reducing the air time occupancy when compared with the best existing ranging methods. Experimental evaluation of ranging in a line-of-sight environment shows that the proposed method enables accurate ranging with minimal air time occupancy.

23 January 2022 in Sensors
Verified
Journal Article
Open access
PDF file
SSShashi Shah
Shashi Shah
LKLa-Or Kovavisaruch
La-Or Kovavisaruch
KKKamol Kaemarungsi
Kamol Kaemarungsi
TDTanee Demeechai
Tanee Demeechai
Ultra-wideband (UWB) networks are gaining wide acceptance in short- to medium-range wireless sensing and positioning applications in indoor environments due to their capability of providing high-ranging accuracy. However, the performance is highly related to the accuracy of measured position and antenna delay of anchor nodes, which form a reference positioning system of fixed infrastructure nodes. Usually, the position and antenna delay of the anchor nodes are measured separately as a standard initial procedure. Such separate measurement procedures require relatively more time and manual interventions. This paper presents a system that simultaneously measures the position and antenna delay of the anchor nodes. It provides comprehensive mathematical modeling, design, and implementation of the proposed system. An experimental evaluation in a line-of-sight (LOS) environment shows the effectiveness of the anchor nodes, whose position and antenna delay values are measured by the proposed system, in localizing a mobile node.

10 June 2016 in EURASIP Journal on Wireless Communications and Networking
Verified
Journal Article
Open access
PDF file
TDTanee Demeechai
Tanee Demeechai
PKPratana Kukieattikool
Pratana Kukieattikool
TNThang Ngo
Thang Ngo
TCTae Gyu Chang
Tae Gyu Chang
An indoor localization method using multiple input, multiple output orthogonal frequency division multiplexing (MIMO-OFDM) channel state information (CSI) is proposed as a method that can be implemented on wireless local area networks of a current standard without affecting their protocol structures and that does not require a training process for adaptation to indoor environments. In the proposed method, the CSI obtained by the MIMO-OFDM receivers of all access points upon successful reception of a data packet from a mobile terminal (MT) is processed in order to determine the location of the MT. The proposed method analyzes the multipath effect that appears in the CSI as multiple complex sinusoids by using the matrix pencil method in order to extract only terms that are contributed by direct paths from the MT to the access points. Localization is achieved using the direct-path terms on the basis of the maximum likelihood principle.

26 September 2012 in IEEE Communications Letters
Verified
Journal Article
Closed access
TDTanee Demeechai
Tanee Demeechai
TCTae-Gyu Chang
Tae-Gyu Chang
SSSiwaruk Siwamogsatham
Siwaruk Siwamogsatham
A frequency-domain algorithm for OFDM-timing estimation is considered useful when the OFDM system is to operate in a known narrowband interference channel, e.g., in a cognitive radio OFDM-based overlay system. We generalize a recently proposed frequency-domain algorithm for OFDM-timing estimation and then analyze the performance of the algorithm. The algorithm is based on a complex timing metric that has the mean of which the angle depends in an affine manner on the time offset. By computing the mean of the metric and the mean square of the metric component orthogonal to the mean, from the power-delay profile and noise condition of the channel, the channel-induced bias of the estimator is quantified and the root-mean-square of the estimation error is estimated. The discrepancy between analysis and simulation results on the root-mean-square error is less than one nominal sampling interval for a useful range of operating conditions.