Impulse-radio ultra-wideband (IR-UWB) networks are gaining wide acceptance in short-to-medium range wireless sensing and positioning applications that require high accuracy. It is achieved generally via signal message exchange between ultra-wideband (UWB) transceiver nodes, where the signal propagating through their analog circuitry suffers transmitting and receiving antenna delays. Such delays, unless measured and properly corrected for, may induce an error in range estimation between UWB nodes and eventually affect the accuracy of real-time location systems (RTLSs) based on the IR-UWB. This paper presents a system to measure the antenna delays of UWB nodes. It provides comprehensive mathematical modeling, design, and implementation of the proposed antenna delay measurement system. Experimental evaluation in a line-of-sight (LOS) environment shows its effectiveness for maintaining the accuracy of the range measurement between UWB nodes by taking into consideration the antenna delays measured by the proposed system.
This paper presents the implementation of a synchronous Structural Health Monitoring (SHM) framework utilizing wireless, low-cost, and off-the-shelf components. Vibration-based condition monitoring plays a crucial role in assessing the reliability of structural systems by detecting damage through changes in vibration parameters. The adoption of low-cost Micro-Electro-Mechanical Systems (MEMS) sensors in Wireless Sensor Networks (WSNs) has gained traction, emphasizing the need for precise time synchronization to schedule wake-up times of multiple sensor nodes for data collection. To address this challenge, our proposed method introduces a TCP/IP socket programming-based mimic broadcasting mechanism and a scalable sensing network controlled by a central gateway, leveraging the Raspberry Pi Python platform. The system operates using Internet of Things (IoT) concepts and adopts a star topology, where a packet is transmitted from the gateway to initiate measurements simultaneously on multiple sensor nodes. The sensor node comprises a MEMS accelerometer, a real time clock DS3231 module and Raspberry Pi Zero 2W (RPi0-2W), while the gateway employs a Raspberry Pi 4 (RPi4). To ensure accurate time synchronization, all Pi0-2W nodes were configured as Network Time Protocol (NTP) clients, synchronizing with an RPi4 server using chrony, the reliable implementation of the NTP. Through experimental evaluations, the system demonstrates its effectiveness and reliability in achieving initial time synchronization. This study addresses the challenge of achieving precise time alignment between sensor nodes through the utilization of the Dynamic Time Wrapping (DTW) method for Frequency Domain Decomposition (FDD) applications. The contribution of this research significantly enhances the field by improving the accuracy and reliability of time-aligned measurements, with a specific focus on utilizing low-cost sensors. By developing a practical and cost-effective SHM framework, this work advances the accessibility and scalability of structural health monitoring solutions, facilitating more widespread adoption and implementation in various engineering applications
This paper proposes the implementation of and experimentation with GPR for real-time automatic detection of buried IEDs. GPR, consisting of hardware and software, was implemented. A UWB antenna was designed and implemented, particularly for the operation of the GPR. The experiments were conducted in order to demonstrate the real-time automatic detection of buried IEDs using GPR with an R-CNN algorithm. In the experiments, the GPR was mounted on a pickup truck and a maintenance train in order to find the IEDs buried under a road and a railway, respectively. B-scan images were collected using the implemented GPR. R-CNN-based detection for the hyperbolic pattern, which indicates the buried IED, was performed along with pre-processing, for example, using zero offset removal, and background removal and filtering. Experimental results in terms of detecting the hyperbolic pattern in B-scan images were shown and verified that the proposed GPR system is superior to the conventional one using region analysis processing-based detection. Results also showed that pre-processing is required in order to improve and/or clean the hyperbolic pattern before detection. The GPR can automatically detect IEDs buried under roads and railways in real time by detecting the hyperbolic pattern appearing in the collected B-scan image.
Most existing wireless indoor positioning systems have only success performance requirements in normal operating situations whereby all wireless equipment works properly. There remains a lack of system reliability that can support emergency situations when there are some reference node failures, such as in earthquake and fire scenarios. Additionally, most systems do not incorporate environmental information such as temperature and relative humidity level into the process of determining the location of objects inside the building. To address these gaps, we propose a novel integrated framework for wireless indoor positioning systems based on a location fingerprinting technique which is called the Robust and low Complexity indoor positioning systems framework (RoC framework). Our proposed integrated framework consists of two essential indoor positioning processes: the system design process and the localization process. The RoC framework aims to achieve robustness in the system design structure and reliability of the target location during the online estimation phase either under a normal situation or when some reference nodes (RNs) have failed. The availability of low-cost temperature and relative humidity sensors can provide additional information for the location fingerprinting technique and thereby reduce location estimation complexity by including this additional information. Experimental results and comparative performance evaluation revealed that the RoC framework can achieve robustness in terms of the system design structure, whereby it was able to provide the highest positioning performance in either fault-free or RN-failure scenarios. Moreover, in the online estimation phase, the proposed framework can provide the highest reliability of the target location under the RN-failure scenarios and also yields the lowest computational complexity in online searching compared to other techniques. Specifically, when compared to the traditional weighted k-nearest neighbor techniques (WKNN) under the 30% RN-failure scenario at Building B, the proposed RoC framework shows 74.1% better accuracy performance and yields 55.1% lower computational time than the WKNN.
The systematic design of wireless indoor positioning systems can offer another essential approach to achieving the required performance objectives aside from using suitable location determination algorithms. This manuscript investigates Bluetooth Low Energy- (BLE-) based wireless indoor positioning systems and how adjusting the system design parameters can affect their location determination performance. Without placing emphasis on sophisticated location determination algorithms, this work provides guidelines for how a system designer can control the balance among multiple positioning performance metrics. For example, a balance between the number of installed reference nodes and the accuracy performance can be chosen to control deployment costs, such as the installation expense, infrastructure expense, and installation time. To demonstrate our baseline study, we compare three different designs of BLE wireless indoor positioning system that utilize location determination algorithms based on proximity, trilateration, and scene analysis. These designs are also compared over two different building sizes, which are medium and large. The design model and performance analysis data were based on our actual implementation of the hardware and software system for a BLE wireless indoor positioning system. Specifically, the received signal strength indication data were collected from our prototype reference nodes. The findings from our study indicated that a proximity-based system can only provide fair location accuracy performance (average error distance of 5 m to 7 m) making it unsuitable for applications that require high accuracy. For medium location accuracy performance (average error distance of 3 m to 5 m), the trilateration-based system can achieve the highest efficiency in terms of number of installed reference nodes over the accuracy. The trilateration-based system can reduce the number of installed reference nodes by 154% to achieve the same level of accuracy as the scene analysis-based system. For good location accuracy performance (average error distance ≤ 3 m), the scene analysis-based system yields the highest scalability performance in terms of installed reference nodes. The scene analysis-based system can reduce the number of reference nodes by 40% and 113% to achieve the same accuracy performance when compared with trilateration and proximity-based systems, respectively. Finally, the validation results from the actual installation of Bluetooth-based indoor positioning systems confirmed that our proposed framework can help the system designers to achieve the required performance goal.
Ultra-wideband (UWB) networks are gaining wide acceptance in short- to medium-range wireless sensing and positioning applications in indoor environments due to their capability of providing high-ranging accuracy. However, the performance is highly related to the accuracy of measured position and antenna delay of anchor nodes, which form a reference positioning system of fixed infrastructure nodes. Usually, the position and antenna delay of the anchor nodes are measured separately as a standard initial procedure. Such separate measurement procedures require relatively more time and manual interventions. This paper presents a system that simultaneously measures the position and antenna delay of the anchor nodes. It provides comprehensive mathematical modeling, design, and implementation of the proposed system. An experimental evaluation in a line-of-sight (LOS) environment shows the effectiveness of the anchor nodes, whose position and antenna delay values are measured by the proposed system, in localizing a mobile node.