Zeolites belong to aluminosilicate microporous solids, with strong and diverse catalytic activity, which makes them applicable in almost every kind of industrial process, particularly thanks to their eco-friendly profile. Another crucial characteristic of zeolites is their tremendous adsorption capability. Therefore, it is self-evident that the widespread use of zeolites is in environmental protection, based primarily on the adsorption capacity of substances potentially harmful to the environment, such as pharmaceuticals, pesticides, or other industry pollutants. On the other hand, zeolites are also recognized as drug delivery systems (DDS) carriers for numerous pharmacologically active agents. The enhanced bioactive ability of DDS zeolite as a drug carrying nanoplatform is confirmed, making this system more specific and efficient, compared to the drug itself. These two applications of zeolite, in fact, illustrate the importance of (ir)reversibility of the adsorption process. This review gives deep insight into the balance and dynamics that are established during that process, i.e., the interaction between zeolites and pharmaceuticals, helping scientists to expand their knowledge necessarily for a more effective application of the adsorption phenomenon of zeolites.

This review sheds some light on the emerging niche of the reuse of spent adsorbents in electrochemical devices. Reuse and repurposing extend the adsorbent’s life cycle, remove the need for long-term storage, and generate additional value, making it a highly eco-friendly process. Main adsorbent-type materials are overviewed, emphasising desired properties for initial adsorption and subsequent conversion to electroactive material step. The effects of the most frequent regeneration procedures are compared to highlight their strengths and shortcomings. The latest efforts of repurposing and reuse in supercapacitors, fuel cells, and batteries are analysed. Reuse in supercapacitors is dominated by materials that, after a regeneration step, lead to materials with high surface area and good pore structure and is mainly based on the conversion of organic adsorbents to some form of conductive carbon adlayer. Additionally, metal/metal-oxide and layered-double hydroxides are also being developed, but predominantly towards fuel cell and battery electrodes with respectable oxygen reduction characteristics and significant capacities, respectively. Repurposed adsorbents are being adopted for peroxide generation as well as direct methanol fuel cells. The work puts forward electrochemical devices as a valuable avenue for spent adsorbents and as a puzzle piece towards a greener and more sustainable future.

Acridine and its derivatives (9-chloroacridine and 9-aminoacridine) are investigated here, supported on FAU type zeolite Y, as a delivery system of anticancer agents. FTIR/Raman spectroscopy and electron microscopy revealed successful drug loading on the zeolite surface, while spectrofluorimetry was employed for drug quantification. The effects of the tested compounds on cell viability were evaluated using in vitro methylthiazol-tetrazolium (MTT) colorimetric technique against human colorectal carcinoma (cell line HCT-116) and MRC-5 fibroblasts. Zeolite structure remained unchanged during homogeneous drug impregnation with achieved drug loadings in the 18–21 mg/g range. The highest drug release, in the µM concentration range, with favourable kinetics was established for zeolite-supported 9-aminoacridine. The acridine delivery via zeolite carrier is viewed in terms of solvation energy and zeolite adsorption sites. The cytotoxic effect of supported acridines on HCT-116 cells reveals that the zeolite carrier improves toxicity, while the highest efficiency is displayed by zeolite-impregnated 9-aminoacridine. The 9-aminoacridine delivery via zeolite carrier favours healthy tissue preservation while accompanying increased toxicity toward cancer cells. Cytotoxicity results are well correlated with theoretical modelling and release study, providing promising results for applicative purposes.

Titanium suboxide (TSO) catalysts offer remarkable activity toward pollutant degradation due to their stability at positive potentials, which enables the formation of reactive oxygen species. Herein, TSOs are prepared directly on the surface of Ti mesh, which also serves as the current collector. The evolution of different TSO surface species during temperature treatment is monitored using micro-Raman spectroscopy. The electrochemically active surface area is determined using cyclic voltammetry (CV) and shows a decrease from 9.3 cm² to 1.1 cm² upon increasing temperature, corresponding to the transformation of TSO as seen in micro-Raman spectroscopy. Impedance spectroscopy revealed nearly identical values (≈29 Ohm) for the charge transfer resistance during OER, indicating the presence of the same active centers on the surface. The electrode potential window toward water splitting is examined using oxygen and hydrogen evolution reactions (OER and HER). The Tafel slopes are in the range 400–600 mV dec⁻¹ for OER and 340–440 mV dec⁻¹ for HER, with higher values being desirable in pollutant degradation applications. Onset potential shifted to slightly more negative values with increasing temperature treatment, with samples treated at 850 °C and 950 °C enabling almost tenfold higher currents at the same potential values. The hydrogen evolution potential lies within the optimal region for H* radical formation around −1.2 V vs. RHE. Surface-formed TSOs represent promising biofunctional materials for pollutant degradation.

This review summarizes the recent developments in titanium suboxide (TSO) doping and the application of doped materials in pollutant degradation and electrochemistry. Doping is mainly limited to transition and rare-earth metals, with some exceptions, of similar ionic radii and charge, that can replace Ti ions in TSO without too much disturbance to the lattice. Consequently, doping is limited to below 10 at%, which predominantly induces oxygen vacancy formation. Doping mechanisms are weighted, and their effect on conductivity, stability, and catalytic activity is overviewed. High-temperature H₂ reduction of TiO₂ is still the dominant preparation method, with carbothermal reduction and Ti reduction gaining ground due to safety and energy concerns. Doping predominantly increases the conductivity 2–5 times, while the stability can be both improved or worsened, depending on the size and charge of the doping ion. Electrochemical oxidation, at positive overpotentials, of per- and polyfluoroalkyl substances (PFAS), antibiotics, and other water pollutants, is the main avenue of application. Doping almost exclusively leads to complete selected pollutant degradation and improvement of the pristine TSO, which is summarized in detail. New niche applications of peroxide, hydrogen, and chlorine production are also viable on doped TSO and are touched upon. Complementing experimental results are theoretical calculations, and we give an overview of density functional theory (DFT) results of transition metal-doped TSOs, identifying active centers, degradation trends, and potential new doping candidates.

A cobalt-containing zeolitic imidazolate framework (ZIF-67) was carbonized by different routes to composite materials (cZIFs) composed of metallic Co, Co₃O₄, and N-doped carbonaceous phase. The effect of the carbonization procedure on the water pollutant removal properties of cZIFs was studied. Higher temperature and prolonged thermal treatment resulted in more uniform particle size distribution (as determined by nanoparticle tracking analysis, NTA) and surface charge lowering (as determined by zeta potential measurements). Surface-governed environmental applications of prepared cZIFs were tested using physical (adsorption) and electrochemical methods for dye degradation. Targeted dyes were methylene blue (MB) and methyl orange (MO), chosen as model compounds to establish the specificity of selected remediation procedures. Electrodegradation was initiated via an intermediate reactive oxygen species formed during oxygen reduction reaction (ORR) on cZIFs serving as electrocatalysts. The adsorption test showed relatively uniform adsorption sites at the surface of cZIFs, reaching a removal of over 70 mg/g for both dyes while governed by pseudo-first-order kinetics favored by higher mesoporosity. In the electro-assisted degradation process, cZIF samples demonstrated impressive efficiency, achieving almost complete degradation of MB and MO within 4.5 h. Detailed analysis of energy consumption in the degradation process enabled the calculation of the current conversion efficiency index and the amount of charge associated with O₂^•−/^•OH generation, normalized by the quantity of removed dye, for tested materials. Here, the proposed method will assist similar research studies on the removal of organic water pollutants to discriminate among electrode materials and procedures based on energy efficiency.