The development of new flexible and lightweight electronics has increased the demand for compatible energy storage devices to power them. Carbon nanotube (CNT) fibers have long been known for their ability to be assembled into yarns, offering their integration into electronic devices. They are hindered, however, by their low intrinsic energy storage properties. Herein, we report a novel composite yarn, synthesized through solvothermal processes, that attained energy densities in the range between 0.17 µWh/cm² and 3.06 µWh/cm², and power densities between 0.26 mW/cm² and 0.97 mW/cm², when assembled in a supercapacitor with a PVDF-EMIMBF4 electrolyte. The created unique composition of iron oxalate + iron hydroxide + CNT as an anode worked well in synergy with the much-studied PANI + CNT cathode, resulting in a highly stable yarn energy storage device that maintained 96.76% of its energy density after 4000 cycles. This device showed no observable change in performance under stress/bend tests which makes it a viable candidate for powering wearable electronics.

Flexible and wearable electronic devices are of a high academic and industrial interest. In order to power these devices, there is a need for compatible energy storage units that can exhibit similar mechanical flexibility. Fiber-based devices have thus become increasingly popular since their light-weight, and flexible structure can be easily integrated into textiles. Supercapacitors have garnered a lot of attention due to their excellent cycling durability, fast charge times and superior power density. The primary challenge, however, with electric double layer capacitors (EDLCs), which are part of the supercapacitor family, is that their energy densities are significantly lower compared to those of batteries. Pseudocapacitors, on the other hand, can be designed and created with large energy densities and other outstanding properties typical for supercapacitors. This chapter discusses the fabrication and testing of supercapacitors based on carbon nanotube-polyaniline (PANI) composite fibers. These flexible and light-weight devices are assembled using different electrolytes for comparison. The created in this work PANI-CNT composite devices attain an energy density of 6.16 Wh/kg at a power density of 630 W/kg and retained a capacitance of 88% over 1000 charge-discharge cycles.

With the introduction of flexible and wearable electronic technologies such as displays, antenna’s, etc., there has been an increased need for integrable, easily scalable, and safe electric power sources. Advances in flexible lithium-ion batteries have been recently reported, however they may still suffer from potential thermal runaways. In this chapter we review the progress in the topic of wearable energy storage devices. These devices have taken the form of both sheets and fibers entirely made of active material. We also discuss the advantages and drawbacks of each forms. Finally, we present our own work revealing a simplistic way to integrate working carbon electrode materials into suitable textile and to functionalize the obtained flexible structure with ionic liquid thus creating fabric supercapacitors. These devices can then be connected easily in series (9 V) or in parallel (high current), depending on the current or voltage requirements. The area of the electrodes can also be tuned to sustain higher capacitances. We report an energy density of 48 Wh/kg for a functional device at 3 V working window, which reveals no losses in energy density after 10,000 bending cycles.

Fiber-shaped batteries have attracted much interest in the last few years. However, a major challenge for this type of battery is their relatively low energy density. Here, we present a freestanding, flexible CNT fiber with high electrical conductivity and applied oxygen plasma-functionalization, which was successfully employed to serve as an effective cathode for Li-S batteries. The electrochemical results obtained from the conducted battery tests showed a decent rate capability and cyclic stability. The cathode delivered a capacity of 1019 mAh g⁻¹ at 0.1 C. It accommodated a high sulfur loading of 73% and maintained 47% of the initial capacity after 300 cycles. The demonstrated performance of the fiber cathode provides new insights for the designing and fabrication of high energy density fiber-shaped batteries.