Single atom catalysts (SACs) are a hot research area recently. Over most of the SACs, the singly dispersed atoms are the active sites, which contribute to the catalytic activities significantly compared with a catalyst with continuously packed active sites. It is essential to determine whether SACs have been successfully synthesized. Several techniques have been applied for the characterization of the dispersion states of the active sites over SACs, such as Energy Dispersive X-ray spectroscopy (EDX), Electron Energy Loss Spectroscopy (EELS), etc. In this review, the techniques for the identification of the singly dispersed sites over SACs are introduced, the advantages and limitations of each technique are pointed out, and the future research directions have been discussed. It is hoped that this review will be helpful for a more comprehensive understanding of the characterization and detection methods involved in SACs, and stimulate and promote the further development of this emerging research field.
CO2reforming of CH4(CRM) is not only beneficial to environmental protection, but also valuable for industrial application. Different CeO2supports were prepared to investigate the matching between Ni and CeO2over Ni/CeO2and its effect on CRM. The physicochemical properties of Ni/CeO2-C (commercial CeO2), Ni/CeO2-H (hydrothermal method) as well as Ni/CeO2-P (precipitation method) were characterized by XRD, N2adsorption at − 196 °C, TEM, SEM–EDS, H2-TPR, NH3-TPD and XPS. Ni0with good dispersion and CeO2with more oxygen vacancies were obtained on Ni/CeO2-H, proving the influence on Ni/CeO2catalysts caused by the preparation methods of CeO2. The initial conversion of both CO2and CH4of Ni/CeO2-H was more than five times that of Ni/CeO2-P and Ni/CeO2-C. The better matching between Ni and CeO2on Ni/CeO2-H was the reason for its best catalytic performance in comparison with the Ni/CeO2-C and Ni/CeO2-P samples.
H2 is one of the promising renewable energy sources, but its production and transportation remain challenging. Distributed H2 production using liquid H2 carriers is one of the ideal ways of H2 utilization. Among common H2 carriers, ethanol is promising as it has high H2 content and can be derived from renewable bio-energy sources such as sucrose, starch compounds, and cellulosic biomass. To generate H2 from ethanol, steam reforming of ethanol (SRE) is the most common way, while appropriate catalysts, usually supported metal catalysts, are indispensable. However, the SRE process is quite complicated and always accompanied by various undesirable by-products, causing low H2 yield. Moreover, the catalysts for SRE are easy to deactivate due to sintering and carbon deposition under high reaction temperatures. In recent years, lots of efforts have been made to reveal SRE mechanisms and synthesize catalysts with high H2 yield and excellent stability. Both active metals and supports play an important role in the reaction. This mini-review summarizes the recent progress of SRE catalysts from the view of the impacts of active metals and supports and draws an outlook for future research directions.
Hydrogenation reactions are an important process in today's chemical industry. Typically, hydrogenation reactions involve the removal of an unsaturated bond in olefins or other polyenes via thermal catalysis using hydrogen. As hydrogenation reactions are often carried out at temperatures up to several hundred degrees, they require significant energy input which typically comes from burning fossil fuels. In order to conserve fossil fuels and reduce CO2 emissions, researchers are now developing photothermal catalysts for hydrogenation reactions, which harness concentrated sunlight to achieve the required reaction temperatures or introduce sunlight into thermal-driven reaction systems to reduce the reaction temperatures. Photothermal catalysts thus need to be able to efficiently absorb sunlight, whilst also being able to drive the desired hydrogenation reaction with high activity and selectivity. In this review, we summarize recent research aimed at the development of photothermal catalysts for CO2/CO hydrogenation and alkene/alkyne/aromatic hydrogenation. Particular emphasis is placed on uncovering the reaction mechanisms at the molecular level, which in turn guides the rational design of photothermal catalysts with better performance.