Max Feinauer

Mr. Max Feinauer

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 April 2023 in Journal of Power Sources
Verified
Journal Article
Open access
MFMax Feinauer
Max Feinauer
AAAbdelaziz A. Abd-El-Latif
Abdelaziz A. Abd-El-Latif
PSPeter Sichler
Peter Sichler
ARAislim Aracil Regalado
Aislim Aracil Regalado
MWMargret Wohlfahrt-Mehrens
Margret Wohlfahrt-Mehrens
TWThomas Waldmann
Thomas Waldmann

1 March 2025 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
GGGabriela G. Gerosa
Gabriela G. Gerosa
MFMax Feinauer
Max Feinauer
CHChristin Hogrefe
Christin Hogrefe
SHSamuel Häfele
Samuel Häfele
KBKatharina Bischof
Katharina Bischof
TWThomas Waldmann
Thomas Waldmann
Extending the lifetime of lithium-ion batteries is essential to maximize resource efficiency and minimize environmental impact. Therefore, understanding the aging mechanisms that batteries undergo in their first life is critical to ensure safe operation in second-life applications. This study focuses on a comprehensive safety assessment of commercial 18650-type lithium-ion batteries with graphite||NCA chemistry. The safety of aged cells with the aging mechanism of lithium plating was tested using thermal (ARC), electrical (overcurrent, overcharge, overdischarge), and mechanical (nail penetration) abuse tests. New cells without lithium plating serve as control samples for comparison of the different safety test types and for the cells with lithium plating. The presence and absence of lithium plating is confirmed by electrochemical tests and Post-Mortem analyses (SEM, GD-OES). The cells with lithium plating exhibit significantly lower onset of self-heating temperatures, a tendency to higher maximum thermal runaway temperatures and increased EUCAR hazard levels. The results highlight potential hazards associated with lithium plating in lithium-ion batteries and the necessity to detect and avoid lithium plating in first life in order to safely reuse them in second life applications. This is part one of two papers dealing with safety testing aspects of aged cells with different degradation mechanisms.

1 July 2024 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
PDF file
TWThomas Waldmann
Thomas Waldmann
CHChristin Hogrefe
Christin Hogrefe
MFMarius Flügel
Marius Flügel
IPIvana Pivarníková
Ivana Pivarníková
CWChristian Weisenberger
Christian Weisenberger
MWMargret Wohlfahrt-Mehrens
Margret Wohlfahrt-Mehrens
Lithium deposition on anode surfaces can lead to fast capacity degradation and decreased safety properties of Li-ion cells. To avoid the critical aging mechanism of lithium deposition, its detection is essential. We present workflows for the efficient detection of Li deposition on electrode and cell level. The workflows are based on a variety of complementary advanced physico-chemical methods which were validated against each other for both graphite and graphite/Si electrodes: Electrochemical analysis, scanning electron microscopy, glow discharge-optical emission spectroscopy and neutron depth profiling, ex situ optical microscopy, in situ optical microscopy of cross-sectioned full cells, measurements in 3-electrode full cells, as well as 3D microstructurally resolved simulations. General considerations for workflows for analysis of battery cells and materials are discussed. The efficiency can be increased by parallel or serial execution of methods, stop criteria, and design of experiments planning. An important point in case of investigation of Li depositions are rest times during which Li can re-intercalate into the anode or react with electrolyte. Three workflows are presented to solve the questions on the occurrence of lithium deposition in an aged cell, the positions of lithium deposition in a cell, and operating conditions which avoid lithium depositions in a cell.

1 November 2024 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
MFMax Feinauer
Max Feinauer
AAAbdelaziz A. Abd-El-Latif
Abdelaziz A. Abd-El-Latif
PSPeter Sichler
Peter Sichler
MWMargret Wohlfahrt-Mehrens
Margret Wohlfahrt-Mehrens
MHMarkus Hölzle
Markus Hölzle
TWThomas Waldmann
Thomas Waldmann
It is known that both the material used in Li-ion battery cells, as well as their aging history and state of charge (SOC), strongly impact the safety of such cells. This study investigates the safety characteristics of new or aged 21700 cells containing silicon-graphite blend anodes together with Ni-rich NMC cathodes by accelerating rate calorimetry (ARC) at different SOC. Cells underwent cyclic aging at 0 °C, room temperature, or 50 °C to induce different aging mechanisms including Li plating and solid electrolyte interphase growth. The quasi-adiabatic heat-wait-seek ARC tests show lower temperatures for self-heating (SH), CID triggering, venting, and thermal runaway (TR) with increasing SOC, indicating reduced safety levels. Furthermore, the mass loss and TR intensity increase as the SOC of the cell increases. Aged cells show a similar SOC dependence as new cells in view of venting and TR, although both temperatures are reduced. The onset of SH at around 35 °C, independent of SOC, reveals a significant safety issue in cells with Li plating. Additional cell voltage monitoring and on-line mass spectrometry provide further insights into the decomposition processes. Our findings provide essential knowledge to improve the safety and design of Li-ion battery cells by identifying unsafe states.

1 November 2024 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
MFMax Feinauer
Max Feinauer
MWMargret Wohlfahrt-Mehrens
Margret Wohlfahrt-Mehrens
MHMarkus Hölzle
Markus Hölzle
TWThomas Waldmann
Thomas Waldmann
Competing effects of graphite and Si result in a complex temperature dependent performance and degradation of Li-ion batteries with Si-graphite composite anodes. This study examines the influence of varying the Si content (0 to 20.8 wt%) in Si-graphite composite anodes with consistent areal capacity and N/P ratio in full cells containing NMC622 cathodes. One hundred pilot-scale double-layer pouch cells were built and cycle aged in the temperature range from −10 to 55 °C. Electrochemical characterization demonstrated that increasing Si contents enhance capacity and mitigate internal resistance at low temperatures. On the other hand, high Si contents decrease charge-discharge energy efficiency and cycle life, particularly at elevated temperatures. Post-mortem analysis of aged electrodes, including physico-chemical characterization (scanning electron microscopy, energy-dispersive X-ray analysis, thickness measurements) and cell reconstruction revealed significant solid electrolyte interphase growth and increased loss of active material in anodes with high Si content. The optimum temperature for longest cycle life as derived from Arrhenius plots decreased from 30 °C for graphite anodes to 10 °C for cells with moderate Si content up to 5.8 wt%. These findings allow the design of optimized cells by balancing the Si content versus operating temperature in order to achieve lowest cell aging.

11 July 2025 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
YPYuliya Preger
Yuliya Preger
MFMax Feinauer
Max Feinauer
LTLoraine Torres-Castro
Loraine Torres-Castro
CHChristin Hogrefe
Christin Hogrefe
LGLucas S Gray
Lucas S Gray
TWThomas Waldmann
Thomas Waldmann
Understanding the safety profile of aged Li-ion batteries is essential for developing effective battery management and hazard mitigation strategies. However, most safety assessments have focused on fresh batteries, with just a few calorimetry studies on aged batteries with metal oxide positive electrodes. This study provides a broad assessment of commercial 18650-type Li-ion batteries with NCA, NMC, and LFP positive electrodes, both uncycled and aged under conditions that promoted solid electrolyte interphase (SEI) growth as the dominant degradation mechanism. The cells underwent mechanical (nail penetration, crush), electrical (overcharge, overdischarge), and thermal (accelerating rate calorimetry) abuse tests. Safety was rated on general characteristics such as mass loss, maximum temperature, and EUCAR (European Council for Automotive R&D) hazard level, as well as characteristics specific to individual abuse tests. Generally, aged cells with SEI growth exhibited similar or improved safety compared to uncycled cells, contrasting with our previous findings on NCA cells with Li plating as the dominant aging mechanism (Part I of this series). Yet, some tests and characteristics indicated reduced aged cell safety, such as earlier triggering of mechanical failure. These results emphasize the need to examine aged battery safety across diverse empirical techniques, degradation modes, and chemistries.