This study investigated the real‐time substructure shaking table testing (RTSSTT) of an equipment‐structure‐soil (ESS) system and the effects of soil on the seismic energy responses of the equipment‐structure (ES) subsystem. First, the branch modal substructure approach was employed to derive the formulas needed for the RTSSTT of the ESS system. Then, individual equations for calculating the energy responses of the equipment and the structure were provided. The ES subsystem was adopted as the experimental substructure, whereas the reduced soil model was treated as the numerical substructure when the RTSSTT was performed on the ESS system. The effectiveness of the proposed testing method was demonstrated by comparing the test results with those of the integrated finite element analysis. The energy responses of the ES subsystem in the case of rigid ground (i.e., the ES system) were compared with those considering the effects of soil (i.e., the ESS system). The input energy responses of the ES subsystem were found to decrease significantly after taking the effects of soil into account. Differences due to the soil effects should be considered in the seismic design for the ES system.
10 March 2020 in The Structural Design of Tall and Special Buildings
The real-time hybrid test is an effective testing method for soil–structure interaction research. Due to the data interaction time requirement and formula derivation method, the traditional real-time hybrid test of soil–structure interaction mostly employs a simple numerical substructure model. This study investigated the model construction and numerical simulation of a finite element soil substructure with high simulation accuracy and calculation efficiency. The soil was subdivided into near-field and far-field zones. A constrained mode–damping solvent extraction combined method was applied to the latter zone, reducing the soil’s computational scale and simulating the far-field energy dissipation effect. Then, the basic formula of the near-field zone–structure system was derived using the branch mode method, and the motion equation of the soil–structure system applied to real-time hybrid test was obtained. The soil’s numerical model was realized by the joint application of ANSYS and MATLAB software packages and verified through the real-time hybrid test of the soil–structure system. The results show that the proposed constrained mode–damping solvent extraction combined method had high calculation efficiency and good accuracy. It satisfied the requirements of the soil numerical substructure in real-time hybrid tests.
23 October 2018 in Advances in Mechanical Engineering
Based on the principle of real-time substructure shaking table test, an interactive numerical computation method which built the calculation model of each substructure in different software programs was proposed for seismic analysis of equipment–high rise structure–soil systems in order to account the effect of nonlinear soil. Considering that the response of soil under strong earthquakes does not totally enter the nonlinear stage, a locally nonlinear soil model was introduced as the numerical substructure, and the equipment–high rise structure subsystem was treated as an experimental substructure in this method. The equation of motion for the equipment–high rise structure–soil system was derived through a combination of the branch modal substructure and linear–nonlinear hybrid constraint modal substructure approaches. A 13-layer steel framework system model is used as an analytical example that the equipment–high rise structure system and local nonlinear soil computing model are built by MATLAB and ANSYS, respectively. The time histories of the system dynamic responses were obtained by interactive numerical computation, to investigate the effects of equipment–high rise structure–soil interaction on the seismic performance of the equipment and structure.
Real-time hybrid testing is an efficient testing technique that combines physical testing with numerical calculations to jointly evaluate the performance of complex structures under different external excitations. This study conducted a quantitative bibliometric analysis of 121 RTHT articles published between 1992 and 2025. The survey revealed that only 8% of all test applications addressed soil–structure interaction systems, merely 3% employed finite element models exceeding 10,000 DOFs, and more than 90% of the interface equations were still based on lumped mass assumptions. An RTHT framework based on the branch modal method was proposed to overcome these limitations. Within this framework, the numerical soil substructure was reduced from thousands of DOFs to approximately one hundred DOFs, with a verified peak acceleration error of below 7%. This approach offers a practical reference for real-time hybrid testing of complex systems.