1 October 2021 in Construction and Building Materials
12 January 2010 in Materials Science Forum
6 mm thick SiCp/2009Al composite and 2024Al-T351 alloy plates were successfully joined by friction stir welding (FSW) with and without the tool pin offsetting to the 2024Al side (denoted as NOS and OS samples, respectively), producing defect-free joints. The SiC particles from the composite were distributed along a ring structure in the nugget and the volume fraction of the SiC particles decreased as the tool pin offset to the 2024Al side. The Al-clad layer on the 2024Al plate was aggregated on the retreating side of the nugget after FSW. For the OS sample, the Al formed a layer along the nugget boundary. The strength of the NOS sample reached up to 85% of the 2024Al alloy with the joint failing in the heat affected zone on the 2024Al side. The strength of the OS samples was 47% of the 2024Al alloy due to the aggregated Al layer on the retreating side of the nugget which decreased the strength of the joint.
16 January 2019 in Shock and Vibration
This study investigated the real‐time substructure shaking table testing (RTSSTT) of an equipment‐structure‐soil (ESS) system and the effects of soil on the seismic energy responses of the equipment‐structure (ES) subsystem. First, the branch modal substructure approach was employed to derive the formulas needed for the RTSSTT of the ESS system. Then, individual equations for calculating the energy responses of the equipment and the structure were provided. The ES subsystem was adopted as the experimental substructure, whereas the reduced soil model was treated as the numerical substructure when the RTSSTT was performed on the ESS system. The effectiveness of the proposed testing method was demonstrated by comparing the test results with those of the integrated finite element analysis. The energy responses of the ES subsystem in the case of rigid ground (i.e., the ES system) were compared with those considering the effects of soil (i.e., the ESS system). The input energy responses of the ES subsystem were found to decrease significantly after taking the effects of soil into account. Differences due to the soil effects should be considered in the seismic design for the ES system.