The development of high-power light emitting diode (LED) for street lighting is growing continuously owing to its greater energy efficiency, long operating life and light control. Users of street lighting are compelled to adopt this technology over traditional light sources. An alternative solution based on a novel 9LEDM (9-LED module) and adaptive driver is shown. The design of the 9LEDM is derived from the thermal, photometric, power electronics techniques to meet the application of street lighting. The 9LEDM performances with a price less than 1$/Watt (W) and luminous flux higher than 110 Lumens (Lm)/W compared with traditional ones. Furthermore, several restrictions of driving the solid-state lighting loads are overcome by an adaptive street lighting driver with an AC/DC converter of a quasi-resonant operation flyback topology and with Soft Startup, Full ON, Half ON functions by sensing the ambient light and working temperature. Finally, a high performance/cost 50 W pole head as a design example is conducted to illustrate the complete design process, and the results from the demonstration projection with two pole heads of 50 W for a 12 m pole show a luminous intensity range from 38 to 19 lux with a heat sink temperature of 58°C and an energy saving more by 72% compared with conventional street lighting after three months of running.
The light-emitting diode (LED), a semiconductor optoelectronic device, is increasingly introduced into automotive signaling and lighting applications principally due to its exciting design style and long lifetime. Focusing on automotive contexts, numerous researchers have conducted the thermal optimization concerning structure and material properties in LED automotive lamps to maintain the junction temperature operating within a favorable range. However, these efforts mostly rely on thermal simulations with partly component models and specific boundary conditions, and moreover little temperature tolerance has been given from a whole-lamp-level aspect consisting of the electrical, optical, and mechanical requirements. To qualify the temperature tolerance in the thermal design for LED automotive lamps in in-vehicle environment, in this paper, after a description of the design database, the thermal cost objective function, weighted by the electrical, optical, and mechanical objectives, is defined. Then, the multiphysical 3-D simulation model has been made with whole parts in the LED automotive lamp, calibrated by junction temperatures of the typical modules, and integrated with the built database for a graphic user interface application. Finally the temperature sensitivity analysis based on the integrated platform has been performed to accurately estimate the temperature tolerance of the LED automotive lamp. The suggested methodology and experimental results cast light on balancing between the failure risks and costs in LED automotive lamps in the future cars.
A simple and efficient packaging technique with aluminium-core printed circuit board component embedded copper reflectors is presented for fabricating high-power white light emitting diode (LED) arrays. Three-dimensional finite element simulation and dynamic infrared imaging for analysis of the packaged nine-chips LED array are carried out to investigate the thermal and optical properties. The results show the method, which obtained a luminous efficiency of 126 lm/W and thermal resistance of 3.4 K/W, is suitable for high efficiency and low-cost LED based solid-state lighting.
Augmented reality (AR) applied in education provides learners a possible way for better understanding and thorough learning. Although the traditional projector is used to integrate the augmented information with real objects without wearing AR glasses, the projector-based AR system is unlikely to be adopted widely in education due to the cost, heavy weight, and space issues. In this paper, an alternative projector-camera AR platform, utilizing a digital light processing (DLP) module matched with a Beaglebone Black (BB) controller, is proposed for AR physical experiments. After describing the DLP-based AR learning design method, the algorithm of pre-deforming projection content with simulation-based poly fitting is presented to keep the virtual asset consistent with the user action; and then a prototype with the content regarding the thermal management of power devices is illustrated to validate the performance of the AR experimental platform. The result shows that the DLP-based AR platform is an accurate and interactive AR system with a response time of 1 s, and a registration deviation of 3 mm. It is also an affordable AR learning design tool with a bill of materials of about $200, and thus casts light on creating AR-based physical experiments to explore more physical phenomena.