Correlations between the structural properties and nonradiative recombination (NRR) behaviors of threading dislocations in freestanding hydride-vapor-phase-epitaxy (HVPE) GaN substrates were investigated using cathodoluminescence (CL), the etch pit method, transmission electron microscopy (TEM), and multiple-photon excitation photoluminescence (MPPL). A statistical analysis with a one-to-one comparison of 480 CL dark spots (prior to etching) with their corresponding etch pits shows that all dislocation types act as NRR centers with a strong correlation between the NRR rate at the dislocation cores and the pit size. Further TEM observations accurately determined the magnitude and direction of Burgers vectors for dislocations under each type of etch pit, which firmly links the NRR behaviors with the dislocation type. It is found that a dislocation pair composed of (a + c) and (−a + c) threading mixed-type dislocations (TMDs) is the strongest NRR center among the considered dislocation types. The pair runs along the c-axis with a stable distance of 42 nm between them. This is followed by other types of TMD pairs, a + c TMDs, ma + nc TMDs (m and n are integers, m > 1 or n > 1), 1c threading screw dislocations, and 1a threading edge dislocations in descending order of NRR rates. Three-dimensional (3D) dislocation images visualized by MPPL revealed that most of the dislocations are nearly parallel to the c-axis, while the a + c TMDs are susceptible to large tilting. MPPL also indicates that the ma + nc TMDs may result from several merging dislocations.
Light-emitting diodes (LEDs) have been demonstrated with a thin p-type layer using the plasmonic effect. Optimal LED device operation was found when using a 20-nm-thick p+-GaN layer. Ag of different thicknesses was deposited on the thin p-type layer and annealed to form the localized Ag particles. The localized Ag particles were embedded by indium tin oxide to form a p-type electrode in the LED structure. By optimization of the plasmonic LED, the significant electroluminescence enhancement was observed when the thickness of Ag was 9.5 nm. Both upward and downward electroluminescence intensities were improved, and the external quantum efficiency was approximately double that of LEDs without the localized Ag particles. The time-resolved photoluminescence (PL) decay time for the LED with the localized Ag particles was shorter than that without the localized Ag particles. The faster PL decay time should cause the increase in internal quantum efficiency by adopting the localized Ag particles. To validate the localized surface plasmon resonance coupling effect, the absorption of the LEDs was investigated experimentally and using simulations.