The relevance of the study is confirmed by the rapid development of automation in agriculture, in particular, horticulture; the lack of methodological developments to assess the effectiveness of the introduction of robotic technologies; and the need to expand the functionality of mobile robots. The purpose of the study was to increase the level of autonomy of a robotic platform for picking apple fruits based on a new method, develop a system of factors to determine the effectiveness of the introduction of robots in horticulture, and develop a control system using integrated processing of onboard data. The article discussed the efficiency factors for the introduction of robotic systems and technologies in agricultural enterprises specializing in horticulture within the framework of projects with different budgets. The study sample consisted of 30 experts—enterprises that have implemented robotic platforms and scientists specializing in this field. Based on an expert survey of enterprise specialists, a ranked list of 18 efficiency factors was obtained. To select an evaluation factor that determines the effectiveness of robotization and the developed control system, a method for calculating the concordance coefficient (method of expert analysis) was applied as a measure of the consistency of a group of experts for each group of factors. An analysis of the results of the expert evaluation showed that three factors are the most significant: the degree of autonomy of work; positioning accuracy; and recognition accuracy. The generalized indicator of local autonomy of task performance was estimated based on the analysis of a set of single indicators. A system for controlling the movement of an autonomous robotic wheeled platform based on inertial and satellite navigation and calculation of the path to be overcome was developed. The developed software allows for the design of a route for the robotic platform in apple horticulture to automatically perform various technological operations, such as fertilization, growth and disease control, and fruit harvesting. With the help of the software module, the X, Y coordinates, speed and azimuth of movement were given, and the movement of the platform along the given typical turn trajectories in an intensive horticulture environment was visualized.

This paper presents the design of a strawberry fruit head gripper unit, together with the concept of a control system for the operation of its mechanisms and vision system. The developed design consists of three specialised mechanisms: positioning, grasping, and cutting off of the fruit. A Finite Element Method (FEM) model was developed for the described design. Next, calculations were carried out, based on which the construction materials were selected. The key performance parameters of the functional model, built on the basis of the developed design concept, were verified under laboratory conditions. In tests carried out on the possible hematoma caused by exceeding the breaking stress induced by the pressure of the encompassing jaws on the fruit, it was found that none of the fruit tested suffered mechanical damage as a result of the sensor triggering force, and the average length of the trimmed stalk was approximately 14 mm. The designed head gripper, together with the proposed automation system, will contribute to improving harvesting precision, and this will favour a reduction in the quantitative and qualitative losses of the harvested crop. The experimental tests conducted under harvesting conditions showed a high efficiency of 95% in identifying ripe fruit, and the harvesting efficiency of the robotic arm was 90%.

This article presents the results of the economic and energy analysis of the operation of five types of windows in residential buildings. The aim of this study was to determine (a) to what extent the construction and various insulation parameters of windows affect the operating costs of buildings, when using different heating systems, (b) to what extent the significant cost of purchasing windows with better insulation is compensated by lower building operation costs (heating and the lifecycle of windows), (c) how the temperature difference inside the building affects heat loss through windows and, as a result, heating costs when using different heating systems. Five types of windows were selected for detailed analysis: a double- and a triple-glazed PVC window, double- and triple-glazed wooden window, and triple-glazed aluminum window. When wooden double-glazed windows are replaced with aluminum windows, the return on investment occurs in just 2 to 4.4 years. It was also found that of the five types of windows tested, the total economic balance of the operation period is the most favorable for PVC windows, regardless of the type of glazing and the heating system. The operating costs of PVC windows in a model residential building are over 30% lower than in the case of wooden windows and almost 20% lower compared to aluminum windows.

The research paper presents a prototype system controlling the flow of milk in the collection column of an autonomous milking apparatus. In the Matlab®-Simulink program, the simulation model of such a system was created. Its essential operation is illustrated in the block diagrams. The logic verification of the model’s operational accuracy (off-line simulation) did not reveal errors. Therefore a laboratory stand for hardware verification – (on-line simulation) was developed. Within it a virtual feedback loop of the control system (stored in computer memory), with elements of real object control incorporated – in this way a prototype of the device was created. During the hardware verification of the proposed technical solution, operation errors were not observed. In response to certain signals from the measuring elements, the controller correctly calculated control signals for the actuators.

In this work, the possibility of limiting energy consumption in the manufacturing process of bioethanol to obtain biofuel was analysed. For this purpose, a control algorithm has been optimised while retaining the good quality of the control signals. New in this study is the correlation of the control algorithm not only with the signal’s quality, but also with the energy consumption in such an energy-intensive process as rectification. The rectification process in a periodic production system has been researched. The process was modelled on a test station with the distillation mixture capacity of 25 dm³. For the optimization, the following control algorithms have been applied: relay, PID and PID after modification to I-PD. The simulation was carried out on a transfer function model of the plant that has been verified on a real object, a rectification column. The simulations of energy consumption and control signal’s quality have been carried out in the Matlab^®-Simulink environment after implementing the model of the research subject and control algorithms. In the simulation process, an interference signal with an amplitude of 3% and frequency of 2 mHz was used. The executed analyses of the control signal quality and the influence of the control algorithm on the energy consumption has shown some essential mutual relationships. The lowest energy consumption in the rectification process can be achieved using the I-PD controller—however, the signal quality deteriorates. The energy savings are slightly lower while using the PID controller, but the control signal quality improves significantly. From a practical point of view, in the considered problem the best control solution is the classic PID controller—the obtained energy effect was only slightly lower while retaining the good quality of the control signals.

The research attempts to determine the possibility of using the phenomenon of natural luminescence of matter to evaluate the quality of coal. For the experiment, a measuring station equipped with a photomultiplier was used to identify photons emitted by optically piqued matter. The process of measuring the number of photons emitted was performed automatically, to which the LabView programming environment was used. There was a difference in the number of photons within the tested groups of coal. It has been observed that there is a practical possibility of differentiating matter in terms of photon emission levels.