Recycled concrete aggregates (RCAs) have low quality when compared with natural or conventional aggregates as the paste adhering to it is the key aspect that affects its functionality. Since the adhering cementitious paste weakens the adhesion between the aggregate and the binder, it becomes a decisive factor in the mechanical behavior of the asphalt mixture. It turns out that enhancing the surface of the aggregate or eliminating the paste attached to the NA (natural aggregate) is crucial for improving interfacial bonding. Therefore, the treatment and evaluation of the RCAs by laboratory testing method were studied in this research to assess their reuse in the asphalt pavement surface coarse layer. With the various techniques for removing paste from the RCA, a combination of three enhancement processes were developed for the effective removal of the cement paste, which are mechanical, chemical, and 400 °C conditioning thermal treatment. The RCAs were first charged in a Los Angeles machine for the mechanical treatment to remove parts of the attached cement. Then they were soaked in two types of acids, namely hydrochloric and sulfuric, with different concentrations to determine the most effective or optimum molarity for about a 48 h soaking duration. Then a 2 h thermal treatment was conducted on the RCA samples. After all the treatments were done, the RCA aggregates were subjected to different types of tests to examine their properties in order to ensure their full potential in terms of their physical, chemical, mineralogical, and surface microstructure characteristics. Based on the experiment design, the study intends to examine the quality of the treated recycled aggregates generated by the combination approach as well as to investigate the optimal acid concentration and type. The results show that the proposed mechanochemical and thermal treatment reinforced the quality of the RCAs when compared to the non-treated samples. Meanwhile, HCl proved to be the optimum compared to H₂SO₄ in most examinations of the properties. In the end, better chemical qualities were validated, and the RCA qualities were improved.

Micro-surfacing (MS), made of emulsified asphalt, is the most commonly used preventive maintenance technology in asphalt pavement. However, the studies on profile features of MS based on aggregate morphology are few. This study evaluated the profile features of MS and its effect on skid resistance. The aggregate morphologies were first characterized and modified emulsified asphalt was prepared. The three-dimensional profile features of four kinds of MS samples were captured by laser texture scanner. Results illustrate that steel slag aggregate can be used to enhance the skid resistance of pavement surface and bring about larger profile indexes than basalt and limestone due to its angularity index and flatness values. Further aging of steel slag to eliminate free calcium oxide (f-CaO) is recommended before being used in pavement surface layer.

The precise and visual analysis of solid waste recycling in concrete construction engineering is critical for the development of ecological civilization and for the secure supply of resources. This research makes a bibliometric analysis of the solid waste application in concrete construction engineering from 2000 to 2021 based on the Web of Science. The global bibliometric status, current research focus and future directions were used to indicate the global development of solid waste recycling in concrete construction engineering. The most reused solid wastes and most solid waste productive regions were concluded with this bibliometric analysis. China is far ahead of other countries in solid waste recycling in all aspects and heavy metal is one of the most prominent solid waste themes in China. By analyzing the most studied solid waste, fly ash appears to be the most popular and is widely used; half of the top ten-cited papers are correlated with it.