Monolayer semiconductors are atomically thin quantum wells with strong confinement of electrons in two-dimensional (2D) plane. Here, we experimentally study the out-of-plane polarizability of excitons in hBN-encapsulated monolayer WSe2 in strong electric fields of up to 1.6 V/nm (16 MV/cm). We monitor free exciton photoluminescence peaks with increasing electric fields at a constant carrier density, carefully compensating for unintentional photodoping in our double-gated device at 4 K. We show that the Stark shift is smaller than 0.4 meV despite the large electric fields applied, yielding an upper limit of polarizability αz to be ~ 10-11 Dm/V. Such a small polarizability, which is nearly two orders of magnitude smaller than the previously reported value for MoS2, indicates strong atomic confinement of electrons in this 2D system and highlights the unusual robustness of free excitons against surface potential fluctuations.
Photoacoustic devices generating high-amplitude and high-frequency ultrasounds are attractive candidates for medical therapies and on-chip bio-applications. Here, we report the photoacoustic response of graphene nanoflakes – Polydimethylsiloxane composite. A protocol was developed to obtain well-dispersed graphene into the polymer, without the need for surface functionalization, at different weight percentages successively spin-coated onto a Polydimethylsiloxane substrate. We found that the photoacoustic amplitude scales up with optical absorption reaching 11 MPa at ∼ 228 mJ/cm2 laser fluence. We observed a deviation of the pressure amplitude from the linearity increasing the laser fluence, which indicates a decrease of the Grüneisen parameter. Spatial confinement of high amplitude (> 40 MPa, laser fluence > 55 mJ/cm2) and high frequency (Bw-6db ∼ 21.5 MHz) ultrasound was achieved by embedding the freestanding film in an optical lens. The acoustic gain promotes the formation of cavitation microbubbles for moderate fluence in water and in tissue-mimicking material. Our results pave the way for novel photoacoustic medical devices and integrated components.
Cavitation bubbles are used in medicine as a mechanism to generate shock waves. The study of cavitation bubble dynamics plays a crucial role in understanding and utilizing such phenomena for practical applications and purposes. Since the lifetime of cavitation bubbles is in the range of hundreds of microseconds and the radii are in the millimeter range, the observation of bubble dynamics requires complicated and expensive equipment. High-speed cameras or other optical techniques require transparent containers or at least a transparent optical window to access the region. Fiber optic probe tips are commonly used to monitor water pressure, density, and temperature, but no study has used a fiber tip sensor in an interferometric setup to measure cavitation bubble dynamics. We present how a fiber tip sensor system, originally intended as a hydrophone, can be used to track the expansion and contraction of cavitation bubbles. The measurement is based on interference between light reflected from the fiber tip surface and light reflected from the cavitation bubble itself. We used a continuous-wave laser to generate cavitation bubbles and a high-speed camera to validate our measurements. The shock wave resulting from the collapse of a bubble can also be measured with a delay in the order of 1 µs since the probe tip can be placed less than 1 mm away from the origin of the cavitation bubble. By combining the information on the bubble expansion velocity and the time of bubble collapse, the lifetime of a bubble can be estimated. The bubble expansion velocity is measured with a spatial resolution of 488 nm, half the wavelength of the measuring laser. Our results demonstrate an alternative method for monitoring bubble dynamics without the need for expensive equipment. The method is flexible and can be adapted to different environmental conditions, opening up new perspectives in many application areas.
Efficient operation of light-to-pressure transducers and flexible fabrication on demand are key factors for the use of photoacoustic devices in various biomedical disciplines. Graphene layers can be grown at wafer scale and transferred to any surface geometry, providing a versatile approach for the development of photoacoustic emitters with a large and nearly uniform thermal interface. Here we report the picosecond excitation of a photoacoustic emitter consisting of a large-area, 10-layer graphene grown by chemical vapour deposition and encapsulated with a polydimethylsiloxane. The theoretical and experimental studies address the generation of broadband ultrasounds upon excitation with nanosecond and picosecond laser pulses, showing how the multilayer graphene can serve as an ultrafast nanoheater to drive efficient expansion of the adjacent polymer layer in the picosecond regime. The picosecond excitation results in a sharper acoustic waveform, and the pressure evolution time is twice as short with a 30 ps excitation as with a 6 ns pulse, thus satisfying the thermal and stress confinement conditions, while energy loss occurs with nanosecond excitation. We experimentally observed that the 10-layer graphene/polydimethylsiloxane generates a high-frequency photoacoustic wave with a bandwidth of about 110 MHz at −6 dB, increasing to 250 MHz at −20 dB, due to stress confinement, increased thermal interface, and ultrafast dynamics. The peak pressure of 0.85 MPa in 3.4 nm thick graphene multilayers (∼20 % absorption of 40 mJ cm–2) is remarkably high, demonstrating its potential as a photoacoustic material and the advantages of combining picosecond excitation with large-area graphene in wave transmission technologies.
We present a laser induced ultrasound and the localization of cavitation bubbles using an optoacoustic spherical Ti/black-TiOx lens. Results demonstrate the possibility to localize cavities and secondary ablative effects into the subsurface tissue.