Firefighting and evacuation training are important tasks in maritime education and training, especially for crews working on large passenger ships, to ensure the safety of the vessel, cargo and passengers. With the evolution of virtual reality (VR) technology and the introduction of wearable hardware, a change in paradigm has happened in firefighting and evacuation training where these new technologies are being introduced. This paper serves as a review on the use of VR technology in maritime firefighting and evacuation training, trying to answer the following questions: what is the current state of using VR technology, and what are the research gaps that need to be addressed to further accelerate the implementation of VR? Research shows that other industries have adopted the use of VR technology relatively quickly, but the maritime industry still seems reluctant. As for the research gaps, the physics-based modelling of fire spread is discussed along with two other topics: the lack of immersive solutions for evacuation and the potential for developing search and rescue scenarios onboard a ship.

Over the past decade regulatory emission control has been adopted and even stricter emission reductions are being considered. In order to comply with the present and future regulations the ship owners and engine manufacturers are facing a difficult task. The shipping industry is presently offering multiple choices such as scrubbers and Selective Catalytic Reduction (SCR), dual fuel engines, Liquefied Natural Gas / Liquefied Petroleum Gas (LNG/LPG) powered engines, and lately the introduction of methanol and ethanol as alternative fuels. This work presents a short overview of the possible use of methanol and ethanol as lternative fuels in shipping. The first part of this work deals with physical properties of methanol and ethanol, production and availability, as well as advantages and disadvantages in comparison with other fuels. In the second part the cost perspective is presented together with the cost-benefit analysis, which is the most important aspect in the ship owner’s decision whether to invest into the new alternative. Methanol and ethanol are not magical solutions, but rather another alternative which, from the cost perspective, offers a potential under certain circumstances. These circumstances are competitive prices in comparison to Marine Gas Oil (MGO) and time spent in Emission Control Area (ECA) which should be a large portion of the total sailing time. In this paper the scientific methodology was followed by using the method of compilation, the descriptive and the comparative methods.

Fiber reinforced polymer (FRP) composites coupons were exposed to real sea environment to assess the influence on the mechanical behavior of composite materials used in the construction of marine structures. Real-life sea environment conditions were opted for instead of the more common simulated and laboratory versions of seawater in the attempt to obtain more realistic structural modeling environmental input design parameters for marine structures. Exposure was performed over prolonged time span instead of the usual accelerated tests. Epoxy and polyester resins, reinforced with glass fibers in three fiber layout configurations, were used to manufacture standardized tensile testing coupons. Mass changes due to seawater absorption, microorganism growth, changes in tensile strength (standard tensile tests), and surface morphology of the coupons were evaluated after 6- and 12-month long periods of submersion in the sea in the Rijeka bay, Croatia. All specimens showed mass increase due to water absorption and growth of attached algae and sea microorganisms. Various levels of reduction in tensile strength, depending on the fiber layout configurations, were observed. Significant changes in the matrix material structure were noticed, effectively producing “voids”. Based on these results, sustainability of FRP composites in marine environment is addressed and discussed.

Carbon dioxide emissions have become a growing problem worldwide. Global institutions are addressing this problem and developing solutions. Countries that are aware of this problem are implementing regulations that affect global industry and, in particular, maritime transport. Considering that the combustion process, namely, diesel, remains the main energy conversion process on board ships, the question arises: what is the best solution to reduce pollutant emissions? Coastal countries have taken various measures to reduce the emission of harmful gases into the marine environment. The problem with these measures is that it is difficult to accurately predict their impact. This paper looks at one of these measures (slow-steaming) to determine how it affects carbon dioxide emissions from different types of ships and their modes of operation. Engine room simulators were used to study two marine power plants under different operating conditions. Fuel consumption was measured, i.e., flows from heavy fuel oil and diesel oil service tanks to all consumers, and carbon emissions were calculated accordingly. The study showed a large reduction in carbon dioxide emissions in the case of a modern power plant ship, and large deviations when all operating modes were compared.

Air pollution from ships is increasing due to higher global demand of goods, and with them, global emission standards as well. These standards are prescribed by MARPOL Annex VI and the introduction of emission control areas (ECA). Ships built before 1990. do not have to comply with these rules, but ships built after the early 2000. must follow "NOx Emission Tier I", which allows 17g/kWh NOx (for the slow speed diesel engines with <130 rpm), and selective catalytic reactors (SCR) are not necessary. Tier III NOx Emission standard was enforced in 2016 and it requires an 80% reduction in NOx emission compared to the Tier I, specifically 3.4 g/kWh, which can not be achieved without SCR or without using some other types of fuels. The focus of this paper is to do analysis how the ammonia dosage to SCR affects to the NOx formation in exhaust gasses on various engine speed (loads), as well as how it affects to some important engine parameters and specific fuel oil consumption (SFOC). The analysis was performed on Kongsberg engine room simulator (ERS), MC 90-V Model, as well as on MATLAB by using mathematical models. All external influences are excluded from the analysis like wind or rough sea. All data on different scenarios has been recorded after prolonged period to avoid inconsistencies. The results are shown graphically, and conclusions arc presented.

Maintenance intervals and approaches for marine equipment have been the subject of numerous studies, focusing on previous failure patterns and associated risks. However, in vessels like drillships, operating under high reliability requirements and possessing significant redundancy, maintenance strategies have a critical impact on overall performance. This study investigates the influence of operational configurations on maintenance intervals and approaches for generator engine subcomponents onboard a drillship. Using data on injector failures onboard drillships, we employ the maintenance concept adjustment and design (MA-CAD) method to analyse and determine maintenance intervals across various operational configurations. Initially, we analyse the failure pattern of fuel injectors and propose a reduction in maintenance intervals through Weibull probability distribution fitting. Additionally, a risk analysis is conducted to assess the impact of operational configurations on risk indices related to fuel injector reliability and safety consequences. Our findings reveal that different operational configurations of the power generation plant can lead to changes in risk indices, shifting injector reliability status from unacceptable to undesirable limits. Consequently, maintenance intervals need to be adjusted as well to ensure optimal performance and safety. Furthermore, considering various engine subcomponents and their reliability under different operational configurations suggests the need for tailored maintenance approaches. This research provides insights into optimising maintenance strategies for drillship, ensuring reliability and safety across diverse operational scenarios.