Vedrana Špada

Dr. Vedrana Špada

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 August 2021 in Polymers
Verified
Journal Article
Open access
PDF file
MZMartina Zeljko
Martina Zeljko
Vesna Ocelić BulatovićVesna Ocelić Bulatović
Vesna Ocelić Bulatović
VŠVedrana Špada
Vedrana Špada
SBSanja Lučić Blagojević
Sanja Lučić Blagojević
The development of coatings that maintain the attractive natural appearance of wood while providing ultraviolet (UV) protection is extremely important for the widespread use of wood products. In this study, the influence of different types (powder form and aqueous dispersions) of TiO2 in an amount of 1.0 wt% by monomer weight on the properties of environmentally friendly polyacrylate (PA)/TiO2 emulsions prepared by ex situ and in situ polymerization, as well as on the UV-protective properties of the coating films, was investigated. The results showed that the addition of TiO2 significantly affected the particle size distribution of PA and the viscosity of PA varied according to the preparation method. Compared with the ex situ preparation method, in situ polymerization provides better dispersibility of TiO2 nanoparticles in PA coating film, as well as a better UV protection effect and greater transparency of the coating films. Better morphology and transparency of nanocoating films were achieved by adding TiO2 nanofillers in aqueous dispersion as compared to the addition of TiO2 in powder form. An increase in the glass transition temperature during UV exposure associated with cross-linking in the polymer was less pronounced in the in situ-prepared coating films, confirming better UV protection, while the photocatalytic effect of TiO2 was more pronounced in the ex situ-prepared coating films. The results indicate that the method of preparation has a significant influence on the properties of the coating films.

28 May 2021 in Water
Verified
Journal Article
Open access
PDF file
Christian FerrarinChristian Ferrarin
Christian Ferrarin
PPPierluigi Penna
Pierluigi Penna
Antonella PennaAntonella Penna
Antonella Penna
VŠVedrana Špada
Vedrana Špada
FRFabio Ricci
Fabio Ricci
Mauro MariniMauro Marini
Mauro Marini
The aim of this study is to develop a relocatable modelling system able to describe the microbial contamination that affects the quality of coastal bathing waters. Pollution events are mainly triggered by urban sewer outflows during massive rainy events, with relevant negative consequences on the marine environment and tourism and related activities of coastal towns. A finite element hydrodynamic model was applied to five study areas in the Adriatic Sea, which differ for urban, oceanographic and morphological conditions. With the help of transport-diffusion and microbial decay modules, the distribution of Escherichia coli was investigated during significant events. The numerical investigation was supported by detailed in situ observational datasets. The model results were evaluated against water level, sea temperature, salinity and E. coli concentrations acquired in situ, demonstrating the capacity of the modelling suite in simulating the circulation in the coastal areas of the Adriatic Sea, as well as several main transport and diffusion dynamics, such as riverine and polluted waters dispersion. Moreover, the results of the simulations were used to perform a comparative analysis among the different study sites, demonstrating that dilution and mixing, mostly induced by the tidal action, had a stronger effect on bacteria reduction with respect to microbial decay. Stratification and estuarine dynamics also play an important role in governing microbial concentration. The modelling suite can be used as a beach management tool for improving protection of public health, as required by the EU Bathing Water Directive.

8 October 2022 in Coatings
Verified
Journal Article
Open access
PDF file
MSMarina Samardžija
Marina Samardžija
VAVesna Alar
Vesna Alar
VŠVedrana Špada
Vedrana Špada
Ivan StojanovićIvan Stojanović
Ivan Stojanović
During exploitation, the properties of the epoxy coating deteriorate and therefore, it is necessary to modify it with metal particles. In this paper, spherical aluminium nanoparticles (Al NP) of 100 nm with 99.9% purity were used to modify the epoxy coating for the better corrosion protection of grey cast iron. Pure Al has a high corrosion resistance and can form a thin protective film that prevents its further oxidation, thus, becoming inert and environmentally friendly. To examine these facts, different concentrations (0.5, 0.75, 1.0, 3.0, and 6.0 wt.%) of Al nanoparticles were dispersed in the epoxy coating. The surface of the modified nanocomposite coating was analysed using scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS). Furthermore, the physical properties such as colour, thickness, hardness, and adhesion to the cast iron surface were tested as well. The same properties were tested by exposing the sample plates to corrosive conditions in the climate chamber. Their anticorrosion properties were investigated using electrochemical impedance spectroscopy (EIS) by their immersion in 3.5 wt.% NaCl solution as a corrosive medium. The coating with 0.75% Al NP showed the best corrosion resistance after 10 days of exposure in salt water, while the sample with 1.0% Al NP showed the best corrosion resistance after exposure to the icing/deicing process.

10 December 2013 in Journal of Composite Materials
Verified
Journal Article
Closed access
ZKZvonimir Katančić
Zvonimir Katančić
LKLjerka Kratofil Krehula
Ljerka Kratofil Krehula
Anita Ptiček SiročićAnita Ptiček Siročić
Anita Ptiček Siročić
VŠVedrana Špada
Vedrana Špada
ZHZlata Hrnjak-Murgić
Zlata Hrnjak-Murgić
In this study fire retarded HDPE/WF composites based on high density polyethylene (HDPE) and wood flour (WF) were investigated. Polymer and WF ratio was kept at 70/30 while concentration of fire retardant was 20 mass %. Ammonium polyphosphate and aluminum hydroxide were used as fire retardants. To diminish the influence of high loadings of fire retardants on mechanical properties two different types of organically modified nanofillers (CaCO3 and SiO2) were used. Surface modification of HDPE polymer and nanofiller was done to enhance the compatibility in composite and improve the mechanical properties and fire performance. Mechanical properties were characterized by dynamic mechanical analysis while compatibility of components in composites was followed through morphology by scanning electron microscopy. Thermal and fire properties were characterized by thermogravimetric analysis, pyrolysis combustion flow calorimetry, and limiting oxygen index. The obtained results show that addition of surface modified nanofiller considerably affects the morphology resulting in the enhancement of mechanical and fire properties. Ammonium polyphosphate fire retardant in combination with SiO2 nanofiller showed the highest limiting oxygen index value, the lowest heat release rate, and total heat released in pyrolysis-combustion flow calorimetry test indicating best overall fire performance.

1 April 2021 in Progress in Organic Coatings
Verified
Journal Article
Closed access
Sanja MartinezSanja Martinez
Sanja Martinez
IŠIvana Šoić
Ivana Šoić
VŠVedrana Špada
Vedrana Špada

4 September 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
Goran VizentinGoran Vizentin
Goran Vizentin
DGDarko Glujić
Darko Glujić
VŠVedrana Špada
Vedrana Špada
Fiber reinforced polymer (FRP) composites coupons were exposed to real sea environment to assess the influence on the mechanical behavior of composite materials used in the construction of marine structures. Real-life sea environment conditions were opted for instead of the more common simulated and laboratory versions of seawater in the attempt to obtain more realistic structural modeling environmental input design parameters for marine structures. Exposure was performed over prolonged time span instead of the usual accelerated tests. Epoxy and polyester resins, reinforced with glass fibers in three fiber layout configurations, were used to manufacture standardized tensile testing coupons. Mass changes due to seawater absorption, microorganism growth, changes in tensile strength (standard tensile tests), and surface morphology of the coupons were evaluated after 6- and 12-month long periods of submersion in the sea in the Rijeka bay, Croatia. All specimens showed mass increase due to water absorption and growth of attached algae and sea microorganisms. Various levels of reduction in tensile strength, depending on the fiber layout configurations, were observed. Significant changes in the matrix material structure were noticed, effectively producing “voids”. Based on these results, sustainability of FRP composites in marine environment is addressed and discussed.