Bimetallic catalysts based on multi-walled carbon nanotubes (MWCNT), graphene oxide (GO) and ultradispersed diamonds (UDD) supports for the process of electroreduction of oxygen from alkaline electrolyte were obtained using high-temperature synthesis. The materials were characterized by low-temperature nitrogen adsorption, Raman spectroscopy, scanning electron microscopy and X-ray structure analysis. The synthesized bimetallic catalysts contain meso- and micropores. Based on the study by Raman spectroscopy, it is shown that high-temperature synthesis of MWCNT with metal phthalocyanines leads to doping of this material with nitrogen and the appearance of significant defects in the structure. Carbon nanotube-based catalysts showed enhanced activity compared to other carbon materials. Moreover, bimetallic catalysts based on cobalt phthalocyanine and palladium (MWCNT_CoPc_Pd) are characterized by higher activity on all carbon supports compared to materials contain on copper and palladium. The specific current density in the diffusion region of the MWCNT_CoPc_Pd catalyst is comparable to a commercial platinum electrode (Pt(20%)/C) and equals to 2.65 mA/cm2. The area of the electrochemically active surface of all the obtained catalysts was calculated from the CV data in a nitrogen atmosphere. The MWCNT_CoPc_Pd catalyst is characterized by high corrosivity: after 2500 revolutions, the current density in the diffusion region decreases by 7%, and, also, an increase in the values of E1/2 and Eonset is observed.
The main obstacle to the widespread dissemination of fuel cells is the high cost, so researchers are actively searching for ways to replace the expensive platinum catalyst with cheaper analogs. In this paper we studied the Ag- and Pd-containing carbon catalysts based on carbon nanotubes and graphene oxide. The study of the textural characteristics of the catalysts showed that the greatest specific surface area has a catalyst based on MWCNT containing 10% silver, all synthesized catalysts are mainly mesoporous, and the content of micropores is insignificant. Raman spectroscopy and SEM data indicate a significant change in the structure of the modified carriers compared to pure MWCNT and GO. An electrochemical experiment was performed and linear voltammetric diagrams were obtained and compared with the voltammetric diagrams obtained on the platinum catalyst. GO_Ag 10% and MWCNT_Ag 10% Pd 10% are closest in the values of kinetic parameters in both kinetic and diffusion regions. GO_Ag 10% has the highest initial potential Eonset = −0.145 V and MWCNT_Ag 10% Pd 10% has the highest half-wave potential E½ = −0.23 V. The studied catalysts have characteristics comparable to those presented in the literature.
1 October 2011 in Russian Journal of Applied Chemistry
Kinetics of two reactions: hydrolysis of esters and condensation of cyclohexanone in an alkaline environment, was studied in model mixtures. Derived kinetic equations were used to assess optimal...
1 July 2014 in Russian Journal of Applied Chemistry
Impurities in the oxidate, which was produced in the oxidation of cyclohexane in an industrial environment, were analyzed and identified. It is found that the amount of esters and ethers is 30% of...