The design and performance of a high-efficiency broadband and polarization-independent reflective grating is reported. The physical mechanism of the gratings can be described by the modal method. By using rigorous coupled wave analysis (RCWA) and simulated annealing (SA) algorithms, the parameters of grating were optimized. The calculated diffraction efficiencies of −1st order for TE and TM polarizations in Littrow mounting exceeded 95%, from 988 nm to 1122 nm, and by over 98% in the bandwidth ranging from 1015 nm to 1085 nm, with the value of polarization-dependent loss (PDL) lower than 0.06 dB. Moreover, the electric field distribution of the grating was simulated by the finite element method (FEM), which demonstrated that most of the energy of the incident light was diffracted to the −1st order and the electric field was distributed almost outside the grating. In addition, the great fabrication tolerances and incident angle tolerance ensured high performance of the designed grating in manufacture and application. With its properties of high efficiency, broadband, and polarization-independence, the designed grating should be of great interest for lots of practical applications, including chirped pulse amplification (CPA), interferometers, and spectrometers.
Diffraction gratings play an increasingly important role in various planar optical systems, such as near-eye display systems for virtual reality (VR) and augmented reality (AR). The slanted gratings have more advantages than other elements. A 1 × 2 transmission two-dimensional (2D) slanted grating based on a double-layer cylindrical structure was proposed in this paper. In the initial phase of this study, this kind of grating was proposed and designed. We used rigorous coupled-wave analysis (RCWA) and simulated annealing algorithm (SA) to optimize the grating parameters. The effects of the grating geometric parameters on the diffraction efficiency were investigated using rigorous coupled-wave analysis (RCWA). The simulated annealing algorithm (SA) optimization results show that the diffraction efficiency of the (0, −1) and (−1, 0) order exceed 35% under normal incidence in the range of 429–468 nm wavelength for TE and TM polarization. Meanwhile, the total diffraction efficiency can reach up to 78%. In the last section, we discuss the tolerances for the grating parameters to ensure high quality manufacturing processes. The total effective efficiency is greater than 75% when the MgF2 thickness is from 300 nm to 350 nm and the SiO2 thickness is from 525 nm to 550 nm. Moreover, the grating period has a 53 nm fabrication tolerance, and the slanted angle has a 8.8-degree fabrication tolerance. The relatively large tolerances ensure that it is easy to fabricate the two-dimensional slanted grating and to achieve the targeted objectives. The proposed 2D slanted grating can be applied to 2D exit pupil expansion, which is of great importance in AR/VR applications.