All-dielectric perfect absorbers powered by quasi-bound states in the continuum (-BIC) are of great importance for developing high-performance optoelectronic devices because they provide high Q-factor absorption. However, these structures usually require the addition of metal back reflectors or degenerate critical coupling to achieve high absorption, which often introduces problems such as Joule heat output and sensitivity to geometrical parameters. In this work, we present an all-dielectric high Q-factor metasurface perfect absorber (MPA) with a cell structure consisting of split Si elliptical disks. By adjusting the tilt angle of the gap, the metasurface can excite a single quasi-BIC resonance in a highly reflective background, corresponding to the electric quadrupole (EQ) mode. Due to the asymmetric coupling of the EQ mode, the proposed metasurface easily breaks the 50% absorption limit. At the wavelength of 894.645 nm, the metasurface achieves a perfect absorption of more than 99% and has a Q-factor of up to 1955. In addition, the structure shows excellent tolerance to geometrical parameters while ensuring high absorption performance. By adjusting the polarization angle, we have also achieved an arbitrary tuning of the absorption efficiency without frequency shift. This work provides a viable scheme for the design of tunable, large-tolerance, and high-Q all-dielectric MPAs, which have a broad potential application in the fields of optical filtering, optical switching, and polarization detection.
All-dielectric nanostructures have attracted attention for highly efficient light manipulation. Higher Q-factor Fano resonance can be excited due to the rich phenomenology of optical modes supported by high-index dielectric materials with low intrinsic material loss, including both electric and magnetic multipolar Mie resonances. So far, there have been few studies done on the sensing with Fano-resonant all-dielectric resonator nanostructures. Here, an all-dielectric self-referenced optical sensor is numerically demonstrated based on Si quadrumers and mirror-symmetric one-dimensional photonic crystals (1DPCs) hybridstructure, operating at the infrared wavelength range with higher sensing performance and much more stable reference signal. Magnetic Fano resonance and Fabry-Perot resonance were combined into such a hybridstructure for the first time. The influences of the gap distance, including x and y, on the coupling effects between the Si nanodimers along the polarization direction and the 1DPCs are systematically discussed. The sensing performance has been numerically investigated in different analytes with the sensitivity and figure of merit (FOM) of 760 nm/RIU and 1515 RIU1 respectively, which paves the way to be a much more sensitive detection of small refractive index changes in an unstable environment and suggests potential applications in biological and chemical sensing.
The design and performance of a high-efficiency broadband and polarization-independent reflective grating is reported. The physical mechanism of the gratings can be described by the modal method. By using rigorous coupled wave analysis (RCWA) and simulated annealing (SA) algorithms, the parameters of grating were optimized. The calculated diffraction efficiencies of −1st order for TE and TM polarizations in Littrow mounting exceeded 95%, from 988 nm to 1122 nm, and by over 98% in the bandwidth ranging from 1015 nm to 1085 nm, with the value of polarization-dependent loss (PDL) lower than 0.06 dB. Moreover, the electric field distribution of the grating was simulated by the finite element method (FEM), which demonstrated that most of the energy of the incident light was diffracted to the −1st order and the electric field was distributed almost outside the grating. In addition, the great fabrication tolerances and incident angle tolerance ensured high performance of the designed grating in manufacture and application. With its properties of high efficiency, broadband, and polarization-independence, the designed grating should be of great interest for lots of practical applications, including chirped pulse amplification (CPA), interferometers, and spectrometers.
Diffraction gratings play an increasingly important role in various planar optical systems, such as near-eye display systems for virtual reality (VR) and augmented reality (AR). The slanted gratings have more advantages than other elements. A 1 × 2 transmission two-dimensional (2D) slanted grating based on a double-layer cylindrical structure was proposed in this paper. In the initial phase of this study, this kind of grating was proposed and designed. We used rigorous coupled-wave analysis (RCWA) and simulated annealing algorithm (SA) to optimize the grating parameters. The effects of the grating geometric parameters on the diffraction efficiency were investigated using rigorous coupled-wave analysis (RCWA). The simulated annealing algorithm (SA) optimization results show that the diffraction efficiency of the (0, −1) and (−1, 0) order exceed 35% under normal incidence in the range of 429–468 nm wavelength for TE and TM polarization. Meanwhile, the total diffraction efficiency can reach up to 78%. In the last section, we discuss the tolerances for the grating parameters to ensure high quality manufacturing processes. The total effective efficiency is greater than 75% when the MgF2 thickness is from 300 nm to 350 nm and the SiO2 thickness is from 525 nm to 550 nm. Moreover, the grating period has a 53 nm fabrication tolerance, and the slanted angle has a 8.8-degree fabrication tolerance. The relatively large tolerances ensure that it is easy to fabricate the two-dimensional slanted grating and to achieve the targeted objectives. The proposed 2D slanted grating can be applied to 2D exit pupil expansion, which is of great importance in AR/VR applications.
20 April 2021 in Microwave and Optical Technology Letters
To achieve accurate and efficient measurement of large-scale, high-density grating periods, this study presents a prism-grating interferometer and an improved measurement algorithm. The high-density grating was fixed on a translation stage; a laser interferometer collected the stage’s real-time displacement data, which were jointly processed with interference signals from the prism-grating interferometer to solve the grating period accurately. Based on a first-order Taylor expansion least-squares iterative mechanism, the improved algorithm optimizes nonlinear models via linearization, ensuring measurement accuracy while reducing single-iteration time to 62.9% of the traditional least-squares method and significantly cutting iteration counts. Experimental verification conducted on a reflective grating with a period of 833 nm and a clear aperture of 360×20mm shows that within the 360 mm measurement range (covering 360 groups of 1 mm intervals), the average grating period is 833.3367±15.7pm, and the average relative repeatability reaches 4.2 ppm. This combined scheme offers high precision and efficiency, providing a reliable technical solution for large-scale, high-density grating period measurement and adapting to diverse precision scenarios in semiconductor manufacturing and ultra-precision machining.