Polymer electrolyte membranes have found broad application in a number of processes, being fuel cells, due to energy concerns, the main focus of the scientific community worldwide.Relatively little attention has been paid to the use of these materials in electrochemical production and separation processes. In this review, we put emphasis upon the application of Nafion membranes in electrochemical membrane reactors for chlorine recycling. The performance of such electrochemical reactors can be influenced by a number of factors including the properties of the membrane, which play an important role in reactor optimization. This review discusses the role of Nafion as a membrane, as well as its importance in the catalyst layer for the formation of the so-called three-phase boundary. The influence of an equilibrated medium on the Nafion proton conductivity and Cl− crossover, as well as the influence of the catalyst ink dispersion medium on the Nafion/catalyst self-assembly and its importance for the formation of an ionic conducting network in the catalyst layer are summarized.
For the purpose of the intensification of an industrial-scale gas-liquid process, the implementation in an alternative reactor concept is investigated at Hamburg University of Technology (TUHH) in cooperation with Ehrfeld Mikrotechnik GmbH. Existing process operation data from a bubble column hint at a mass transfer limitation of the gas-liquid reaction. In the project, a jet loop reactor (JLR) is chosen to increase the specific interfacial area between gas and liquid, and thus increase mass transfer, while keeping the reactor system mechanically simple and low-maintenance. For the investigation, a laboratory scale reactor has been designed on the basis of an existing industrial scale process and scaled according to a pilot scale reactor available at TUHH. For scaling, geometric similarity is desired, while specific energy dissipation rate and volumetric gas input are kept constant for the chosen scale-up strategy. Between the two different scales, the reactors are successfully characterised in a water-air system with regards to the important mass transfer, among other parameters. A pressure- and chemical-resistant twin of the laboratory-scale reactor is provided to the project partner for trials under real process conditions with the original material system. The presented work shows that the JLR concept can be transferred sufficiently well between different scales when suitable parameters are chosen, and offers a wide operating window. The investigations aim to provide a basis for a future scale-up of the chemical process in the JLR system to the industrial scale.