Le Zh

Dr. Le Zh


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 June 2025 in Materials
Verified
Journal Article
Open access
PDF file
Mohamed RamadanMohamed Ramadan
Mohamed Ramadan
JJJinsheng Jia
Jinsheng Jia
LZLe Zh
Le Zh
XLXu LI
Xu LI
YWYangfeng Wu
Yangfeng Wu
High concrete gravity dams, particularly Roller-Compacted Concrete (RCC) types, face long-term safety challenges due to weak interlayer formation and crack propagation. This study presented a comprehensive evaluation of safety monitoring indexes for the Guxian high RCC dam (currently under construction) using both numerical and mathematical models. A finite element method (FEM) is employed with a strength reduction approach to assess dam stability considering weak layers. In parallel, a fracture mechanical model is used to investigate the safety of the Guxian dam based on failure assessment diagrams (FADs) for calculating the safety factor and the residual strength curve for calculating critical crack depth for two different crack locations, single-edge and center-through crack, to investigate the high possible risk associated with crack location on the dam safety. Additionally, the Guxian dam’s resistance to hydraulic fracture is assessed under two fracture mechanic failure modes, Mode I (open type) and Mode II (in-plane shear), by computing the ultimate overload coefficient using a proposed novel derived formula. The results show that weak layers reduce the dam’s safety index by approximately 20%, especially in lower sections with extensive interfaces. Single-edge cracks pose greater risk, decreasing the safety factor by 10% and reducing critical crack depth by 40% compared to center cracks. Mode II demonstrates higher resistance to hydraulic fracture due to greater shear strength and fracture energy, whereas Mode I represents the most critical failure scenario. The findings highlight the urgent need to incorporate weak layer behavior and hydraulic fracture mechanisms into dam safety monitoring, and to design regulations for high RCC gravity dams.

6 April 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JJJinsheng Jia
Jinsheng Jia
LDLianying Ding
Lianying Ding
YWYangfeng Wu
Yangfeng Wu
CZChun Zhao
Chun Zhao
LZLe Zh
Le Zh
In order to safely and efficiently use soft rock aggregate cemented dams in red bed regions and promote the development of widely sourced cemented sand and gravel dam materials, the Jinjigou project in China applied soft rock for the first time in the construction of cemented material dams. This article further explores the concept of cemented material dams from conducting on-site direct shear tests and research on soft rock material ratios and explores and invents a new structure and construction method by combining soft rock cemented sand and gravel with cemented rockfill. This article also proposes a digital mixing and intelligent dynamic control method for cemented material dams with soft rock. The research results show that soft rock aggregate content not exceeding 60% can produce soft rock cemented gravel with a compressive strength of no less than 6 MPa. The stress on the dam body is small and does not produce tensile stress. The dam body with added soft rock has certain shear-bearing capacity, with a shear friction coefficient of 0.99~1.10 MPa, cohesion of 0.26~0.53 MPa, and high residual strength, accounting for 60~80% of the peak strength. At the same time, the problems of large fluctuations in moisture content and the uneven grading of the soft rock and riverbed gravel mix during the mixing and production process, and the significant influence on safety caused by the large strength dispersion of the cemented sand and gravel, are resolved, ensuring the quality of soft rock cemented sand and gravel preparation. The successful application of soft rock cemented material dams in Jinjigou has achieved a breakthrough in key technologies for soft rock cemented dam construction in red bed regions, proving the feasibility of soft rock cemented material dam construction and having broad prospects for application and promotion.

4 July 2024 in Water
Verified
Journal Article
Open access
PDF file
Mohamed RamadanMohamed Ramadan
Mohamed Ramadan
JJJinsheng Jia
Jinsheng Jia
LZLe Zh
Le Zh
XLXu LI
Xu LI
YWYangfeng Wu
Yangfeng Wu
The widespread adoption of high concrete gravity dams in China and globally underscores the necessity for enhancing design processes to address potential risks, notably hydraulic fracture. This study delves into this urgency by scrutinizing common design regulations and investigating the impact of hydraulic fracture on high concrete gravity dams. A comparative analysis of design specifications from China, the USA, and Switzerland, employing the gravity method, elucidates distinctions, focusing on the Guxian dam. In addition, evaluation of standards with higher resistance to hydraulic fracture was conducted using the Finite Element Method (FEM) with XFEM (eXtended Finite Element Method), employing initial cracks with different depths at the dam heel ranging from 0.2 to 2 m. The vulnerability of the Guxian dam’s cross-section to safety risks prompts further inquiry into the dam’s resistance to hydraulic fracture. Therefore, high-pressure water splitting risks to the ultimate bearing capacity were examined through FEM simulation and theoretical calculations. FEM simulations assessed the dam’s ultimate bearing capacity with and without automatic crack propagation combining the XFEM and overloading methods, particularly considering weak layers in the RCC (Roller-Compacted Concrete) dams. Theoretical calculations utilized a fracture mechanical evaluation model. This model derived mechanism formulas to assess the dam’s resistance to hydraulic fracture. Additionally, the investigation explored the effect of the uplift pressure on the ultimate overload coefficient. Findings indicated that the Guxian dam’s current cross-sectional area was insufficiently safe against hydraulic fracture, necessitating an increase to its cross-sectional area to 18,888.1 m2. Notably, the USA’s and Switzerland’s criteria exhibited greater resistance to hydraulic fracture than the Chinese criteria, especially without considering uplift pressure. Also, the Chinese regulations tended to calculate a lower dam cross-sectional area compared with the other regulations. Numerical calculations revealed a substantial decrease in overall dam safety (up to 48%) when considering automatic crack propagation and the dam’s weak layers. The fracture mechanical evaluation model showed that the Guxian dam had the lowest resistance, with an overloading coefficient of 1.05 considering the uplift pressure. In the case of not considering the uplift pressure, the dam resistance to hydraulic fracture increased and the overloading coefficient rose to 1.27. The results highlighted the risk of hydraulic fracture in concrete dams. Hence, it is recommended that design specifications of high concrete gravity dams incorporate safety analyses of hydraulic fracture in the design process. Reducing uplift pressure plays a crucial role in enhancing the dam’s resistance to hydraulic fractures, emphasizing the need for this consideration in safety evaluations. The differences between the three design specifications were particularly pronounced for dams higher than 200 m. In contrast, dams of 50 m yielded similar results across these regulations.