This paper discusses the prediction of fatigue response of composites using an empirical strength and stiffness degradation scheme coupled to a cumulative damage accumulation approach. The cumulative damage accumulation approach is needed to account for the non-constant stress levels that arise due to stress distributions from stiffness degradation during the fatigue loading. Degradation of strength and stiffness during fatigue loading of the composite was implemented by following the empirical model presented by Shokrieh and Lessard with some modification and correction to the non-dimensional load parameter definition. The fatigue analysis was performed using ABAQUS™ finite element software using a user-defined material subroutine UMAT developed for the material response. Implementation results were first verified for unidirectional laminate test cases and validated by predicting stress versus life (S-N) curves for several laminate coupons test simulations and residual strengths of Open Hole Tension (OHT) specimens subjected to constant amplitude fatigue loading.
1 July 2009 in International Journal for Simulation and Multidisciplinary Design Optimization
Electrical resistance tomography (ERT) is a nondestructive evaluation technique that uses the internal conductivity variations of materials to assess structural integrity. Due to the low instrumentation required, the widespread use of ERT in the aerospace industry for monitoring the accumulation of damage in aircraft components can lead to significant reductions in inspections and maintenance costs. However, implementing the ERT method for mapping the damage state of structural components made of carbon fiber reinforced polymeric (CFRP) composites is challenging due to the inability of this method to distinguish between damage modes such as delamination and matrix cracking. This article explores the combined use of ERT and machine learning algorithms such as neural networks, random forests, k-nearest neighbors, and support vector machines to classify and characterize delamination and matrix cracking damage in CFRP laminates. Results show that the proposed classification algorithms can successfully estimate the damage severity of delaminated composites in the presence of matrix cracking. Similarly, the classification algorithms can characterize these independent damage modes with an accuracy of 95%. The algorithms showed robustness to predict the electrical resistance variations of damaged composites and characterize delamination and matrix cracking damage even when intrinsic noise was considered. Although neural networks characterized damage with the highest accuracy, these algorithms were also the most sensitive to noise. For applications where instrumentation noise cannot be completely removed from the ERT signals, the use of nearest neighbors is thus recommended.
For polymer matrix composites subjected to large strain rates, it is important to correctly characterize the nonlinear and strain-rate dependent response of polymers. Viscoplastic constitutive material models have been developed to account for the effects of hydrostatic effects and inelastic strains in polymer materials. The effective implementation of such viscoplastic models is important for development of composite models geared toward practical applications. Goldberg’s polymer model numerical implementation into a commercial finite-element code constitutes the main objective of this paper. Special attention is given to the use of effective algorithms for solving the model nonlinear rate dependent viscoplastic equations. Existent experimental data are used to verify the accuracy and robustness of the computational polymer model. A phenomenological fiber model and a simplified iso-strain mixture theory used to obtain the resultant stresses in the composite by averaging the stresses of the individual constituents are also defined. The validation of the simplified mixture theory for the composite model will be presented later on.
Electrical Resistance Tomography (ERT) offers a non-destructive evaluation (NDE) technique that takes advantage of the inherent electrical properties in carbon fiber reinforced polymer (CFRP) composites for internal damage characterization. This paper investigates a method of optimum selection of sensing configurations for delamination detection in thick cross-ply laminates using ERT. Reduction in the number of sensing locations and measurements is necessary to minimize hardware and computational effort. The present work explores the use of an effective independence (EI) measure originally proposed for sensor location optimization in experimental vibration modal analysis. The EI measure is used for selecting the minimum set of resistance measurements among all possible combinations resulting from selecting sensing electrode pairs. Singular Value Decomposition (SVD) is applied to obtain a spectral representation of the resistance measurements in the laminate for subsequent EI based reduction to take place. The electrical potential field in a CFRP laminate is calculated using finite element analysis (FEA) applied on models for two different laminate layouts considering a set of specified delamination sizes and locations with two different sensing arrangements. The effectiveness of the EI measure in eliminating redundant electrode pairs is demonstrated by performing inverse identification of damage using the full set and the reduced set of resistance measurements. This investigation shows that the EI measure is effective for optimally selecting the electrode pairs needed for resistance measurements in ERT based damage detection.
20 February 2011 in Structural and Multidisciplinary Optimization