Evaporation of liquids from porous media plays a significant role in both natural and industrial applications. Evaporation is influenced by various factors, including porous structure, wettability, and thermal gradients, making it difficult to understand the underlying mechanisms and therefore manipulate the evaporation process. In the present study, a hybrid model combing the pseudopotential multiphase lattice Boltzmann method for the fluid field and a finite-difference solver for the energy equation is used to study the evaporation of porous media considering conjugate heat transfer. The flow field and temperature field are coupled via the Peng–Robinson equation of state, while the cascaded lattice Boltzmannn collision operator is employed to enhance the numerical stability. To account for contact angle effects, a validated geometric formulation scheme is applied. The model is utilized to investigate fluid flow and phase distribution in a porous material during evaporation occurring from the top boundary open to the environment and a constant heat flux (q) imposed at the bottom to provide energy input. In the absence of applied heat flux, the evaporation patterns with and without considering conjugate heat transfer are similar, though the latter yields a higher evaporation rate. The underlying mechanism is elucidated by analyzing the temperature field and energy budget. In contrast, thermal input (q ≠ 0) affects the evaporation rate when the heat-affected region reaches the evaporation front. Moreover, high heat input eventually dries out the bottom of the porous media, altering the evaporation dynamics. Regarding contact angle, a smaller contact angle strengthens capillary pumping from large pores to small pores, causing the evaporation front to extend into the small-pore region after the large-pore region is completely dried out. Due to the Kelvin effect, a larger contact angle results in higher vapor pressure near the liquid-vapor interface, promoting evaporation. This study explores the characteristics of the evaporation process in porous media and provides insights into the underlying mechanisms.
Atomization and sprays are widely used in industry and agriculture. An appropriate atomization simulation method is essential in analyzing the liquid film-breaking process and atomization performance, especially in large-scale atomization field calculations. This study innovatively proposes a portioned method that combines existing fundamental atomization calculation models to balance computational accuracy and speed, finally achieving a full-scale numerical study of large atomization fields. This study employs the volume of fluid (VOF) model to measure the two-phase flow in the inner flow field and applies the discrete particle model (DPM) to analyze droplet behavior in the far-atomization field. In the near-atomization field, the VOF-to-DPM method connects the nozzle with the jet space, providing an effective numerical simulation of the liquid film formation and droplet breakup processes. Additionally, experiments on atomization using a pressure-swirl nozzle at different flow rates were conducted. Experimental data, such as atomization cone angle, flow distribution, and droplet particle size distribution, were obtained, and numerical calculations were performed using the large atomization field partitioned calculation model. The simulation results are utilized to explain the mechanisms of liquid film disintegration, while the experimental results are employed to validate the accuracy of the numerical model. The comparison revealed that the calculated results of the partitioned simulation approach align well with the experimental data. The maximum error in flow characteristics is 9.53%, in atomization cone angle is 6.16%, and in flow distribution is 3.67%, and there is a good agreement in particle size distribution with a maximum error of 17.58% in Sauter mean diameter, validating the accuracy of the portioned calculation method for large atomization fields.
The droplets' impact on a liquid surface is widespread in daily life and industrial applications. A high-fidelity and efficient numerical method is necessary for the droplets' impact on a liquid surface during the spray process. This study introduces a novel integrated VOF-to-DPM-to-VOF (Volume of Fluid-to-Discrete Particle Model-to-Volume of Fluid, VtDtV) method by combining spray breakup and droplet impact modeling through the VTD (VOF-to-DPM) and DTV (DPM-to-VOF) approaches, enabling accurate model transition within the computational domain and achieving precise simulation of droplet impacts on a free liquid surface in large-scale fields. Different simulation models are employed in different regions/stages to balance computational efficiency and accuracy. The VTD method is used to capture the liquid film breakup process, while the DTV method is used to analyze the details of droplet impact, and DPM serves as a bridge for transitions over large spaces. Finally, in contrast to most previous works that primarily focus on energy transfer during the vertical impact, this study completes the analysis of droplets impacting the liquid surface during the spray process, discussing the morphology and energy involved in both single and multiple droplets oblique impacting on the free liquid surface and predicting the size of the cavity. The results show that the prediction formula for the maximum cavity depth of the single droplet oblique impact model has an error of 14.71%, and the maximum error for the impact of multiple consecutive droplets is 4.61%, verifying the accuracy of both the simulation method and the analysis model.