Feng Cheng

Dr. Feng Cheng

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 August 2018 in Catalysts
Verified
Journal Article
Open access
PDF file
FCFeng Cheng
Feng Cheng
Xiuwei LiXiuwei Li
Xiuwei Li
Firstly, this paper reviews two main methods for biochar synthesis, namely conventional pyrolysis and hydrothermal carbonization (HTC). The related processes are described, and the influences of biomass nature and reaction conditions, especially temperature, are discussed. Compared to pyrolysis, HTC has advantages for processing high-moisture biomass and producing spherical biochar particles. Secondly, typical features of biochar in comparison with other carbonaceous materials are summarized. They refer to the presence of inorganics, surface functional groups, and local crystalline structures made up of highly conjugated aromatic sheets. Thirdly, various strategies for biochar modification are illustrated. They include activation, surface functionalization, in situ heteroatom doping, and the formation of composites with other materials. An appropriate modification is necessary for biochar used as a catalyst. Fourthly, the applications of biochar-based catalysts in three important processes of biofuel production are reviewed. Sulfonated biochar shows good catalytic performance for biomass hydrolysis and biodiesel production. Biodiesel production can also be catalyzed by biochar-derived or -supported solid-alkali catalysts. Biochar alone and biochar-supported metals are potential catalysts for tar reduction during or after biomass gasification. Lastly, the merits of biochar-based catalysts are summarized. Biochar-based catalysts have great developmental prospects. Future work needs to focus on the study of mechanism and process design.

13 April 2017 in Catalysts
Verified
Journal Article
Open access
PDF file
FCFeng Cheng
Feng Cheng
Valerie DupontValerie Dupont
Valerie Dupont
As an extension of chemical looping combustion, chemical looping steam reforming (CLSR) has been developed for H2 production. During CLSR, a steam reforming (SR) process occurs following the reduction of catalysts by the reforming feedstock itself (termed “auto-reduction”), as opposed to a separate, dedicated reducing agent like H2. This paper studied SR performances of four common bio-compounds (ethanol, acetone, furfural, and glucose) with a nickel catalyst that had undergone auto-reduction. A packed bed reactor was used to carry out the experiment of auto-reduction and subsequent SR. The effects of temperature and steam to carbon ratio (S/C) on the carbon conversions of the bio-compounds to gases and yields of gaseous products were investigated. The carbon deposition on spent catalysts was characterized by CHN elemental analysis and Scanning Electron Microscopy-Energy Dispersive X-ray Spectroscopy (SEM-EDX). The SR performance with the auto-reduced catalyst was close to that with the H2-reduced catalyst. In general, an increase in temperature or S/C would lead to an increase in H2 yields. The dependence of SR performance on temperature or S/C was specific to the type of bio-compounds. Accordingly, the main bottlenecks for SR of each bio-compound were summarized. A large amount of CH4 existed in the reforming product of ethanol. Severe carbon deposition was observed for SR of acetone at temperatures below 650 °C. A high thermal stability of furfural molecules or its derivatives restricted the SR of furfural. For SR of glucose, the main problem was the severe agglomeration of catalyst particles due to glucose coking.

21 May 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
FCFeng Cheng
Feng Cheng
Xiuwei LiXiuwei Li
Xiuwei Li
Co-doped and Ni-doped hematite (α-Fe2O3) nanorod arrays were prepared on fluorine-doped tin oxide (FTO) conductive glass via aqueous chemical growth, in which the doping and the formation of nanorods occurred simultaneously (i.e., in situ doping). These samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet (UV)–visible spectrophotometry, linear sweep voltammetry and Mott–Schottky (M–S) measurement. Results showed that the introduction of 5% Co or Ni into α-Fe2O3 (the molar ratio of dopant to Fe is 1:20) did not change its crystal phase, morphology, energy gap and flat band potential. Both the undoped and the doped α-Fe2O3 showed a direct band gap of 2.24 eV, an indirect band gap of 1.85 eV, and a flat band potential of −0.22 V vs. saturated calomel electrode (SCE). At an applied potential of 0.2 V vs. SCE, the Co-doped and the Ni-doped α-Fe2O3 exhibited a photocurrent of 1.28 mA/cm2 and 0.79 mA/cm2, respectively, which were 2.1 times and 1.3 times that of the undoped α-Fe2O3. After the Co or Ni doping, the charge carrier concentration increased from 1.65 × 1025 m−3 to 3.74 × 1025 m−3 and 2.50 × 1025 m−3, respectively. Therefore, the increase in the photocurrent of the doped α-Fe2O3 was likely attributed to their enhanced conductivity.

5 August 2022 in Processes
Verified
Journal Article
Open access
PDF file
FCFeng Cheng
Feng Cheng
XLXiuwei Li
Xiuwei Li
The reduction of metal oxides by biochar is an important reaction for many biomass utilization technologies. This work investigated the temperature–programmed reduction (TPR) of NiO/Al2O3 by in situ generated biochar from citric acid pyrolysis. Firstly, NiO/Al2O3 was loaded with citric acid by impregnation and then heated from ambient temperature to 900 °C in a N2 flow. The process was on–line analyzed by the TGA–FTIR technique. Secondly, a series of intermediates was obtained and characterized by XRD, CHNO elemental analysis, and temperature programmed oxidation (TPO). Lastly, a control experiment of unsupported NiO was conducted to show the influence of Al2O3 support on the NiO reduction. Results showed that the whole heating process could be resolved into two parts that is citric acid pyrolysis and NiO reduction at a heating rate of 5 °C/min. The NiO reduction occurred above 400 °C with the biochar from citric acid pyrolysis as reductant. In the temperature–programmed reduction process, the Al2O3–supported NiO exhibited three reduction phases in contrast with only one reduction phase for the unsupported NiO. A hypothesis was proposed to explain this. The presence of Al2O3 support may result in different deposition sites of biochar (on NiO or on Al2O3), and consequently different reduction mechanisms.

1 November 2017 in Procedia Engineering
Verified
Journal Article
Open access
PDF file
BDBoqing Ding
Boqing Ding
FCFeng Cheng
Feng Cheng
Xiuwei LiXiuwei Li
Xiuwei Li
The air-conditioning system, a huge energy consumer, must be more energy conservative and environment friendly for greener buildings. Absorption air-conditioning system is an idea option except for its low performance caused by the thermal regeneration method. That can be improved with the membrane regeneration based on electrodialysis method. However, single-stage membrane regeneration is unstable and inefficient when the concentration difference is high. Double-stage membrane system can solve the problem. Theoretical and experimental work has been done about double-stage system: Models have been developed based on the mass and energy balance equations. Analysis has been made on some influential parameters. Experiments have been conducted to test the true regeneration performance. It has revealed the influences of the solute concentration, voltages and the transferred solute mass. The experimental results show double-stage system could be a better choice as the concentration difference decreases in regenerators. Under some conditions, the maximum coefficient of performance (COP) of double-stage system can as high as 3.

1 March 2021 in Processes
Verified
Journal Article
Open access
PDF file
FCFeng Cheng
Feng Cheng
YWYunlei Wu
Yunlei Wu
Xiuwei LiXiuwei Li
Xiuwei Li
Absorption air-conditioning systems have a great advantage in terms of energy conservation and environmental protection. However, the large amount of energy waste in the thermal regeneration process leads to lower efficiency and impedes its development. To reduce energy loss and improve performance, a local heating regeneration method is proposed in this paper. The main principle is reducing the volume of the liquid participating regeneration. Including the solar steam mode, two modes are introduced and configured. Theoretical and experimental research has been made on the new methods. Models have been developed for comparison analysis. Experiments have been conducted on water and absorbent solution with different modes. Performance has been evaluated based on the experimental data. The results expose the influence of different parameters, like liquid volume and solution concentration, on the regeneration process. The local heating method improved the regeneration efficiency by 40% in the no solar steam mode and the performance tripled in the solar steam mode. The COP (the ratio of cooling load to energy consumption) of the absorption system with the solar steam mode is more than two times of that with the traditional regeneration mode. It shows the local heating regeneration method has good potential in future application.