The mechanical properties of carbon fiber-reinforced epoxy composites were identified by adding carbon-based nano-reinforcements, such as multi-wall carbon nanotubes (CNTs) and graphene platelets (GP), into the epoxy matrix by conducting suitable experiments. The main focus of this study is to compare the tensile modulus, tensile strength, flexural modulus, flexural strength, and thermal conductivity of carbon fiber-reinforced epoxy composites with nanoparticle reinforcement. The results revealed that adding CNTs and GP nanoparticles improved the mechanical properties compared to a pure carbon fiber-reinforced plastic composite. However, compared to CNTs, the GP’s addition has increased the mechanical properties of the CFRP composite. In addition, scanning electron microscopy (SEM) images were presented to explore the microstructural characterization of carbon fiber-reinforced nanoparticle-reinforced composites. Further, using numerical studies, the transverse modulus, major and minor Poisson’s ratio of the carbon fibre reinforced with CNT and GP particle reinforcement were estimated. The current study is applied to the efficient design of nanoparticle reinforced carbon fibre reinforced composites.
A two-stage micromechanics technique is used to predict the elastic modulus, as well as the major and minor Poisson’s ratio of unidirectional natural fiber (NF) reinforced composites. The actual NF microstructure consists of cellulose, hemicellulose, lignin, lumen, etc., and these constituents and their contributions are neglected in classical models while quantifying their mechanical properties. The present paper addresses the effect of the real microstructure of the natural jute fiber (JF) by applying a micromechanics approach with the Finite Element Method. Six different hierarchically micro-structured JFs are considered to quantify the JF elastic properties in the first level of homogenization. Later, the JF reinforced polypropylene matrix properties are investigated in the second stage by adopting a homogenization approach. Taking into account the different hierarchical structures (HS), the fiber direction modulus (E1), transverse modulus (E2 and E3), in-plane and out-of-plane shear modulus (G12 and G23), and major (ν12, ν13) and minor (ν23, ν21) Poisson’s ratios are estimated for JF and JF reinforced polypropylene composites. The predicted elastic modulus from micromechanics models is validated against the analytical results and experimental predictions. From the present work, it is observed that the HS of NF needs to be considered while addressing the elastic properties of the NF-reinforced composite for their effective design, particularly at a higher volume fraction of NF.
1 January 2024 in Innovation and Emerging Technologies
The MHD convective Walters-B memory liquid flow past a permeable accelerating surface with the mechanism of Soret-Dufour is considered. The flow equation constitutes a set of partial differential equations (PDEs) to elucidate the real flow of a non-Newtonian liquid. The radiation thermo-physical parameters were employed based on the use of Roseland approximation. This implies the fluid employed in this exploration is optically thick. Utilizing suitable similarity terms, the flow equation PDEs were simplified to become total differential equations. The spectral homotopy analysis method (SHAM) was utilized to provide outcomes to the model. The SHAM involves the addition of the Chebyshev pseudospectral approach (CPM) alongside the homotopy analysis approach (HAM). The outcomes were depicted utilizing graphs and tables for the quantities of engineering concern. The mechanisms of Soret and Dufour were separately examined. The imposed magnetism was found to lessen the velocity plot while the thermal radiation term elevates the temperature plot because of the warm particles of the fluid.
1 January 2024 in Innovation and Emerging Technologies
The Journal retracts the article, “Dynamics of MHD Convection of Walters B Viscoelastic Fluid through an Accelerating Permeable Surface Using the Soret–Dufour Mechanism”