The mechanical properties of carbon fiber-reinforced epoxy composites were identified by adding carbon-based nano-reinforcements, such as multi-wall carbon nanotubes (CNTs) and graphene platelets (GP), into the epoxy matrix by conducting suitable experiments. The main focus of this study is to compare the tensile modulus, tensile strength, flexural modulus, flexural strength, and thermal conductivity of carbon fiber-reinforced epoxy composites with nanoparticle reinforcement. The results revealed that adding CNTs and GP nanoparticles improved the mechanical properties compared to a pure carbon fiber-reinforced plastic composite. However, compared to CNTs, the GP’s addition has increased the mechanical properties of the CFRP composite. In addition, scanning electron microscopy (SEM) images were presented to explore the microstructural characterization of carbon fiber-reinforced nanoparticle-reinforced composites. Further, using numerical studies, the transverse modulus, major and minor Poisson’s ratio of the carbon fibre reinforced with CNT and GP particle reinforcement were estimated. The current study is applied to the efficient design of nanoparticle reinforced carbon fibre reinforced composites.
Raising awareness of energy balance to minimize the global warming and usage of eco-friendly material has encouraged many researchers to replace synthetic materials with natural resources. Natural fibers are the alternative to man-made fibers to produce many structural parts in automotive, marine and aircraft. In the present work, sisal fiber is selected to prepare a natural composite. Sisal fiber waviness effect on the elastic properties such as longitudinal modulus (E1), transverse modulus (E2), shear modulus (G12 and G23), major (μ12) and minor Poisson’s ratio (μ21) are identified by considering different wavy patterns of half-sine waviness, full sine waviness and combination of half-sine and full sine wavy natural sisal fiber (Mixed waviness). The objective of the present work is achieved by conducting suitable experiments and numerical simulations. The influence of the waviness ratio (A/λ) on the same properties is identified with the Micromechanics approach. The influence of mixed waviness of sisal fiber on the elastic properties is identified with experimental as well as Micro and Macromechanics principles. It is observed that the waviness of the fiber has a significant effect on the composite modulus in all directions.
A two-stage micromechanics technique is used to predict the elastic modulus, as well as the major and minor Poisson’s ratio of unidirectional natural fiber (NF) reinforced composites. The actual NF microstructure consists of cellulose, hemicellulose, lignin, lumen, etc., and these constituents and their contributions are neglected in classical models while quantifying their mechanical properties. The present paper addresses the effect of the real microstructure of the natural jute fiber (JF) by applying a micromechanics approach with the Finite Element Method. Six different hierarchically micro-structured JFs are considered to quantify the JF elastic properties in the first level of homogenization. Later, the JF reinforced polypropylene matrix properties are investigated in the second stage by adopting a homogenization approach. Taking into account the different hierarchical structures (HS), the fiber direction modulus (E1), transverse modulus (E2 and E3), in-plane and out-of-plane shear modulus (G12 and G23), and major (ν12, ν13) and minor (ν23, ν21) Poisson’s ratios are estimated for JF and JF reinforced polypropylene composites. The predicted elastic modulus from micromechanics models is validated against the analytical results and experimental predictions. From the present work, it is observed that the HS of NF needs to be considered while addressing the elastic properties of the NF-reinforced composite for their effective design, particularly at a higher volume fraction of NF.
14 May 2022 in Journal of the Brazilian Society of Mechanical Sciences and Engineering