Forests offer significant climate mitigation benefits, but existing emissions reduction assessment methodologies in forest-based mitigation activities are not scalable, which limits the development of carbon offset markets. In this study, we propose a measurement method using optical satellite imagery and space LiDAR data fusion to assess forest emissions reduction. Compared with the ALS-based carbon stock density estimation method, our approach presented a strong scalability for mapping 10 m-resolution carbon stock at a large scale. It was observed that dense canopy top height estimated by combining GEDI and Sentinel-2 could accurately predict forest carbon stock measurements estimated by the ALS-based method ($R^2$ = 0.72). By conducting an on-site experiment of an ongoing forest carbon project in China, we found the consistency between the emissions reduction assessed by the data fusion measurement method (589,169 ${\mathrm{tCO}}_2\mathrm{e}$) and the official ex post-monitored emissions reduction in the monitoring report (598,442 ${\mathrm{tCO}}_2\mathrm{e}$). Our results demonstrated that forest carton stock estimation using optical satellite imagery and space LiDAR data fusion is efficient and economical for forest emissions reduction assessment. The acquisition of the data was more efficient over large areas with high frequencies using space-based technology. We further discussed the challenge of building a near-real-time monitoring system for forest-based mitigation activities by utilizing optical satellite imagery and space LiDAR data and pointed out that a quality control framework should be established to help us understand the sources of uncertainty in LiDAR-based models and improve carbon stock estimation from individual trees to forest carbon projects to meet the requirements of carbon standards better.

Accurate monitoring of bare soil land (BSL) is an urgent need for environmental governance and optimal utilization of land resources. High-resolution imagery contains rich semantic information, which is beneficial for the recognition of objects on the ground. Simultaneously, it is susceptible to the impact of its background. We propose a semantic segmentation model, Deeplabv3+-M-CBAM, for extracting BSL. First, we replaced the Xception of Deeplabv3+ with MobileNetV2 as the backbone network to reduce the number of parameters. Second, to distinguish BSL from the background, we employed the convolutional block attention module (CBAM) via a combination of channel attention and spatial attention. For model training, we built a BSL dataset based on BJ-2 satellite images. The test result for the F1 of the model was 88.42%. Compared with Deeplabv3+, the classification accuracy improved by 8.52%, and the segmentation speed was 2.34 times faster. In addition, compared with the visual interpretation, the extraction speed improved by 11.5 times. In order to verify the transferable performance of the model, Jilin-1GXA images were used for the transfer test, and the extraction accuracies for F1, IoU, recall and precision were 86.07%, 87.88%, 87.00% and 95.80%, respectively. All of these experiments show that Deeplabv3+-M-CBAM achieved efficient and accurate extraction results and a well transferable performance for BSL. The methodology proposed in this study exhibits its application value for the refinement of environmental governance and the surveillance of land use.

Different light spectra from light-emitting diodes (LEDs) trigger species-specific adaptive responses in plants. We exposed Artemisia argyi (A. argyi) to four LED spectra: white (the control group), monochromatic red light (R), monochromatic blue light (B), or a mixture of R and B light of photon flux density ratio is 3 (RB), with equivalent photoperiod (14 h) and light intensity (160 μmol s⁻¹ m⁻²). R light accelerated photomorphogenesis but decreased biomass, while B light significantly increased leaf area and short-term exposure (7 days) to B light increased total phenols and flavonoids. HPLC identified chlorogenic acid, 3,5-dicaffeoylquinic acid, gallic acid, jaceosidin, eupatilin, and taxol compounds, with RB and R light significantly accumulating chlorogenic acid, 3,5-dicaffeoylquinic acid, and gallic acid, and B light promoting jaceosidin, eupatilin, and taxol. OJIP measurements showed that B light had the least effect on the effective quantum yield ΦPSII, with higher rETR(II), Fv/Fm, qL and PIabs, followed by RB light. R light led to faster photomorphology but lower biomass than RB and B lights and produced the most inadaptability, as shown by reduced ΦPSII and enlarged ΦNPQ and ΦNO. Overall, short-term B light promoted secondary metabolite production while maintaining effective quantum yield and less energy dissipation.

The water use efficiency (WUE) is an essential indicator of carbon–water coupling between terrestrial ecosystems and the atmosphere, and it is an important parameter for studying ecosystem responses to global climate change. A comprehensive understanding of the water–carbon coupling process in the Loess Plateau can reflect the balance between the “carbon absorption” and “water consumption” in vegetation, which drives the ecosystem succession process. In recent years, scholars have gained a more comprehensive understanding of the WUE and the driving factors of the Loess Plateau. However, there is still a need to study the carbon and water coupling mechanisms of different land use types in the Loess Plateau region. In this article, based on the gross primary productivity (GPP), evapotranspiration (ET), surface cover remote sensing products, and meteorological observation data, the trend of WUE changes for different vegetation types in the Loess Plateau from 2001 to 2020 and the correlations with the Normalized Difference Vegetation Index (NDVI), precipitation, and temperature values were analyzed using the Theil–Sen median (SEN) trend analysis method and correlation coefficient analysis method. The spatial distribution patterns of the changes with the drought index showed that the multi-year average WUE value of the Loess Plateau was 1.24 g C mm⁻¹ H₂O, and the mean WUE values in different seasons were ranked as follows: summer > autumn > spring. The WUE growth rates of all vegetation types showed a decreasing trend with the increase in drought index, and the size of the WUE response rate for each vegetation type to drought was ranked as follows: grassland > forest > shrub > crop. The annual average WUE increase rate of the Loess Plateau was 0.02 g C mm⁻¹ H₂O yr⁻¹, of which 93.36% of the area showed an increasing trend. The NDVI was the dominant factor affecting the spatial and temporal variations in WUE rates in the Loess Plateau, and the correlation between the NDVI and WUE was strongest in summer. In the more arid regional ecosystems, the WUE was negatively correlated with the precipitation and temperature, but in summer the precipitation had a positive effect on the WUE. The correlation of grassland and shrub WUE rates with temperature was more sensitive to the drought index than that of the forest and crop areas, but there was also a threshold effect. Therefore, when vegetation restoration is carried out in arid and semi-arid regions, the carbon and water coupling mechanisms of different vegetation types and the reasonable allocation of regional water resources should be fully considered.

The Grain for Green Project (GGP) has considerably improved the vegetation cover of the Loess Plateau, as well as changed the carbon and water coupling process of local vegetation to a certain extent. Water use efficiency (WUE) is a crucial measure for evaluating ecosystem responses to global climate change and is a key indicator of the carbon–water coupling between terrestrial ecosystems and the environment. A comprehensive understanding of the impact of vegetation reconstruction on WUE on the Loess Plateau is of great significance to the vegetation growth and contribution to sustainable of the Loess Plateau. In recent years, scholars have gained a more comprehensive understanding of the distribution and drivers of WUE on the Loess Plateau. However, through the study of carbon and water coupling in the Loess Plateau, it is found that the effects of different vegetation restoration levels on WUE are still to be studied in depth in terms of spatial and temporal heterogeneity and long timeseries. In this paper, we analyzed the trends of Normalized Difference vegetation cover (NDVI) and WUE from 2001 to 2010 and 2011 to 2020, respectively, to research at the WUE of the vegetation in this area in relation to vegetation restoration. It was found that the Loess Plateau’s vegetation WUE rose from 2001 to 2020 at a rate of 0.023 g C kg⁻¹ H₂O per year, and that the increase from 2011 to 2020 was more significant than the growth from 2000 to 2010. The Loess Plateau’s area with a growing trend in vegetation water use rate increased from 77.12% in 2001–2010 to 88.63% in 2011–2020, with the majority of the increased area occurring in the northeastern Inner Mongolia region. After 20 years of the reforestation project, the area where NDVI and WUE increased simultaneously accounted for 71.54% of the Loess Plateau, the area where NDVI increased but WUE decreased accounted for 10.95% of the Loess Plateau, and the area where NDVI increased but WUE decreased accounted for 7.15% of the Loess Plateau. The correlation between temperature precipitation and WUE was not significant for the whole Loess Plateau, further indicating that the increase in vegetation cover was the main reason for the increase in vegetation water efficiency. Therefore, the effect of vegetation cover on WUE should be fully considered when vegetation restoration is carried out on the Loess Plateau.

With the current spatial planning reform in China, public participation is becoming increasingly important in the success of rural spatial planning. However, engaging various stakeholders in spatial planning projects is difficult, mainly due to the lack of planning knowledge and computer skills. Therefore, this paper discusses the development of a virtual globe-based 3D participatory geographic information system (PGIS) aiming to support public participation in the spatial planning process. The 3D PGIS-based rural planning approach was applied in the village of XiaFan, Ningbo, China. The results demonstrate that locals’ participation capacity was highly promoted, with their interest in 3D PGIS visualization being highly activated. The interactive landscape design tools allow stakeholders to present their own suggestions and designs, just like playing a computer game, thus improving their interactive planning abilities on-site. The scientific analysis tools allow planners to analyze and evaluate planning scenarios in different disciplines in real-time to quickly respond to suggestions from participants on-site. Functions and tools such as data management, marking, and highlighting were found to be useful for smoothing the interactions among planners and participants. In conclusion, virtual globe-based 3D PGIS highly supports the participatory rural landscape planning process and is potentially applicable to other regions.