In this study, present level of 2.0L GDI vehicle is measured and it is figured out how to reduce particle emissions against European emission limit(EURO 6) and US emissions standards(LEV 3) through engine test and vehicle test.A cause of PM and PN formation is divided into several reasons. This paper describes the optimization of engine control parameter and hardware change like injector type and injection target position like spray pattern optimization with minimizing side effect. If particle emission limit is getting more strengthen GPF(Gasoline Particle Filter) is a simple solution to meet particle emission limit. But engine performance decreases according to exhaust pressure increase and there is cost problem.This paper have shown that 60% level of euro6c PN limit is accomplished without a GPF at demonstrated vehicle.
Carbon/carbon (C/C) composite materials are widely used in aerospace structures operating in high temperature environments based on their high performance thermal and mechanical properties. The C/C composite material has a yarn architecture in which fiber bundles in different directions cross each other, and it is also divided into architecture types, such as 3-D orthogonal, 4-D in-plane, and 4-D diagonal, according to the arrangement of the fiber bundles. The thermo-mechanical performance of the carbon/carbon composite material may vary depending on the yarn architecture, and the material properties are also tailored according to constituent materials, such as fiber and matrix, and manufacturing parameters, such as yarn size, yarn spacing, and fiber volume fraction. In this paper, three types of geometric models are defined for repeating unit cells (RUCs), according to the yarn architecture of the C/C composite material, and the effective stiffness was predicted by applying the iso-strain assumption and stress averaging technique. In addition, the thermo-mechanical characteristics according to the yarn architecture and fiber volume fraction of RUC were compared and evaluated.
5 July 2018 in International Journal of Aeronautical and Space Sciences