Jongsu Kim

Prof. Dr. Jongsu Kim

Korea Maritime and Ocean University

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
Byongug JeongByongug Jeong
Byongug Jeong
Hyeon Min JeonHyeon Min Jeon
Hyeon Min Jeon
SKSeongWan Kim
SeongWan Kim
Jongsu KimJongsu Kim
Jongsu Kim
Peilin ZhouPeilin Zhou
Peilin Zhou
The paper aims to investigate the holistic environmental benefits of using a battery system on a roll on/roll off (ro-ro) passenger ship which was originally fitted with a diesel engine engaged in Korean coastal service. The process of this research has multiple layers. First, the operating profiles of the case ship were collected, such as speed, output, operation time and the configuration of the diesel propulsion system. Second, the full battery propulsion system, in place of the diesel system, was modelled and simulated on a power simulation software (PSIM) platform to verify the adequacy of the proposed battery propulsion system. Then, the life cycle assessment method was applied to comprehensively compare the environmental footprint of the diesel-mechanical and fully battery-powered vessels. A focus was placed on the life cycle of the energy sources consumed by the case ship in consideration of the South Korea’s current energy importation and production status. Three life cycle stages were considered in the analysis: ‘production’, ‘transport’ and ‘use’. With the aid of Sphera GaBi Software Version 2019 and its extensive data library, the environmental impacts at the energy production and transport stages were evaluated, while the same impacts at the use stage were determined based on actual laboratory measurements. The environmental performance of the two scenarios in four impact categories was discussed: global warming potential (GWP), acidification potential (AP), eutrophication potential (EP) and photochemical ozone creation potential (POCP). Results of the comparative analysis are presented based on estimates of the overall reduction in the environmental impact potential, thereby demonstrating the overall benefits of using a battery driven propulsion, with a decrease of the GWP by 35.7%, the AP by 77.6%, the EP by 87.8% and the POCP by 77.2%. A series of sensitivity analyses, however, has delivered the important message that the integration of batteries with marine transportation means may not always be the best solution. The types of energy sources used for electricity generation will be a key factor in determining whether the battery technology can ultimately contribute to cleaner shipping or not. By casting doubts on the benefits of battery propulsion, this paper is believed to offer a meaningful insight into developing a proper road map for electrifying ship propulsion toward zero emission of shipping.

8 April 2013 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
PDF file
Jongsu KimJongsu Kim
Jongsu Kim
YKYONGHA KIM
YONGHA KIM
SJSangYoul Jun
SangYoul Jun
KLKang Hun Lee
Kang Hun Lee
SRSeungHyun Rew
SeungHyun Rew
SPSimsoo Park
Simsoo Park
In this study, present level of 2.0L GDI vehicle is measured and it is figured out how to reduce particle emissions against European emission limit(EURO 6) and US emissions standards(LEV 3) through engine test and vehicle test.A cause of PM and PN formation is divided into several reasons. This paper describes the optimization of engine control parameter and hardware change like injector type and injection target position like spray pattern optimization with minimizing side effect. If particle emission limit is getting more strengthen GPF(Gasoline Particle Filter) is a simple solution to meet particle emission limit. But engine performance decreases according to exhaust pressure increase and there is cost problem.This paper have shown that 60% level of euro6c PN limit is accomplished without a GPF at demonstrated vehicle.

Verified
Journal Article
Open access
PDF file
SKSeongWan Kim
SeongWan Kim
Jongsu KimJongsu Kim
Jongsu Kim
This paper introduces an optimal energy control method whose rule-based control employs the equivalent consumption minimization strategy as the design standard to support a neural network technique. Using the proposed control method, the output command values for each power source based on the load of the ship and the state of charge of the battery satisfy the target of energy optimization. Based on the rules, the load of the ship and the state of charge of the battery were the input in the neural network, and the outputs of two generators were recorded as the output values of the neural network. To optimize the weights of the neural network and reduce the error between the predicted values and results, the Bayesian regularization method was employed, and a single hidden layer with 20 nodes, 2 input layers, and 2 output layers were considered. For the hidden layer, the tansigmoid function was applied, and for the activation functions of the output layers, linear functions were adopted considering the correlation between the input and output data used for training the neural network. The propulsion motor was fitted with a speed controller to ensure a stable speed, and a torque load was applied on the propulsion motor. To verify the accuracy of the neural network learning, a generator–battery hybrid system simulation was conducted using MATLAB Simulink, and the neural network learned values were compared with the generator output command values obtained based on the load of the ship and the battery state of charge. Additionally, it was confirmed that the generator command values were consistent with the neural network learned values, and the stability of the system was maintained by controlling the speed, voltage, and current control of the propulsion motor under various loads of the ship and different battery charge statuses.

Verified
Journal Article
Open access
PDF file
Hyeon Min JeonHyeon Min Jeon
Hyeon Min Jeon
KPKido Park
Kido Park
Jongsu KimJongsu Kim
Jongsu Kim
In order to secure the safe operation of the ship, it is crucial to closely examine the suitability from the design stage of the ship, and to set up a preliminary review and countermeasures for failures and defects that may occur during the construction process. In shipyards, the failure mode and effects analysis (FMEA) evaluation method using risk priority number (RPN) is used in the shipbuilding process. In the case of the conventional RPN method, evaluation items and criteria are ambiguous, and subjective factors such as evaluator’s experience and understanding of the system operate a lot on the same contents, resulting in differences in evaluation results. Therefore, this study aims to evaluate the safety and reliability for ship application of the reliability-enhanced fuel cell-based hybrid power system by applying the re-established FMEA technique. Experts formed an FMEA team to redefine reliable assessment criteria for the RPN assessment factors severity (S), occurrence (O), and detection (D). Analyze potential failures of each function of the molten-carbonate fuel cell (MCFC) system, battery system, and diesel engine components of the fuel cell-based hybrid power system set as evaluation targets to redefine the evaluation criteria, and the evaluation criteria were derived by identifying the effects of potential failures. In order to confirm the reliability of the derived criteria, the reliability of individual evaluation items was verified by using the significance probability used in statistics and the coincidence coefficient of Kendall. The evaluation was conducted to the external evaluators using the reestablished evaluation criteria. As a result of analyzing the correspondence according to the results of the evaluation items, the severity was 0.906, the incidence 0.844, and the detection degree 0.861. Improved agreement was obtained, which is a significant result to confirm the reliability of the reestablished evaluation results.

Verified
Journal Article
Open access
PDF file
SKSeongWan Kim
SeongWan Kim
Hyeon Min JeonHyeon Min Jeon
Hyeon Min Jeon
Chybyung ParkChybyung Park
Chybyung Park
Jongsu KimJongsu Kim
Jongsu Kim
In Korea, fishing boats account for 65,452 out of 71,174 coastal ships, and aging ships are a leading cause of environmental problems and economic loss. To solve this problem, the government has enacted a policy to promote the development and distribution of environmental vessels. Electric propulsion systems and hybrid systems are suggested as alternatives. However, to study whether this hybrid system is environmentally friendly, a system for measuring the performance of conventional diesel-powered ships was developed and measured. A case study applying the battery hybrid system was analyzed through a Matlab/Simulink simulation, and the effect of reducing the carbon dioxide emissions by 7.6% was verified. In addition, comparing with a case where the load-sharing optimal control was introduced, we proved that the carbon dioxide reduction with the controller was 10.7%. By applying the results of this study to various countries with different fuel production processes through the LCA technique, it was confirmed that the battery hybrid system is eco-friendly from the energy production stage, rather than unconditionally, according to the national power production method. Additional research is needed to reflect the aging trend of the entire fleet and to create a detailed category classification through future research.

5 February 2024 in Machines
Verified
Journal Article
Open access
PDF file
chan rohchan roh
chan roh
Hyeon Min JeonHyeon Min Jeon
Hyeon Min Jeon
SKSeongWan Kim
SeongWan Kim
Jongsu KimJongsu Kim
Jongsu Kim
NLNa-young Lee
Na-young Lee
SSSungwoo Song
Sungwoo Song
Global interest in environmentally friendly ships has surged as a result of greenhouse gas reduction policies and the demand for carbon neutrality. Despite growing demand for electric propulsion systems, there is a lack of research and development on crucial components. Efficiency and stability are primarily influenced by the performance of inverters, which are essential for driving propulsion motors. Existing inverter control techniques can be of two types: continuous-PWM (pulse width modulation) methods for harmonic performance enhancement and discontinuous-PWM methods for efficiency improvement by reducing losses. However, there are limitations in that each PWM method exhibits substantial variations in inverter performance based on its operating conditions. To address these challenges, this study proposes the hybrid pulse-width-modulation (HPWM) method for optimal inverter operation. By analyzing the inverter’s operating conditions, the proposed HPWM method adopts various pulse-width-modulation (PWM) strategies based on a modulation index to achieve harmonic improvement and loss reduction. Our focus is on comparing and analyzing diverse PWM techniques under varying modulation indices and frequency conditions to attain the optimal operating conditions. Experimental validation of the proposed method was conducted using a 2.2 kW dynamometer. In comparison with existing PWM methods, the proposed method demonstrated superior performance.