The present work proposes an experimental investigation and optimization of various process parameters during taper cutting of deep cryo-treated Inconel 718 in wire electrical discharge machining process. Taguchi's design of experiment is used to gather information regarding the process with less number of experimental runs considering six input parameters such as part thickness, taper angle, pulse duration, discharge current, wire speed and wire tension. Since traditional Taguchi method fails to optimize multiple performance characteristics, maximum deviation theory is applied to convert multiple performance characteristics into an equivalent single performance characteristic. Due to the complexity and non-linearity involved in this process, good functional relationship with reasonable accuracy between performance characteristics and process parameters is difficult to obtain. To address this issue, the present study proposes artificial neural network (ANN) model to determine the relationship between input parameters and performance characteristics. Finally, the process model is optimized to obtain a best parametric combination by a new meta-heuristic approach known as bat algorithm. The results of the proposed algorithm show that the proposed method is an effective tool for simultaneous optimization of performance characteristics during taper cutting in WEDM process
1 January 2011 in International Journal of Manufacturing Technology and Management
This paper discusses the application of the Taguchi method to optimise the machining parameters for machining of glass work-pieces in abrasive jet machining (AJM) for individual responses such as material removal rate and surface roughness. Moreover, a multi-response performance characteristic was used for optimisation of process parameters with application of grey relational analysis. The machining parameters are selected as pressure, nozzle-tip-distance, abrasive grain size where as the response variables selected as material removal rate (MRR) and surface roughness (R
The present study highlights a multi response optimization approach to determine the optimal process parameters in wire electrical discharge machining process during taper cutting operation. Experiments have been conducted using six process parameters such as part thickness, taper angle, pulse duration, discharge current, wire speed and wire tension each at three levels for obtaining the responses like angular error, surface roughness, and cutting speed. Taguchi's L27 orthogonal array is used to gather information regarding the process with less number of experimental runs. Traditional Taguchi approach is insufficient to solve a multi response optimization problem. In order to overcome this limitation, utility theory has been implemented, to convert multi-responses into single equivalent response called overall utility index. The weight for each criterion (response) is obtained by analytical hierarchy process (AHP) instead of using intuition and judgement of the decision maker. ANOVA analysis is also carried out to find out the significant effect of the process parameters during taper cutting in WEDM process. Finally confirmation test has been carried out to verify the result
Influence of machining process parameters on the tool flank wear (VBc) was investigated and optimized during turning silicon carbide particulate (SiCp) reinforced Al 7075 (Al 7075/SiCp) metal matrix composite (MMC) in heat treated condition. Metal removal was carried out by multilayer TiN coated tungsten carbide inserts in dry environment. Mechanism of tool failure was also studied. ANOVA revealed that the most significant machining parameter for VBc was cutting speed, followed by feed. Depth of cut was not significant. Quadratic response surface model was developed and its adequacy was verified.