Matias Mendez Larrain

Mr. Matias Mendez Larrain

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 July 2020 in International Journal of Pavement Research and Technology
Verified
Journal Article
Closed access
PDF file
RCRichard Campos
Richard Campos
MLMatias Mendez Larrain
Matias Mendez Larrain
Musharraf ZamanMusharraf Zaman
Musharraf Zaman
VPVictor Pozadas
Victor Pozadas

5 October 2017 in International Journal of Pavement Engineering
Verified
Journal Article
Closed access
ARA. S. M. Asifur Rahman
A. S. M. Asifur Rahman
MLMatias Mendez Larrain
Matias Mendez Larrain
RTRafiqul A. Tarefder
Rafiqul A. Tarefder
In this study, a regression-based predictive model is developed from laboratory test data to determine rutting performance of Superpave asphalt-aggregate mixtures. A Hamburg Wheel Tracking Device was used to measure the rutting performances of the asphalt concrete samples. A total of eighteen (18) asphalt concrete mixtures were tested and used in this study. Laboratory rut data were fitted by Weibull distribution and the Weibull parameters were correlated to the mix properties, such as, aggregate gradation, binder property, effective specific gravity of the aggregate and mix volumetrics of the asphalt concrete samples. Statistical evaluation showed that a fairly accurate estimation of rut depth can be found by using the regression-based predictive model developed in this study.

11 July 2018
Verified
Conference Paper
Closed access
BBBiswajit K. Bairgi
Biswajit K. Bairgi
RTRafiqul A. Tarefder
Rafiqul A. Tarefder
ISIvan Syed
Ivan Syed
MLMatias Mendez Larrain
Matias Mendez Larrain
MAMesbah Ahmed
Mesbah Ahmed
MRMd. Tahmidur Rahman
Md. Tahmidur Rahman
Lower production temperature and less aging make warm-mix asphalt (WMA) more prone to rutting. This study assessed rutting characteristics of WMA with chemical additives through laboratory experimentation and non-destructive field evaluation. To facilitate the study, three WMA mixtures and one control hot-mix asphalt (HMA) have been experimented. One of the WMA mixtures contained polymer modified binder. Hamburg wheel tracking (HWT) test has been conducted for laboratory experimentation. A recently developed method of HWT test analysis has been applied. Nondestructive field strength evaluation and automated pavement distress survey tools were utilized for field evaluation. It is found that chemical WMA exhibits equivalent or better rutting behavior compared to a HMA with a same binder and aggregate structure. Incorporation of polymer modifier in chemical WMA additives resulted in improved rutting characteristics and field strength.

13 October 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
MLMatias Mendez Larrain
Matias Mendez Larrain
SASyed Ashik Ali
Syed Ashik Ali
KHKenneth Hobson
Kenneth Hobson
Musharraf ZamanMusharraf Zaman
Musharraf Zaman
Pavement deterioration models provide the basis for predicting future changes in network conditions, estimating future funding needs, and determining the effectiveness and timing of maintenance and rehabilitation activities. Determining the accurate structural condition of pavements helps identify effective maintenance strategies which enhance the sustainability and service life of pavements. This study aimed to use the Traffic Speed Deflectometer (TSD) and Fast Falling Weight Deflectometer (FFWD) for project-level evaluation of pavements and use pavement properties to calibrate current models that help to predict the structural condition of pavements. Model parameters were calibrated to determine the effective structural number and tensile strains at the bottom of asphalt concrete for asphalt and composite pavements from TSD deflections. Tensile strains from the KENLAYER highlighted varied behaviors for composite pavements. A significant improvement in the calibration was observed for asphalt concrete pavements. While the TSD has higher daily operational costs than FWD, its per-mile cost is significantly lower, making it a viable choice for extensive coverage, even though the quantitative results might differ between the two devices.

13 October 2021 in Journal of Testing and Evaluation
Verified
Journal Article
Closed access
SGSagar Ghos
Sagar Ghos
SASyed Ashik Ali
Syed Ashik Ali
MZMusharraf Zaman
Musharraf Zaman
KHKenneth R. Hobson
Kenneth R. Hobson
MLMatias Mendez Larrain
Matias Mendez Larrain
MBMichael Behm
Michael Behm
Fatigue cracking is one of the major structural distresses in flexible pavements. In this study, probable causes of fatigue cracking were investigated using field and laboratory testing and In this study, probable causes of fatigue cracking were investigated using field ang laboratory testing and AASHTOWare Pavement ME Design (PMED) simulations. Field tests including Ground Penetrating Radar (GPR), Falling Weight Deflectometer (FWD), and Dynamic Cone Penetration (DCP) were performed on a flexible pavement section of US 412 located in Noble County, Oklahoma. Also, asphalt cores and soil samples were collected for laboratory testing. The GPR test results revealed significant delamination in the asphalt layer. Also, the GPR images indicated that the disturbance zone was confined within the asphalt layer and cracks were generated from surface as well as from existing pavement layers below. The DCP and FWD test results indicated that the pavement section was not structurally adequate to support traffic and needed rehabilitation in the near future. The moduli of the asphalt layers were found to be quite low, indicating improper compaction during construction. Also, the densities of the top-lifts of the asphalt cores were found to be low. Moreover, the cracking resistance of the extracted asphalt cores was poor based on the Illinois flexibility index test results. Superpave Performance Grade of the extracted binder indicated excessive aging of the binder because of long exposure to the environment. The brittleness of mix resulting from aging was considered a potential contributor to fatigue cracking of the pavement at this site. A parametric study was conducted to understand the variation of fatigue cracking with the changes in input properties in PMED, namely pavement structural components and material properties. Pavement thickness, roadway densities, and layer moduli of existing underlying pavement were found as the most influential factors. The findings of the parametric study supported the findings of the field and laboratory investigation.

30 March 2017
Verified
Conference Paper
Closed access
ARA. S. M. Asifur Rahman
A. S. M. Asifur Rahman
MLMatias Mendez Larrain
Matias Mendez Larrain
RTRafiqul A. Tarefder
Rafiqul A. Tarefder
Viscoelastic material functions of warm-mix asphalt are not well defined yet for reasons like relatively newer technology in United States and also varies with different technologies. The rutting performances of warm-mix asphalt are also relatively new. This study evaluates the effects of different warm-mix agents on the viscoelastic material functions and rutting performance of asphalt concrete. A control hot-mix asphalt and three warm-mix asphalt mixtures were collected from manufacturing plant with identical aggregate type, size distribution, and binder grade. The loose asphalt-aggregate mixtures are compacted, cored and sawed to cylindrical specimens for dynamic modulus and rutting resistance testing. A numerical method is used to convert complex modulus function to relaxation modulus and creep compliance. In essence, the warm-mix asphalt with water-free chemical agent showed higher stiffness characteristics. However, the warm-mix asphalt with surfactant-based WMA technology is found to be superior in terms of rutting performance, whereas, the warm-mix asphalt with water-free chemical agent is found to be inferior.