27 June 2015 in Construction and Building Materials
5 October 2017 in International Journal of Pavement Engineering
In this study, a regression-based predictive model is developed from laboratory test data to determine rutting performance of Superpave asphalt-aggregate mixtures. A Hamburg Wheel Tracking Device was used to measure the rutting performances of the asphalt concrete samples. A total of eighteen (18) asphalt concrete mixtures were tested and used in this study. Laboratory rut data were fitted by Weibull distribution and the Weibull parameters were correlated to the mix properties, such as, aggregate gradation, binder property, effective specific gravity of the aggregate and mix volumetrics of the asphalt concrete samples. Statistical evaluation showed that a fairly accurate estimation of rut depth can be found by using the regression-based predictive model developed in this study.
1 June 2018 in Journal of Cold Regions Engineering
Open graded friction course (OGFC) is used to reduce noise, improve friction, and for faster drainage of surface water of an asphalt pavement. However, OGFC’s contribution to low-temperature transverse cracking has not been documented yet in literature. This study investigates whether OGFC affects the low-temperature transverse cracking performance of asphalt concrete (AC). Cylindrical samples were prepared in the laboratory using an OGFC mix and a conventional AC mix in New Mexico. Laboratory tests, examining dynamic modulus ( ), indirect tensile strength (ITS), coefficient of thermal contraction (CTC), and creep compliance, were conducted. Low-temperature transverse cracking potentials of both OGFC and AC were evaluated using the test data. Results show that OGFC has less and CTC, higher ductility and creep compliance than the AC mix. This means that OGFC is less susceptible to low-temperature transverse cracking compared to the AC mix. This finding is validated using the field survey data. It is found that OGFC prevents the low-temperature transverse crack growth in asphalt pavement. Therefore, OGFC can be considered a good potential material to resist low-temperature transverse cracking, especially in cold regions.
1 March 2018 in Journal of Materials in Civil Engineering
The recently developed mechanistic-empirical design method of pavement uses the nationally calibrated dynamic modulus predictive model for the design and analysis of asphalt pavements. This study calibrates this model for the local Superpave asphalt concrete mixtures of New Mexico. Although the calibrated model shows good correlation, this study develops a new regression-based model which shows improved correlation with the tested data. A total of 54 asphalt-aggregate mixtures are compacted, cored, and sawed to cylindrical specimens and tested for dynamic modulus and phase angle. The time-temperature superposition principle is applied to develop master curves at a reference temperature of 70°F (21.1°C). The master curve parameters are correlated with the aggregate and binder properties. The local predictive models are validated for the dynamic modulus and phase angle of other AC mixtures which were not used to develop the models. Statistical evaluation shows that fairly accurate estimations of dynamic modulus and phase angle of the local mixes are possible by using these local predictive models.
8 January 2018 in Road Materials and Pavement Design
This study modifies the viscosity (η)-based Witczak dynamic modulus (|E*|) predictive equation which is used in the recently developed AASHTOWare pavement Mechanistic-Empirical design software. A total of 21 Superpave asphalt concrete mixtures with different gradations and binder grades were tested for |E*| at different temperatures and frequencies of loading. Results show that the η-based Witczak model underestimates the |E*| for New Mexico’s Superpave mixes. Therefore, the revised model is developed using regression analysis. A phase angle (φ) predictive model is also developed using the φ-values obtained during the |E*| testing. It was found that the revised η-based Witczak model determines the |E*| more accurately compared to the original η-based Witczak model.