For infrastructure health monitoring, defects in concrete are periodically inspected by hammering test. Conventional hammering inspection is manually conducted to detect internal concrete defects by recognizing the sounds generated from the hammer strike. Therefore, a robot-based hammering inspection system can realize the inspection automatically. However, those robots have several elements such as noise-resistant acoustic analysis, weight reduction of the robot, constant striking mechanism, and stable robot movement; so integrated research has not been achieved. This paper introduces a hammering inspection system using robot that solves these problems. In the proposed system, a multi-copter type mobile robot realizes a stable attitude on a structure using thrust force to press the robot body onto the structure surface, while a lightweight hammering mechanism constantly strikes a wall. During inspection, noises from multi-copter affect acoustic analysis. Therefore, the proposed method clarifies the features of hammering sound and propeller noise and analyzes hammering sounds. This developed hammering inspection system is the first to realize all functions required for comprehensive hammering inspection, and its accuracy to detect concrete defects from hammering sounds was 81.7% through the experiments.
Grass cutting is necessary to prevent grass from diverting essential nutrients and water from crops. Usually, in hilly and mountainous areas, grass cutting is performed on steep slopes with an inclination angle of up to 60° (inclination gradient of 173%). However, such grass cutting tasks are dangerous owing to the unstable positioning of workers. For robots to perform these grass cutting tasks, slipping and falling must be prevented on inclined surfaces. In this study, a robot based on stable propeller control and four-wheel steering was developed to provide stable locomotion during grass cutting tasks. The robot was evaluated in terms of locomotion for different steering methods, straight motion on steep slopes, climbing ability, and coverage area. The results revealed that the robot was capable of navigating uneven terrains with steep slope angles. Moreover, no slipping actions that could have affected the grass cutting operations were observed. We confirmed that the proposed robot is able to cover 99.95% and 98.45% of an area on a rubber and grass slope, respectively. Finally, the robot was tested on different slopes with different angles in hilly and mountainous areas. The developed robot was able to perform the grass cutting task as expected.
Periodic inspections are necessary in maintaining concrete infrastructures. As efficient and low-cost inspection methods, visual inspection robots and hammering inspection robots to detect cracks and internal defects have been developed, respectively. However, these robots can perform only a single task. To realize multiple tasks by a robot, multiple measurement sensors must be installed considering the stability of the robot on the wall and measurement performance. Parameters, such as weight and size, must be considered to ensure the stability of the robot on the wall. We proposed a propeller-type wall-climbing robot that can capture images and perform hammering simultaneously while moving on the wall. The static model of robot was established by considering various parameters, such as the direction of the propeller’s thrust force, weight, and placement of the measurement sensors. This model increases the payload for sensor installation and enables movement on dusty concrete walls with a low friction coefficient. The image captured by the inspection robot was employed for crack detection and width estimation. We confirmed that the hammering sounds generated by the robot showed different frequency characteristics on clear and defective areas. The developed inspection robot can collect adequate data for concrete health monitoring.
Dance has been made mandatory as one of the physical education courses in Japan because it can cultivate capacities for expression and communication. Among several types of dance education, creative dance especially contributes to the cultivation of these capacities. However, creative dance requires some level of particular skills, as well as creativity, and it is difficult to presuppose these pre-requisites in beginner-level dancers without experience. We propose a novel supporting device for dance beginners to encourage creative dance performance by continuously generating musical sounds in real-time in accordance with their bodily movements. It has embedded sensors developed for this purpose. Experiments to evaluate the effectiveness of the device were conducted with ten beginner-level dancers. Using the proposed device, the subjects demonstrated enhanced creative dance movements with greater variety, evaluated in terms of Laban dance movement description. Also, using the device, they performed with better accuracy and repeatability in a task where they produced an imagined circular trajectory by hand. The proposed interface is effective in terms of creative dance activity and accuracy of motion generation for beginner-level dancers.
Dance has become compulsory in the physical education courses in Japan, recently. Especially for the creative dance, it is possible to cultivate capacities for expression and communication abilities. However, it is hard to presuppose the creativity and skill of creative dance for beginner level dancers without experience. This paper describes a novel supporting method for the beginners by using a grasping-type musical interface. Our interface supports the user's performance continuously by generating sounds in real-time according to the bodily motions. Through the experiments, we show the effectiveness of the proposed supporting interface for beginner level dancers.
This paper describes a telescopic-arm type, climbing support robot. Although there are various kinds of wall climbing robots, there is a possibility that they may fall, due to the wall concavity/convexity or insufficient adhesion. To solve this problem, we developed the wall climbing support robot, which uses a telescopic-arm to support the climbing robot. The telescopic are includes a joint with sensors that detect the speed and direction of the climbing robot. The support robot follows and supports the movement of the climbing robot by follow-up control using detected parameters. With the aid of the support robot, the wall climbing robot can climb the wall more reliably and safely. We also provide experimental results which show that the proposed robot can support the climbing robot efficiently.