The Loess Plateau is one of the three most severely affected geological disaster areas in China. Water sensitivity is the most significant feature of the loess. Under the action of continuous heavy rainfall, rainwater infiltrates the loess, resulting in a rapid increase in soil saturation and changes in soil moisture. This affects the shear strength of the soil and induces shallow loess landslides. Therefore, it is significant to our country’s disaster prevention and mitigation efforts to effectively monitor the deformation and inducement of such landslides. At present, the global navigation satellite system (GNSS) is widely used in the field of landslide disaster monitoring as a technical means to directly obtain real-time three-dimensional vector deformation of the surface. At the same time, GNSS can also provide a steady stream of L-band microwave signals to obtain surface environmental information, such as soil moisture around the station. In past landslide disaster monitoring research, GNSS was only used to provide three-dimensional deformation information, and its ability to provide environmental information around the station was almost completely ignored. This study proposes a ground-based GNSS remote sensing comprehensive monitoring system integrating “three-dimensional deformation and soil moisture content” combined with a rainfall-type shallow loess landslide event in Linxia City. The ability of ground-based GNSS to comprehensively monitor shallow loess landslide disasters was analysed. Experiments show that GNSS can provide high-precision deformation time series characteristics and monitor the changes in soil moisture content around the station at the same time; the two have a certain response relationship, which can comprehensively evaluate the stability of shallow loess landslides. As heavy rainfall is a key factor affecting the change in soil water content, this study adds the atmospheric water vapour content calculated by ground-based GNSS refraction remote sensing in the discussion chapter and analyses the relationship between precipitable water vapour and rainfall in this area to give full play to ground-based GNSS remote sensing. In the role of landslide disaster monitoring, we hope to build a more comprehensive ground-based GNSS remote sensing monitoring system to better serve the monitoring of landslide disasters.
The new-generation photon-counting laser altimeter aboard the Ice, Cloud, and Land Elevation Satellite-2 (ICESat-2) has acquired unprecedented high-density laser data on the global surface. The continuous analysis and calibration of potential systematic biases in laser data are important for generating highly accurate data products. Current studies mainly calibrate the absolute systematic bias of laser altimeters based on external reference data. There are few studies that focus on the analysis and calibration of relative systematic biases in long-term laser data. This paper explores a method for systematic biases analysis and calibration of ICESat-2 laser data based on track crossovers for the first time. In the experiment, the simulated data and ICESat-2 data were used to verify the algorithm. The results show that, during the three-year period in orbit, the standard deviation (STD) and bias of the crossover differences of the ICESat-2 terrain data were 0.82 m and −0.03 m, respectively. The simulation validation well demonstrate that the crossover adjustment can calibrate the relative bias between different beams. For ICESat-2 data, the STD of the estimated systematic bias after crossover adjustment was 0.09 m, and the mean absolute error (MAE) was 0.07 m. Compared with airborne lidar data, the bias and root mean square error (RMSE) of the ICESat-2 data remained basically unchanged after adjustment, i.e., −0.04 m and 0.38 m, respectively. This shows that the current ICESat-2 data products possess excellent internal and external accuracy. This study shows the potential of crossover for evaluating and calibrating the accuracy of spaceborne photon-counting laser altimeter data products, in terms of providing a technical approach to generate global/regional high-accuracy point cloud data with consistent accuracy.
21 November 2023 in IEEE Transactions on Geoscience and Remote Sensing
The Ice, Cloud and Land Elevation Satellite (ICESat-2) offers an unprecedented high density of laser data on the Earth’s surface. Evaluation and calibration of geolocation errors are important for the scientific application of laser data. In this study, a crossover method is proposed to evaluate and calibrate errors. This method mainly relies on small-scale reference data and consistency conditions at the trajectory crossovers. By matching the profile measurements of the ascending and descending altimeter tracks to find the location where the crossover discrepancy is minimized, the geolocation errors of the wide-area laser data are estimated. Three years of ICESat-2 measurements over the Ridgecrest (CA19) in the southern United States and McMurdo Dry Valleys (MDV) in eastern Antarctica were used to test the performance of the method. It was shown that the method can be used to estimate the geolocation error of the ICESat-2 laser data, which ranged from 4.65 m to 5.62 m for both sites. After calibration, the mean absolute error of the crossover discrepancies was reduced by approximately 50%. In addition, with the reference digital elevation model (DEM) as the true value, the elevation accuracy (RMSE) of the laser data at the CA19 site improved from 0.38 m before calibration to 0.34 m after calibration, and the improvement at the MDV site was even more significant, about 0.22m. In conclusion, the proposed method is effective and feasible and can improve the consistency of long-period laser data quality in large areas.
14 November 2025 in IEEE Geoscience and Remote Sensing Letters
The ice, cloud, and land elevation Satellite-2 (ICESat-2) has been operating continuously in orbit for nearly seven years. Its accuracy is crucial for ensuring the reliability of scientific applications. However, a few external studies have been conducted to assess the long-term consistency of ICESat-2 elevation measurements. In this letter, we evaluate the consistency of elevation accuracy through footprint-level crossover observations. This approach first extracts crossovers by averaging elevations within each ~12 m footprint, then analyzes their elevation differences using statistical and time-series approaches, and finally employs airborne LiDAR data for external validation. The results indicate that ICESat-2 elevation data exhibit excellent internal consistency over bare land areas from 2019 to 2024, with more than 40000 footprint-level crossovers, a mean elevation bias of 0.02 m, and a standard deviation of 0.22 m. The long-term drift of the elevation data is approximately 1.1 mm/yr, well within the mission’s scientific requirement of 4 mm/yr. Compared with airborne LiDAR, ICESat-2 maintains high external accuracy over long-term observations, with an overall root mean square error (RMSE) less than 0.38 m across 377 beam tracks. Overall, this study provides new and independent assessment of the consistency of ICESat-2 elevation data to date.
About Me
Tao Wang, PhD student. His main research areas are on-orbit calibration and data processing of spaceborne laser altimeter.
Tao Wang, PhD student. His main research areas are on-orbit calibration and data processing of spaceborne laser altimeter.